基于移位原理的顺序控制器研究

本文根据PLC顺序控制程序的设计思路,阐述了用常用集成数码移位寄存器、电力电子开关电路和少量外围电子元件构成移位控制器的原理,根据此设计思路制作的移位控制器经过在实验室环境下运行,证明了设计方案的可行性。     

高速遥传系统配接DTB总线仪器的接口设计

FPGA（field programmable gate array）技术已经成为当今实现电子线路集成化的重要方法之一。通过应用PFGA和单片机技术，设计一种接口电路，用于将CSU和SKC数控系统中DTB总线的井下仪器挂接到高速 遥传系统上，从而大大提高高速电缆遥传系统的兼容性，使其应用范围更广，市场前景更好。     

单光子时间分辨在线谱仪系统中的接口电路

本文介绍单光子时间分辨在线谱仪系统中的多道分析器与IBM PC/XT微型计算机接口的工作原理及控制程序。     

卫星遥感测控的系统融合技术

卫星遥感测控系统包括运载火箭飞行测控，卫星运行测控，有效载荷设备测控以及它本身应完成的遥感测量，高效完备的系统融合技术采用包括视频综合技术，统一载波宽带传输技术，地面站多功能统一测控技术，软件化技术，载波综合利用技术等，大大简化了卫星遥感的测控设备。     

CAD8903机芯的视频音频转换电路设计

本文概要介绍了CAD 8903机芯采用国产集成电路CD7680,CD74211,DG4053实现音频、视频切换功能的电路,并对CD7680中音频信号处理电路的特殊用法进行了说明。     

电流模式n阶传输函数的OA-OTA实现

提出了一种新的实现任意 n阶电流模式传输函数的网络结构。该电路仅含运算放大器 (OA)和运算跨导放大器 (OTA)有源器件 ,因而适于全集成。适当设置 OTA的跨导值能实现任意高阶传输函数 ,且传输函数的系数可独立调整。文中推导了滤波器的设计公式 ,并给出了截止频率为 1 0 0 k Hz的三阶巴特沃斯低通滤波器实例 ,PSPICE仿真结果表明所提电路及设计公式是正确的     

微波BJT超宽带低噪声放大器的设计

本文给出了一种频带覆盖达１０－１６００ＭＨｚ的微波ＢＪＴ超宽带低噪声放大器的设计方法，从微波ＢＪＴ的噪声模型出发，通过拟合５０Ω源阻抗下微波ＢＪＴ的噪声系数ＮＦ５０和Ｓ参数来提取其噪声参数，然后根据增益，噪声及驻波比要求优化设计放大器，使放大器在超宽带范围内获得平坦增益和低噪声，本文所给出的微波ＢＪＴ惨数提取及放大器优化设计方法已由实验结果所验证。     

Trade-off analysis on cost and manufacturing technology of an electronic product: Case study

A trade-off analysis on the cost and system packaging metrics of an electronic product aimed at the commercial/retail industry has been carried out. By comparing the system cost and packaging metrics with those of comparable consumer products, we have determined that there is opportunity for significant cost, size, and weight reduction of the overall electronics packaging system. These include the use of fine pitch IC packages, smaller discrete components, denser PCB wiring technology, double sided IC package surface mount, surface mount connectors, and improved plastics for the product housing. The analysis concluded that PCB area reduction of 40%, using a single PCB instead of three boards, reduction in board cost of over 50% and product weight reduction of over 28% are possible using available technologies.     

Mixed-Signal Circuit Classification in a Pseudo-Random Testing Scheme

Pseudo-random testing techniques for mixed-signal circuits offer several advantages compared to explicit time-domain and frequency-domain test methods, especially in a BIST structure. To fully exploit these advantages a suitable choice of the pseudo-random input parameters should be done and an investigation on the accuracy of the circuit response samples needed to reduce the risk of misclassification should be carried out. Here these issues have been addressed for a testing scheme based on the estimation of the impulse response of the device under test (DUT) by means of input-output cross-correlation. Moreover, new acceptance criteria for the DUT are suggested which solve some ambiguity problems arising if the classification of the DUT as good or bad is based on a few samples of the cross-correlation function. Examples of application of the proposed techniques to real cases are also shown in order to assess the impact of the measurement system inaccuracies on the reliability of the test.     

砖烟囱集团装药定向爆破拆除

对一座 40 m 高的砖烟囱,采用TNT集团装药实施定向倒塌拆除爆破.介绍了该烟囱拆除爆破工艺技术,爆破参数和施工方法.