多区双重介质复合气藏渗流数学模型及其压力动态

四川盆地大多数气藏属于裂缝孔隙型气藏,气藏非均质性强.经典的径向均质复合试井解释模型与气藏实际情况不相符,解释结果与实际地质情况出现抵触现象.针对这种情况,建立了多区双重孔隙介质复合地层模型,求得了该模型的拉氏空间解,分析了其典型的压力动态特征,并对影响因素可能对曲线产生的影响进行了分析.     

A New Comb Circular Polarizer Suitable for Millimeter‐Band Application

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter‐band application because of its simple structure and low fabrication cost. In our experiments the dual‐band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.     

H.264/AVC技术进展及其务实发展策略思考

结合NGN及3G演进的固定、移动视频业务实际需求状况，论述H．264／AVC的重要技术进展及其务实发展策略。     

Antenna-array pattern nulling using a differential evolution algorithm

A new method based on the differential evolution (DE) algorithm is proposed for antenna-array pattern synthesis with prescribed nulls. The array excitation amplitudes are the only controlling parameters, and the objectives are to synthesize array patterns with nulls imposed on directions of interferences while keeping the sidelobe levels (SLLs) below prescribed levels. Many factors such as the excitation dynamic range ratio, null depth level, null width, and SLLs are taken into account in the synthesis. Simulation results of several typical problems are compared with published results to illustrate the effectiveness of the proposed method. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 14: 57–63, 2004.     

水量还原方法及合理性检查

文中详细地阐述了取河水、井水、水库水、跨流城引(排)水等不同情况进行还原的具体方法步骤。并对水量还原成果提出合理性检查措施。     

IEEE 802.11g性能分析及应用

全面介绍IEEE802.11g标准的无线局域网,详细讲述IEEE802.11g草案标准的概念、产生背景、特点、构件及其体系结构和发展前景,探讨实现IEEE802.11gWLAN所需的关键技术及其双频多模应用方式,同时分析IEEE802.11g标准的网络性能。     

黄河口河道演变规律探讨

通过分析黄河口河道在纵剖面、横断面、河型等方面的演变过程,总结归纳出黄河口河道的演变规律。指出:黄河口泥沙在潮汐涨落等因素影响下,河口河道纵剖面逐渐形成台阶状,与此同时,河口滩地横比降逐渐发展为倒比降;河口河道中段由顺直型河道逐渐转为弯曲型河道,而下段仍为相对顺直、游荡型河道。当河口河道中段比降减小到一定程度后,此河段开始漫滩、卡冰、出汊。河口台阶的形成揭示了黄河口流路由单股河道逐渐转为出汊的过程,即黄河口流路由“青壮期”逐渐转为“衰亡期”的过程。延长黄河口流路使用年限的途径是:①尽量减少黄河下游输向黄河口的泥沙量;②采取河口挖沙或人工改汊措施,地点宜选在河口河道的中下段。     

Characterization and optimization of copper chemical mechanical planarization

The feature scale planarization of the copper chemical mechanical planarization (CMP) process has been characterized for two copper processes using Hitachi 430-TU/Hitachi T605 and Cabot 5001/Arch Cu10K consumables. The first process is an example of an abrasive-free polish with a high-selectivity barrier slurry, while the second is an example of a conventional abrasive slurry with a low-selectivity barrier slurry. Copper fill planarization has been characterized for structures with conformal deposition as well as with bumps resulting from bottom-up fill. Dishing and erosion were characterized for several structures after clearing. The abrasive-free polish resulted in low sensitivity to overpolish and low saturation levels for dishing and erosion. Consequently, this demonstrated superior performance when compared to the International Technology Roadmap for Semiconductors (ITRS) 2000 roadmap targets for planarization. While the conventional slurry could achieve the 0.13-μm technology node requirements, the abrasive-free polish met the planarization requirements beyond the 0.10-μm technology node.     

中扬子及邻区层序地层与原型盆地演化

中扬子及邻区原型盆地可划分为 9个大层序,其中,1～6大层序由中、古生代海相地层组成;第 7大层序为早、中侏罗纪的陆相沉积;第 8大层序为晚侏罗世的前渊沉积;第 9层序为晚白垩世至第三纪的伸展盆地。震旦纪,中部地区为台地相环境,向南为浅海陆棚环境,向北以陆表海为主;寒武纪至早奥陶世为典型的大陆边缘盆地;中、晚奥陶世至志留纪为裂谷盆地发展阶段;泥盆纪至石炭纪该区发生广泛海侵,与华南海域和太平洋海域多处相连;二叠纪至早、中三叠世为原型盆地的重要转型时期,随着分隔秦岭微板块与扬子板块的勉略古洋盆向东打开,扬子北缘由前期的区域性隆起转变为向北加深的大陆边缘盆地;晚三叠世经历了两次幕式旋回,巴东组沉积时期盆地沉降缓慢,九里岗组沉积时期则较快;早、中侏罗世原型盆地早幕 (早侏罗世)沉积缓慢,晚幕 (中侏罗世)快速沉降,以水下沉积作用为主;晚侏罗世可划分为两大构造演化阶段,早期构造活动相对平静,晚期强烈;晚白垩世至老第三纪,盆地范围缩小,以湖泊、河流体系为主。由此,中扬子及邻区在地质历史时期经历了 4种不同性质的原型盆地,具有幕式充填特征。     

韩江三角洲海岸变迁遥感调查研究

利用1:10万TM影像，对广东东部韩江三角洲地区的海岸变迁及河道演变进行了调查研究。划分了不同时期的海岸界线和古河道遗迹，提出韩江三角洲的形成是河流动力和海洋动力共同作用的结果，对研究历史海平面变化及环境演变具重要意义。