降低玻璃钢产品的收缩及变形的实验研究

本文介绍了如何通过控制原材料的选用、玻璃钢产品的成型工艺、加入填料、模具结构设计来最大限度的减少铁路客车用玻璃钢(FRP)产品的收缩及变形。     

纺牵—步法中粗旦丙纶长丝沸水收缩率初探

在纺牵联合一步法纺丝机上研究了丙纶切片的熔融指数对纤维沸水收缩率的影响，发现熔融指数高的切片，其纤维的沸水收缩率变化大。沸水收缩率随热定型的温度升高而下降。沸水收缩率可根据用户提供中心值（Ｍ）通过实验确定，一般以Ｍ±１．５为宜。     

Strength, durability and micro-structural aspects of high performance volcanic ash concrete

This paper presents the results of investigations to assess the suitability of using volcanic ash (VA) as a cement replacement material to produce high performance concrete. Tests were conducted on concrete mixtures replacing 0 to 20% by mass of ordinary Portland cement (OPC) by VA. The performance of high performance volcanic ash concrete (HPVAC) mixtures was evaluated by conducting comprehensive series of tests on fresh and hardened properties as well as durability. The mechanical properties were assessed by compressive strength, while durability characteristics were investigated by rapid chloride permeability (RCP), drying shrinkage (DS), mercury intrusion porosimetry (MIP), differential scanning calorimetry (DSC) and microhardness tests. HPVACs showed better durability properties compared to control concrete with 0% VA. The improved performance of HPVACs was attributed to the refinement of pore structure, and pozzolanic action of VA. HPVAC having a minimum 28-day compressive strength of 60 MPa can be obtained by replacing up to 20% (by mass) of cement by VA. Development of non-expensive and environmentally friendly HPVAC with acceptable strength and durability characteristics (as illustrated in this study) is extremely helpful for the sustainable development and rehabilitation of volcanic disaster areas around the world.     

墙地砖边缘检测中的小波去噪

在墙地砖的边缘检测过程中,噪声的引入是不可避免的,有效地消除噪声而不影响检测结果是检测过程中需要解决的关键问题。本文采用了小波去噪方法—对图像进行去噪后再进行边缘检测的方法,其检测结果较好地满足了检测要求。     

Classification of cardiac sound signals using constrained tunable-Q wavelet transform

The features extracted from the cardiac sound signals are commonly used for detection and identification of heart valve disorders. In this paper, we present a new method for classification of cardiac sound signals using constrained tunable-Q wavelet transform (TQWT). The proposed method begins with a constrained TQWT based segmentation of cardiac sound signals into heart beat cycles. The features obtained from heart beat cycles of separately reconstructed heart sounds and murmur can better represent the various types of cardiac sound signals than that from containing both. Therefore, heart sounds and murmur have been separated using constrained TQWT. Then the proposed novel raw feature set has been created by the parameters that have been optimized while constraining the output of TQWT together with that of extracted by using time-domain representation and Fourier–Bessel (FB) expansion of separated heart sounds and murmur. However, the adaptively selected features have been used to obtain the final feature set for subsequent classification of cardiac sound signals using least squares support vector machine (LS-SVM) with various kernel functions. The performance of the proposed method has been validated with publicly available datasets and the results have been compared with the existing short-time Fourier transform (STFT) based method. The proposed method shows higher percentage classification accuracy of 94.01 as compared to 93.53 of STFT based method. In comparison with STFT based method, it is noteworthy that the proposed method uses well defined and lower dimensionality of feature vector that can reduce the computational complexity.     

Contraction stress build‐up of anisotropic conductive films (ACFs) for flip‐chip interconnection: Effect of thermal and mechanical properties of ACFs

The important mechanical mechanism for the electrical conduction of anisotropic conductive films (ACFs) is the joint clamping force after the curing and cooling processes of ACFs. In this study, the mechanism of shrinkage and contraction stress and the relationship between these mechanisms and the thermomechanical properties of ACFs were investigated in detail. Both thickness shrinkages and modulus changes of four kinds of ACFs with different thermomechanical properties were experimentally investigated with thermomechanical and dynamic mechanical analysis. Based on the incremental approach to linear elasticity, contraction stresses of ACFs developed along the thickness direction were estimated. Contraction stresses in ACFs were found to be significantly developed by the cooling process from the glass‐transition temperature to room temperature. Moreover, electrical characteristics of ACF contact during the cooling process indicate that the electrical conduction of ACF joint is robustly maintained by substantial contraction stress below T_g. The increasing rate of contraction stresses below T_g was strongly dependent on both thermal expansion coefficient (CTE) and elastic modulus (E) of ACFs. A linear relationship between the experimental increasing rate and E × CTE reveals that the build‐up behavior of contraction stress is closely correlated with the ACF material properties: thermal expansion coefficient, glassy modulus, and T_g. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2634–2641, 2004     

环氧丙烯酸树脂的合成研究

研究合成了一种环氧丙烯酸树脂,该树脂既具有环氧树脂优良的黏结性能、收缩率低等特点,又克服了其抗冲击性差的缺点,还可以室温固化,应用广泛.     

基于Hilbert曲线和位置自调节法的图像版权保护算法

以小波的相关理论为基础,先把水印图像预置乱处理,对宿主图像直接进行小波包分解,之后将水印的低频部分和中高频部分分别采用Hilbert曲线扫描和位置自调节法嵌入到宿主图像中,嵌入强度可根据图像的内容自适应调节。通过实验观察,新算法在抗压缩和抗剪切性能有所提升,同时隐蔽性和抗噪能力也得到了较大改观,结果充分说明该算法是一种性能较为优良的图像版权保护算法。     

基于退化四元小波变换的纸币识别

针对如何提取纸币图像特征和提高识别率的问题,综合利用退化四元小波变换具有的相位特性,提出一种基于退化四元小波变换的纸币识别方法.该方法首先对采集的纸币图像进行倾斜校正和边缘检测,然后运用退化四元小波对纸币图像进行分解操作,并对分解系数进行统计分析,将每个分解子带系数的能量和标准差作为该纸币图像的特征向量,最后将支持向量机作为分类器对纸币图像进行识别.本文方法在资源约束的嵌入式清分系统上实现,实验结果表明采用本文提出的算法突破了传统纸币识别系统识别率很难再提高的瓶颈,同时能够满足清分系统的实时性要求.     

柔软热收缩材料的研制

总结了经共混和辐射交联制备柔软耐老化的热收缩材料的研制过程。测得了不同乙丙橡胶含量和不同辐照剂量下的共混物的力学性能和凝胶含量，确定了共混物辐射交联的合适剂量。此外，还测试了ＥＰＤＭ和ＰＥ共混物经辐照后的耐油性能。在此基础上，制得了手感柔软的热收缩管材。