膜片式流量调节阀

介绍了用于油田开采工艺的膜片式流量调节阀的结构及其特点,分析了调节阀出口压力、进口压力对其流量的影响。受力分析和现场使用表明:该阀流量恒定精度(即恒流偏差)取决于膜片有效面积S与阀心下端有效面积S′之比,此值为12,其恒流比偏差为0·03,说明该阀的流量恒定精度高;该阀不易被杂质卡死,稀油中直径1mm的砂粒能顺利通过,而不影响阀的功能;膜片式流量调节阀是没有高加工精度要求的部件,普通车床即可生产,因此造价较低。     

Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout

Tubular members are commonly used as an energy absorber in engineering structures and many such members have a cutout. In this study, the crushing behaviors of tubes with a cutout are characterized and the effects of cutout on the energy absorption capabilities of these tubes are quantified. Systematic parametric studies were carried out to study the effect of material properties, including yield and ultimate strength of material, strain rate effect, location of cutout, tube length and impact speed on the crushing behaviors and energy absorption capacity of aluminum and steel tubes. First, a numerical model was constructed with a commercial explicit finite element code. It will be first proven that the numerical simulation can produce sufficiently accurate results in an economic manner. Subsequently, the crushing behavior of aluminum and steel tubes with a cutout was experimentally characterized and their energy absorption capacity was evaluated in terms of mean crushing force, peak crushing force and specific energy absorption (SEA). Tubes of various lengths with a cutout located at different locations, subject to both quasi-static and dynamic impact loadings were considered. For steel tubes, the numerical simulation investigated the influence of the strain rate effect and variation in strain hardening ratio of the material. Empirical equations describing the mean and peak crushing forces of aluminum and steel tubes with a cutout were developed using linear and nonlinear regression methods applied to the results obtained from the numerical and experimental studies.     

Turbo码中快速交织器的设计

分析了交织器在Ｔｕｒｂｏ码中的重要作用，以及目前交织器存在的缺陷，介绍了一种快速交织器的设计方法。该交织器易于实现，具有交织时延低的突出优点。计算机仿真结果表明，该快速交织器可以获得优异的性能。     

Strength of Metals at High Strain Rates

Results of metal testing in impact tension–compression and indentation are analyzed. As the analysis of these data demonstrates, the strength of metals increases greatly with strain rates and at moderate indentation rates. At high indentation rates, a decrease in the specific energy (per unit volume of a displaced material) necessary for the formation of a conical cavity was observed. The account of the effects of viscosity, temperature increase upon plastic deformation and its localization can be used to explain the above phenomena.     

太平油田馆陶组下段辫状河储层地震反射假象分析

太平油田位于义和庄凸起北坡东部，主要含油层为馆陶组下段发育的辫状河储层。河流相频繁的决口、改道及辫状河流相砂体发育位置和砂体空间配置关系的特殊性，使得其在地震剖面上产生了反射假象，从而使对辫状河储层层位的追踪及砂体的描述变得异常困难。从馆陶组下段辫状河储层的发育特征及地震观测因素出发，阐述了馆陶组下段辫状河地震反射假象产生的原因。提出了利用地震资料分频解释技术和设计多井约束反演可较为准确地识别辫状河储层的反射假象。     

基于模糊事件概率理论的水质风险率计算方法

针对水环境系统的随机不确定性和模糊不确定性，分析了影响水环境中水质风险的不完善性和模糊性因素，将水环境中水质风险作为一个模糊事件，利用模糊事件概率理论，提出了水环境水质超标的模糊随机风险率计算模型。通过引入模糊事件信息熵来评价隶属函数特征值取值的可靠程度，定量描述了隶属函数特征值与风险率的关系，进而计算出风险率。实例计算结果证明了方法的有效性。     

现役大坝泄洪能力风险率的MC分析

在水工水力学模型研究成果基础上,采用MC法对现役大坝泄洪能力风险率做进一步探讨,研究表明:(1)水力的不确定性对大坝防洪安全确实存在影响,但风险值较小;(2)国内绝大多数大中型现役坝的水力风险几近为0,设计偏于保守.由此可见,确定基于风险分析的大坝防洪安全标准和设计洪水标准,并据此来确定大坝坝顶高程,是非常必要的.     

Determination of instantaneous corrosion rates and runoff rates of copper from naturally patinated copper during continuous rain events

Instantaneous corrosion rates of naturally patinated copper of varying age (16 months, 138 and 145 years) have been determined during continuous rain events in the laboratory with electrochemical impedance spectroscopy using a two-electrode cell. The two-electrode cell was found to yield the same information in bulk rainwater as a conventional three-electrode cell.Relatively constant corrosion rates, between 0.2 and 0.6 μm/y, were determined for samples having a two-layer structure with an inner brownish layer of cuprous oxide and an outer greenish layer of basic copper salts (138, 145 years). Samples with cuprous oxide as the dominating phase of the patina (16 months) showed higher and somewhat increasing corrosion rates during a rain event (from 0.6 to 1.2 μm/y). During a continuous rain event, corrosion rates were found to be approximately 10 (brownish patina) and 25 times (greenish patina) lower than corresponding instantaneous runoff rates. The first flush phenomena of the runoff process, with an increased concentration during first flush and a relatively constant concentration during steady state, was indirectly seen as an increase in solution conductivity during the first rain volume followed by relative constant value. The contribution of the concentration in the first flush to the total annual runoff rate was significant for panels having a greenish layer (138, 145 years) whereas it was negligible for panels having a brownish layer (16 months).     

栏栅式山溪取水工程取水特性的试验研究

通过水工模型试验，对栏栅式山溪取水工程的取水特性进行了研究，探讨了在有足够大的集水廊道的前提下，该取水工程的潜在取水能力。结果表明，在影响栏栅取水量的诸因素中，栅条长度、栅隙和栏栅的设置角度对取水量的影响程度不同；其取水量主要由栏栅的设置角度决定，而栅条长度和栅隙对取水量的影响程度较小；栏栅的设置角度小于50°时，栏栅有较大的引水比，栏栅的设置角度大于50°后，栏栅的引水比大幅度下降。     

化工离心泵的可靠性分析

对石油化工设备安全性和维修技术的研究,需要设备运行故障率等可靠性数据。探讨了如何应用传统可靠性理论知识,并结合国内外相关标准规范和运行数据的统计分析来确定离心泵的可靠性数据的方法。