天铁炼铁技术进步

近十年来，天铁集团炼铁厂通过改善原燃料条件；优化炉料结构，提高入炉品位；采用提高炉顶压力、富氧喷煤、低硅冶炼、炉顶气象系统等多项先进技术，使高炉各项经济技术指标逐年提高。     

石门电厂燃用煤的煤焦燃尽特性研究

针对石门电厂燃用煤,运用热天平,采用热分析法进行了分析研究,有效地评估了该电厂燃用煤的燃尽特性,为燃煤锅炉的设计、运行及技术改造提供了基础数据。     

入炉煤分炉计量系统的应用探讨

介绍了江西贵溪发电厂的入炉煤分炉计量系统在节能方面开展的一些应用情况。     

型煤发展的回顾与展望

煤炭科学研究总院建院以来型煤研究工作的进展状况、主要成果,并对几项工业型煤技术进行了概述和评价,还对今后型煤研究方向提出了建议。     

Modified oil agglomeration process for coal beneficiation. III. Grinding and agglomeration using different szego mill designs

The simultaneous grinding/agglormeration process has been used to beneficiate Minto coal. Experiments with the Szego Mill, a planetary ring-roller mill with grooved rollers, have given good results. Different roller ridge/groove sizes have been tested and favourable oil-coal-water ratios established. Ash removal is closely related to grinding performance. Very short mill residence times, of the order of 10 seconds, are sufficient for microagglomerate formation. Considerable equipment and operating cost savings are possible with the modified process.     

高压注水在综放工作面的应用

介绍了综采煤层注水软化工艺的原理 ,钻孔布置方法以及生产实际中的应用情况     

调整煤源结构优化炼焦煤质量管理

介绍了湘钢在调整煤源结构、优化炼焦煤质量管理方面所做的一些工作。近年来 ,湘钢依靠科技进步 ,坚持精料方针 ,不断强化企业管理 ,使焦炭质量有了较大的提高 ,为降低高炉焦比 ,提高高炉的利用系数做出了应有的贡献     

济钢350m^3高炉高富氧生产技术

分析了济钢350m^3高炉高富氧对产量,理论燃烧温度,炉况顺行状况,焦比和生产效益的影响,高富氧可提高产量,但升高焦比和高炉理论燃烧温度,一定程度上影响高炉顺行,存在富氧效益最大化的适宜富氧率.高炉生产应低富氧高喷煤,根据钢目前的情况,富氧率经2%-3%为宜.     

New chemical structural features of coal. The structure of coal products

The object of this paper is to demonstrate the usefulness of the transalkylation reaction for determining chemical structural features of products derived from coal. For example, the method is applied to derivatized coals, coals modified by thermolysis, and materials physically or chemically separated from coals. Data are presented for the pyridine soluble and insoluble parts of two coals, an O-methylated coal, a Birch reduced coal, a solvent refined coal, and a coke. Similarities and differences in chemical make-up of these materials are discussed.     

洗煤厂渣浆泵的一种机械调速方法

某洗煤厂渣浆介质泵介质密度高,负荷较重,导致拖动该渣浆泵的异步电动机接近过负载,电动机定子绕组发热严重.同时,渣浆泵在运行中调节出口阀门控制流量,致使出口压力偏大,给设备安全运行带来不利影响.针对以上问题,改用机械调速方式,对存在的问题进行了解决,并取得较好的节电效果.