新钢基于多元数据采集的电弧炉炼钢过程能量监控系统

电弧炉炼钢过程中能量多元且复杂,采用单一的数据采集方式不能满足对电弧炉炼钢过程各工序能量构成分析要求。通过多元数据采集方式,准确采集电弧炉炼钢过程各工序实际生产数据,并使用Visual Studio 2013、Microsoft SQL Server 2012数据库等软件建立电弧炉炼钢过程能量监控系统。该系统通过实时动态采集到的电弧炉炼钢过程各项冶炼数据,量化电弧炉炼钢过程各工序能量,实现电弧炉炼钢过程能量监控;对电弧炉炼钢过程各工序能量消耗、能量流动、能量利用等方面进行分析,为电弧炉生产过程能量高效利用提供理论依据。     

粉末床增材制造中粉末分层与熔融行为的研究进展

基于粉末床的增材制造技术在成形复杂形状、性能优异零件上具有显著优势,近年来成为发展最快、应用最广的增材制造技术之一。该过程涉及微观组织演化、介观粉末流动/熔融、宏观应力变形等多个尺度上的复杂行为,对这些行为的深入理解是稳定地成形制造出性能优异零件的关键。本文主要从介观尺度上研究了制造过程中粉末性质和加工条件对粉末流动分层,粉末层质量和加工参数的影响,对粉末熔融行为的研究现状进行了综述。     

经不同熔体处理的易拉罐用铝材的热压缩变形组织

采用动态热/力模拟实验技术对经不同熔体处理的易拉罐用铝材进行高温压缩变形实验,并用光学显微镜、透射电镜分析探讨其热变形组织特征。结果表明:冶金质量影响易拉罐用铝材的动态再结晶组织特征,在未处理或常规熔体处理状态下存在枝晶网胞结构,晶粒组织不均匀;高效熔体处理使易拉罐用铝材在较低的温度下即可通过亚晶合并方式发生动态再结晶,并在变形温度573~673 K、应变速率0.1~1.0 s-1、变形量约0.7的较宽的热变形工艺条件下可获得细小且分布较均匀的再结晶晶粒组织。     

新型镍基粉末高温合金动态再结晶的数学模型

采用Gleeble 15 0 0热模拟试验机对新型镍基粉末高温合金在 10 70℃～ 1170℃ ,应变速率为 5× 10 - 4s- 1～2× 10 - 1s- 1的条件下进行了轴向压缩试验。通过加工硬化率和应变的关系曲线确定稳态应变εs,并绘制了该合金的动态再结晶图。结果表明 ,Zener Hollomon参数变化对动态再结晶的临界应变量影响较小 ,对稳态应变量影响较大 ,并建立了该合金的动态再结晶动力学模型和晶粒尺寸模型     

Flow stress and softening behavior of wrought magnesium alloy AZ31B at elevated temperature

1　INTRODUCTIONThewroughtmagnesiumalloyshaveexcellentspecificstrengthandstiffness ,machinability ,dampcapacity ,dimensionalstability ,lowmeltingcostsandare ,hence ,veryattractiveinsuchapplicationsasau tomobile ,aviation ,electronicandcommunicationin dustry[16 ] .Investigationsontheflowstressandsofteningbehaviorofmagnesiumalloysathigherformingtem peratureandstrainratehavebeenanimportantsub jectinwroughtmagnesiumalloysforming[710 ] .InthispapertheflowstressandsofteningbehaviorofAZ31Bdeform…     

线激光--机器视觉测量系统中的多传感器融合技术研究

针对逆向工程中直接从线激光扫描的数据云图中提取物体边界不仅繁琐而且精度也不好保证，为此提出建立线激光—机器视觉测量系统，先利用三日视觉获得物体初始边界，然后利用曲线延拓的方法并考虑影响延拓误差的因素，从而在满足一定精度要求的前提下实现不同传感器信息的融合。     

纯铜动态再结晶的Monte Carlo法模拟

本文建立了一种基于能量判据的确定动态再结晶各个阶段临界应变的方法，并基于此种方法Monte Carlo(MC)法进行了纯铜动态再结晶的二维模拟，定量计算了变形引起的存储能与变形之间的关系，计算出了发生动态再结晶的临界应变。模拟结果表明，采用MC法可以揭示动态再结晶的形核生长过程与应变历史之间的关系。结合本文所建立的基于能量判据的确定动态再结晶各个阶段临界应变的方法，可以预测开始发生动态再结晶的临界变形条件。     

Cold gas dynamic spraying of aluminum: The role of substrate characteristics in deposit formation

Aluminum powder of 99.7 wt.% purity and in the nominal particle size range of −75+15 μm has been sprayed onto a range of substrates by cold gas dynamic spraying (cold spraying) with helium, at room temperature, as the accelerating gas. The substrates examined include metals with a range of hardness, polymers, and ceramics. The substrate surfaces had low roughness (R _a < 0.1 μm) before deposition of aluminum in an attempt to separate effects of mechanical bonding from other forms of bonding, such as chemical or metallurgical bonding. The cross-sectional area of a single track of aluminum sprayed onto the substrate was taken as a measure of the ease of initiation of deposition, assuming that once a coating had begun to deposit onto a substrate, its growth would occur at a constant rate regardless of substrate type. It has been shown that initiation of deposition depends critically upon substrate type. For metals where initiation was not easy, small aluminum particles were deposited preferentially to large ones (due to their higher impact velocities); these may have acted as an interlayer to promote further building of the coating. A number of phenomena have been observed following spraying onto various substrates, such as substrate melting, substrate and particle deformation, and evidence for the formation of a metal-jet (akin to that seen in explosive welding). Such phenomena have been related to the processes occurring during impact of the particles on the substrate. Generally, initiation of aluminum deposition was poor for nonmetallic materials (where no metallic bonding between the particle and substrate was possible) and for very soft metals (in the case of tin, melting of the substrate was observed). Metallic substrates harder than the aluminum particles generally promoted deposition, although deposition onto aluminum alloy was difficult due to the presence of a tenacious oxide layer. Initiation was seen to be rapid on hard metallic substrates, even when deformation of the substrate was not visible. The original version of this article was published as part of the ASM Proceedings, Thermal Spray 2003: Advancing the Sciences and Applying the Technology, International Thermal Spray Conference (Orlando, FL), May 5–8, 2003, Basil R. Marple and Christian Moreau, Ed., ASM International, 2003.     

Influence of initial textures on dynamic recrystallization and textures in AZ31 magnesium alloys

1　INTRODUCTIONMagnesiumisthelightestmetallicstructurema terialwithhighspecificstrengthandthereforeiswidelyusedinautomotive ,electronicsandaerospaceindustries[1,2 ] .However ,magnesiumoftenshowsinsufficientplasticityatroomtemperatureduetoitsHCPstructurewithlessindependentsystemsofbasalslip .Toenhanceformabilityofmagnesium ,ahigherdeformingtemperatureisusuallyusedwithtwopur poses .Thefirstistoactivatenewslipsystemsbesidesbasalslip ,sothatmorethanfiveindependentslipsystemscanbeprovided ,be…     

CAD系统中属性信息的自动提取研究

属性是AutoCAD中建立非图形信息的主要方法之一。通过在图形文件中用属性添加面向设计或加工过程的信息，可以使图形文件获得完整的产品数据，满足CAD／CAPP／CAM集成的要求。介绍了属性建立的方法，并通过编制属性提取样板文件或编写应用程序从图形文件中提取属性。