高性能小型扫描器

本文讨论了一种高性能小型扫描器的基本原理及扫描时序变换。对采用该小型扫描器的热成像系统也作了详细的介绍。该小型扫描器可满足多种用途。     

攀钢转炉炼钢用碳化硅提温的试验研究

低品位碳化硅是转炉炼钢的有效提高温剂。工业性试验结果表明，碳化硅加入８．０ｋｇ／ｔ钢水提温４０．３－７０．３℃（平均４８．４℃）；渣中ＴＦｅ降低１．３％；加提温剂有利于转炉内造渣脱硫和碱少炉渣对耐火砖的侵蚀。文中还给出了攀钢转炉半钢冶炼铸用钢不水时加与不加碳化硅的ｔλ，［Ｃ］λ区域。     

Modeling of a power electronic converter for EMC in the conduction emission frequency band

With the advancement of high‐frequency switching devices, electromagnetic interferences (EMI) have become problems in power electronic converter designs. It is necessary for an electromagnetic compatibility (EMC) design to prospect and consider its possible EMI levels. This paper describes how to compute effects from a power converter to an object point to reduce conduction EMI noises effectively by an appropriate design. Modeling techniques for converter elements are discussed for a model in the conduction emission frequency band by the parameter tuning method and for line constants by an analytical derivation. Then a derived model is simulated for harmonic distributions of loop currents and their magnetic fields. © 2002 Scripta Technica, Electr Eng Jpn, 139(1): 44–50, 2002: DOI 10.1002/eej.1145     

静电驱动悬臂梁数模转换器设计、分析与模拟

提出了一种新型的微电子机械数模转换器 (MEMDAC)———静电驱动悬臂梁数模转换器 .与传统的静电驱动悬臂梁执行器相比 ,新的结构能更精确地控制梁的挠度 .文中给出了此MEMDAC的设计、分析和模拟过程 .有限元(FEA)分析表明此MEMDAC的最大输出位移为 1 5 1μm ,分辨率为 0 1μm ,其最大非线性误差为 0 0 3μm .     

内嵌闪存MCU的高性能多通道24位采集系统ADuC845

ADuC845是ADI公司新推出的嵌有单指令周期8052闪存MCU、带两路24位∑ -△A/D、双12位D/A以及两个灵活脉宽调制输出的高性能24位数据采集与处理系统芯片。该芯片的数据处理速度达12MIPS,且设计简单 ,噪声低 ,非常适用于精密仪器仪表。文中详细介绍了该芯片的功能特点和工作原理 ,给出了该芯片的应用方法。     

Development of a fast neutron radiography converter using wavelength-shifting fibers

A fluorescent converter for fast neutron radiography (FNR) comprising a scintillator and hydrogen-rich resin has been developed and applied to electronic imaging. The rate of the reaction between fast neutrons and the converter is increased by thickening the converter, but its opaqueness attenuates emitted light photons before they reach its surface. To improve the luminosity of a fluorescent converter for FNR, a novel type of converter was designed in which wavelength-shifting fibers were adopted to transport radiated light to the observation end face. The performance of the converter was compared with that of a polypropylene-based fluorescent converter in an experiment conducted at the fast-neutron-source reactor YAYOI in the University of Tokyo.     

基于片上DC-DC的CMOS光接收机前置放大器

利用CSMC 0.6μm CMOS工艺,设计了基于片上DC-DC转换器的光接收机前置放大器。电路采用可调跨阻放大器与片上DC-DC结构,有效地克服了单端跨阻放大器易受电源波动的干扰,并解决了高灵敏度与低失真相互矛盾的问题。模拟结果表明,输入动态范围为83 dB(峰-峰值=0.2μA~3 mA),等效输入电流噪声为1.2 pA/Hz(155 MHz),可稳定工作在155 Mb/s速率上;在5 V电源电压下,功耗为95 mW。     

光通信技术讲座--(五):WDM系统光节点器件

介绍WDM系统光节点所用到的器件,如波长转换器、光分插复用器及其使用的光隔离器和光环形器.     

无刷双馈电机极数的选择

将三种极对数的无刷双馈电机(BDFM)与一台绕线转子感应电机进行比较研究。用双向变频器对BDFM进行速度控制，做到减小额定值，并可以实现对BDFM的转速和功率因数进行控制。本文说明了选择变频器的额定值和BDFM的极对数的方法。     

氨合成塔出口氨含量偏低原因分析及对策

阐述UHDE合成塔运行现状 ,分析氨净值达不到设计值的原因 ,提出相应的解决措施