Thermodynamic calculation of S−Sb system and Cu−S−Sb system

Sb₂S₃ and CuSbS₂ have been proposed as alternative earth-abundant absorber materials for thin-film solar cells. However, no thermodynamic study of the S−Sb binary system and the Cu−S−Sb ternary system were investigated. In this paper, The S−Sb system and the Cu−S−Sb system are calculated utilizing the so-called CALPHAD (CALculation of PHAse Diagrams) technique. Using TEM-EDS and XRD, Cu_0.9Sb₁S₂ is experimentally confirmed at the Cu₁Sb₁S₂ and Sb₂S₃ two-phases region in the isothermal section at 673 K of the Cu−S−Sb ternary system. Given the asymmetric shape and miscibility gap of the liquidus in the S−Sb phase diagram, the associate solution model for the liquid phase is adopted. The solution phases (liquid, bcc, fcc) are treated with the Redlich–Kister equation. The compounds S₃Sb₂, Cu₃SbS₃, Cu₁₂Sb₄S₁₃, CuSbS₂, and Cu₃SbS₄ are described as a stoichiometric compound. A set of self-consistent thermodynamic parameters of the S−Sb binary system and the Cu−S−Sb ternary system are obtained. The calculated results are in good agreement with the experimental data. This study provides a set of reliable thermodynamic parameters to the Cu−Sb−S thermodynamic database, and a cost-effective tool to design material synthesis experiments and manufacturing processes.     

基于IEC61131-3标准的PLC编辑模块设计与实现

基于IEC61131-3标准设计一个可编程逻辑控制器（PLC）编辑模块,并给出了主要数据结构和算法的设计。通过测试表明用户界面友好,操作简单,对后续开发具指导意义。     

一种基于UML状态图的规约变异测试方法

规约变异测试从软件功能的角度,对规约进行分析,从而揭示规约中存在的问题。本文提出一种基于UML状态图的变异测试方法,针对每种变异算子,分析其是否会引入冲突,进而有效避免不合理的变异操作;分析了每种变异算子产生等价变异体的条件,能够在生成变异体的同时检测并移除等价变异体,进而减少其对测试过程的影响;给出了杀掉每种变异体所需满足的条件,可在此基础上产生杀掉特定变异体所需的测试用例,从而提高测试用例集的质量。在此基础上,根据变异算子的实际功能,整合了功能相同的算子,减少了变异算子的数量,从而进一步降低了变异测试的开销。实验结果表明,本方法能够较好地提高测试用例的质量,进而提升测试的效率。     

A faster divide-and-conquer algorithm for constructing delaunay triangulations

An easily implemented modification to the divide-and-conquer algorithm for computing the Delaunay triangulation ofn sites in the plane is presented. The change reduces its (n logn) expected running time toO(n log logn) for a large class of distributions that includes the uniform distribution in the unit square. Experimental evidence presented demonstrates that the modified algorithm performs very well forn2¹⁶, the range of the experiments. It is conjectured that the average number of edges it creates—a good measure of its efficiency—is no more than twice optimal forn less than seven trillion. The improvement is shown to extend to the computation of the Delaunay triangulation in theL _p metric for 1<p.This research was supported by National Science Foundation Grants DCR-8352081 and DCR-8416190.     

65Mn钢CCT曲线及圆锯片淬火工艺

用全自动相变测定仪测定了圆锯片常用６５Ｍｎ钢的连续冷却转为曲线，研究了不同连续冷却速度下得到的组织，为合理制订圆锯片的淬火工艺提供了依据，得到了最佳淬火工艺曲线。     

Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method

The crystal plasticity was implemented in the finite element method（FEM） software ABAQUS through the user subroutine UMAT. By means of discretizing the space at the grain level with the Voronoi diagram method, a polycrystal model was built and used in the FEM analysis. The initial orientation of each grain was generated based on the orientation distribution function（ODF）. The developed model was successfully applied in simulation of polycrystalline aluminium samples deformed by the tensile tests. The theoretical strain--stress relation was in good agreement with the experimental result. The simulation results show that the grain size has significant effect on the deformation behavior. The initial plastic deformation usually occurs at grain boundaries, and multiple slip often results in an enhanced local hardening at grain boundaries.     

电缆化配电系统高频谐振频移方法

为解决电缆化配电网高频谐振问题,提出了一种基于配电网阻抗重构的高频谐振频移方法。首先,分析了电缆化配电网高次谐波源与高频谐振的产生机理。其次,给出了电缆化配电网阻抗重构的高频谐振频移方法,并比较不同无源阻抗重构后的频移及谐振峰抑制效果。然后,结合实际工程案例,利用系统函数绘出伯德图与根轨迹评价该方法对高频谐振治理效果以及系统稳定性的影响,验证了基于电缆化配电网阻抗重构的高频谐振频移方法的有效性,最后研究了无源阻抗参数变化对配电网高频谐振的影响。     

提高淬火模拟精度的系统化处理方法

为了提高淬火过程计算机模拟精度，提出了“系统化处理”方法。该方法以数学模型为基础。以试验结果为依据，根据冷却曲线和组织转变量用反计算方法求出数学模型中包含的材料和介质的物理参数，如热扩散系数、导热系数、相变潜热(相变温升)、扩散型相变动力学参数和热通量等。用标准探头测试热通量，其他参数用试验材料做成一个圆柱试样在淬火过程的两条或三条冷却曲线和不同半径上的组织转变量计算出来。该方法不仅可以获得计算中用到的物理参数。而且减小了计算误差。温度的最大计算误差约10℃，组织转变量的最大计算误差约10％。     

纱线烘干系统的PLC改造与应用

介绍了烘房烘干的工艺过程，及应用PLC在该系统中进行电气控制系统改造，使系统烘干质量高，工作可靠，设置、操作简单，提高了生产效率。