Estimation of Width and Depth of the Wetted Soil Volume Under a Surface Emitter,Considering Root Water-Uptake and Evaporation

A cylindrical flow model that describes local infiltration from a surface point source, by incorporating evaporation and water extraction by roots, was used to obtain numerical results that were the base for the development and testing of an empirical method for determining the surface and vertical components of the wetting front. The implementation of the mathematical model took place against two of the twelve USDA soil classes, using three water application rates for each one. The empirical methodology consisted of two simple, time dependent empirical relationships: a power law for the stage of the infiltration, which was applied in both directions and a polynomial for the stage after the end of the irrigation, applied only for the vertical component, to account for percolation losses. The statistical criteria used for the evaluation of the method showed good agreement between the numerical results and the values calculated by the empirical relationships. Based on the limited availability of necessary experimental data for detailed analysis of multidimensional transient infiltration, the introduction of such an empirical model, as a design tool for trickle irrigation systems, may contribute to the selection of the optimum application rate and lateral spacing.     

基于视觉效果的雷达目标动态回波序列特征提取方法

特征提取在雷达目标识别中具有重要地位,提取有效、可靠的目标特征,是建立目标识别系统的基础和关键。在常规低分辨雷达目标识别系统中,难以根据电磁散射理论进行有效建模。本文在观察和分析大量实测数据的基础上,根据雷达操作员进行目标判性的思维过程和描述方法,以雷达目标动态回波序列的视觉效果为切入点,建立了一整套雷达目标特征提取方法。在多个雷达目标识别项目中的实际应用,证明了该方法的有效性、稳健性和可推广性。     

潜油螺杆泵采油系统设计与应用技术分析

潜油螺杆泵采油技术在某些方面具有其他人工举升技术不可比拟的优点，特别适合于我国渤海湾一带粘油区、海上平台的采油作业，但这项技术在我国实际开发应用的时间还比较短，人们对这项技术的了解还不够深入，很多单项技术还有待于更多的人去关注和研究.介绍了潜油螺杆泵采油系统的结构，总结了该项采油技术与其他常用采油技术相比较的特点，系统地阐述了国内外的发展状况，分析了以往投入生产试运行时系统失效的原因并提出了相应的解决办法，最后探讨了系统设计技术的发展趋势.     

连续式超临界流体萃取进卸料装置

概括了超临界流体萃取技术和包括连续式操作在内的超临界流体萃取装置的研究现状 ,提出了一种通过球形进、卸料器完成固相物料超临界流体萃取连续化进卸料的装置 ,介绍了该装置的结构和工作原理 ,给出装置中各主要部件的计算方法。     

大港油田关家堡地区不同含油层系气测解释方法探讨

大港油田关家堡地区油气藏特征复杂，不同含油层系油气显示特征不同，气测录井解释符合率相对较低。针对这一情况，通过分析关家堡地区明化镇组、馆陶组和沙河街组的地质和气测显示特征，结合试油结论，提出不同含油层系相应的气测录井解释方法——TR与Wh（湿度比）气测解释法和三角形图板法，归纳总结了全烃及组分在不同层系的变化规律。应用实例表明，效果较好，对于复杂油气藏多层系油气层的解释评价具有一定的借鉴作用。     

PDC钻头对录井的影响及应对措施

钻井技术水平的不断提高和PDC钻头的广泛使用给现场录井作业带来了新问题。与传统的三牙轮钻头相比,PDC钻头突出的特点是产生的岩屑稀少、细小甚至失真,给地质录井的岩屑采集、鉴定、识别以及油气层级别的判定、解释、评价带来了一系列困难。为此,结合PDC钻头在新疆塔河、松辽盆地、鄂尔多斯等地油田的使用及录井经验,从PDC钻头条件下岩屑特征和岩性特征的分析入手,阐述使用PDC钻头对气测录井、荧光录井的影响,总结了在PDC钻头条件下搞好录井作业的应对措施,并列举了提高录井技术水平的可行途径。     

An efficient clustering scheme using support vector methods

Support vector clustering involves three steps—solving an optimization problem, identification of clusters and tuning of hyper-parameters. In this paper, we introduce a pre-processing step that eliminates data points from the training data that are not crucial for clustering. Pre-processing is efficiently implemented using the R*-tree data structure. Experiments on real-world and synthetic datasets show that pre-processing drastically decreases the run-time of the clustering algorithm. Also, in many cases reduction in the number of support vectors is achieved. Further, we suggest an improvement for the step of identification of clusters.     

暖通空调工程设计常见问题

通过对施工图审查工作进行总结，指出了暖通空调和防火防排烟设计中存在的问题及防火规范本身的一些不足。     

New Environment-Friendly Approach for Bastnasite Metallurgic Treatment (I): Extraction of Tetravalent Cerium from Sulphuric Acid Medium with Di(2-ethylhexyl) Phosphoric Acid

Bastnasiteisamainsourceofrareearthproducts inwhichCeO2/REOisabout50%.Atpresent,a cidity leachingcombinedwithalkali conversion method[1]iscommonlyusedinthebastnasitetreat ment.Thismethodisunfriendlytotheenvironment becausetheradioactiveelementofthoriuman…     

Analysis of trace mercury in water by solid phase extraction using dithizone modified nanometer titanium dioxide and cold vapor atomic absorption spectrometry

A new method for analysis of trace mercury in water samples was developed, based on the combination of preconcentration/separation using dithizone-modified nanometer titanium dioxide (TiO2) as a solid phase extractant and determination by cold vapor atomic adsorption spectrometry (CVAAS). Dithizone was dissolved with alcohol and loaded on the surface of nano-sized TiO2 powders by stirring. The static adsorption behavior of Hg2 on the dithizone-modified nanoparticles was investigated in detail. It was found that excellent adsorption ratio for Hg2 could be obtained in the pH range of 7-8 with an oscillation time of 15 min, and a 5 mL of 3.5 mol·L-1 HCl solution could quantitatively elute Hg2 from nanometer TiO2 powder. Common coexisting ions caused no obvious influence on the determination of mercury. The mechanisms for the adsorption and desorption were discussed. The detection limit (3σ) for Hg2 was calculated to be 5 ng·L-1. The proposed method was applied to the determination of Hg2 in a mineral water sample and a Zhujiang River water sample. By the standard addition method, the average recoveries were found to be 94.4%-108.3% with RSD (n = 5) of 2.9%-3.5%.