On the microhardness testing of electrically stressed poly(phenylene oxide): Polystyrene blends

Microhardness measurements have been performed on untreated (virgin) and electrically stressed, solvent‐cast laboratory‐prepared samples of pure poly(phenylene oxide) (PPO), pure polystyrene (PS), and PPO : PS polyblends with different weight proportions. Results of such measurement on untreated polyblend sample show that microhardness (H_v) increases with increase in the content of PS up to 10 wt %, which attributed to the existence of homogeneous phase morphology. However, this feature is not observable in samples containing higher content of PS. Electrical stress is found to modify considerably the mechanical property of polymer. The effect of electric field on the microhardness of such samples (PPO : PS :: 90 : 10) has been characterized by the existence of a peak. Trapping of charge carriers in electrically stressed samples imparts hardening to the polyblend up to an applied step field of 190 kV/cm. However, the excessive charging beyond this step field value destroys this characteristic. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

电容比和方向性对自给能γ剂量计探头的影响

本文给出了自给能γ剂量计探头在γ射线照射下积累电荷的测量结果，讨论了电容比和方向性对自给能γ剂量计探头的影响以及探头的饱和点。     

Physical Properties Important to Electrostatic and Non electrostatic Powder Transfer Efficiency in a Tumble Drum

ABSTRACT: Popcorn was oiled and coated in a tumble drum nonelectrostatically and electrostatically with sugar, cornstarch, salt, cellulose, maltodextrin, all-purpose flour, whole-wheat flour, or soy flour. Particle size, density, flowability, and chargeability were correlated to transfer efficiency using regression analysis. Of the various methods to measure chargeability, charge-to-mass and adhesion improvement were the most significant. For nonelectrostatic coating, small, dense, free-flowing powders were most efficient. Small, free-flowing highly charging powders were most efficient for electrostatic coating. Percent improvement was the highest for the least efficient powders. The greatest benefit with electrostatic coating was for low density, highly charging powders with no effect of size.     

日产1000t水泥熟料生产线的提产措施

通过对五级旋风筒下料管、回转窑转速、配料方案、物料稳定等四方面进行改进,达到提产目的。     

单孔护壁爆破数值模拟

运用LS-DYNA软件对单孔护壁爆破和切缝药包爆破进行了三维数值模拟,结果显示,由于PVC-U套管的存在,作用于孔壁的爆炸应力波峰值被显著削弱,降低率达到30%～46%,并推迟了其到达保留岩体孔壁时间.与传统的切缝药包爆破相比,保留岩体损伤更小.     

条形药包药量计算公式探讨

本文通过现有诸药量计算公式的总结和统计分析，认为经验函数划（ｎ）以二次式较合适。并根据流体动力学理论和临界能量密度破碎准则，推导出ｆ（ｎ）的二次项公式，得ｑ＝ＫＷ２（１十ｎ２）／２；该式较符合实际，故推荐供参考。     

压制球形药包解决退模问题的技术措施

文中简要阐述了在制备球形药包过程中,为解决压装药件的退模问题所采取的技术措施,并提出了较佳的成型底座的设计方案。     

高梯度加速管的束流传输

对不同能量、不同质量数、不同初始条件的入射束和有无空间电荷效应的离子束流在高梯度加速管中的传输进行了计算，并讨论了一些影响加速管聚焦作用的主要因素，计算结果与实际情况相符。     

HIN2xxE系列RS-232收发器的原理及应用

HIN2xxE系列是由＋5V单电源供电的高速RS-232收发电路，符合EIARS-232C和V．28规范，以电源功耗低为显著特点，广泛应用于ISDN和高速调制解调器，尤其是电池供电系统中。文中主要介绍HIN2xxE系列电路的原理、特性和典型应用。