制造业中、高级职业技术教育刍议

论述了制造业中、高级岗位职业技术教育的意义、现状、存在问题及其人才市场要求，探讨了办好制造业职业技术教育的几个关键问题。     

Optimizing the Vacuum Heat-Treatment of Hot-Work Tool Steels by Linear Elastic Fracture Mechanics

Linear elastic fracture mechanics was used to optimize the vacuum heat-treatment procedures for conventional hot-work AISI H11 tool steel. The fracture toughness was determined with non-standard, circumferentially notched and fatigue-precracked tensile-test specimens. The fracture-testing method is sensitive to changes caused by variations in the microstructure resulting from the austenitizing and tempering temperatures as well as the homogeneity of the material itself. The combined tempering diagram- Rockwell-C hardness, Fracture toughness K_Ic, Tempering temperature was used for the choice of the vacuum heat-treatment parameters necessary to obtain the best properties for a given application with respect to the investigated steel.     

我国低浓度磷肥的发展策略和过磷酸钙生产的技改方向

从我国磷矿资源以中低品位磷矿居多,低浓度磷肥本身含有作物所需中微量元素,低浓度磷肥制造成本低及我国农民长期的使用习惯,论述低浓度磷肥在我国存在的必要性。过磷酸钙企业目前存在规模小、分散、生产技术落后、污染严重、废弃物利用率低等问题,提出过磷酸钙生产的技改方向,如无熟化造粒技术,采用浓酸矿浆法并同时采用集散微机自控技术,主要设备实行定型化、系列化等,以增强企业的竞争力。     

纤粒复合型油井水泥石增韧剂的性能及机理研究

针对国内油田油气井因后续施工(射孔、压裂、酸化等)造成水泥环脆裂的问题,根据断裂力学原理和复合材料理论设计配方,选用GX(1.0%的特种无机富硅纤维 2.5%的有机弹性颗粒)作为油井水泥石增韧材料;并对掺有GX的油井水泥浆的工程性能、物理性能、与其他外加剂的配伍性以及水泥石的微观结构进行考察,结合性能评价试验,分析了GX在水泥石中的增韧作用机理。结果表明,GX可以显著提高油井水泥石的韧性和弹性,并且与其他外加剂配伍性良好。     

应用地应力模拟技术研究断块区剩余油分布

应力场数值模拟不仅能够重塑出不同阶段地应力场，而且还可以定量一半定量地预测破裂的发生、裂缝的方向和密度，进一步探讨时间和空间上油气运移的规律，为油田勘探、开发提供必要的依据。本文以大庆萨北开发区北二西断层区为研究对象，通过应力场数值模拟研究了流体运移势场与剩余油分布的关系、流体运移与构造应力的关系、裂缝形成与剩余油分布的关系，确定了剩余油分布的有利区域，为油田注采系统的设计、部署和油田开发及措施调整提供了依据。     

Simulation of cup-cone fracture using the cohesive model

The cohesive model is used for the prediction of the crack path during stable crack extension in ductile materials. The problem of crack-path deviation is investigated by means of simulation of crack propagation in a round tensile bar. The respective phenomenon is known as cup-cone fracture. It is shown that the model is able to predict the failure mechanism, which consists of normal fracture in the center and combined normal/shear fracture in the so-called “shear lips” at the specimen’s rim. The damage evolution and crack path predicted by the model are presented. The effect of the normal and shear failure parameters on the crack-deflection point and several aspects of the finite element mesh are discussed.     

Brittle detachment of a stiffener bonded to an elastic plate

The diffusion of contact stresses between an elastic bar, bonded to an elastic half-plane and loaded longitudinally, requires the integration of a singular integral equation. The solution of this equation is not available in closed form, but only by a series expansion of the contact tangential force mutually transmitted between the stiffener and the plate. Since forty years it has been realized that the expansion of the solution in terms of Chebyshev polynomials is its most convenient method of representation. The procedure can also be extended to treat the brittle detachments of the tips of the stiffener when, according to Griffith's criterion of fracture, a balance can be virtually established between the increase of strain energy due to a propagation of cracks and the surface energy created.     

Thermomechanical fatigue—damage mechanisms and mechanism-based life prediction methods

An existing extensive database on the isothermal and thermomechanical fatigue behaviour of high-temperature titanium alloy EVII 834 and dispersoid-strengthened aluminum alloy X8019 in SiC particle-reinforced as well as unreinv conditions was used to evaluate both the adaptability of fracture mechanics approaches to TMF and the resulting predictive capabilities of determining material life by crack propagation consideration. Selection of the correct microstructural concepts was emphasised and these concepts were, then adjusted by using data from independent experiments in order to avoid any sort of fitting. It is shown that the cyclic /-integral (δJ_eff concept) is suitable to predict the cyclic lifetime for conditions where the total crack propagation rate is approximately identical to pure fatigue crack growth velocity. In the case that crack propagation is strongly affected by creep, the creep-fatigue damage parameter δ_CF introduced by Riedel can be successfully applied. If environmental effects are very pronounced, the accelerating influence of corrosion on fatigue crack propagation can no longer implicitly be taken into account in the fatigue crack growth law. Instead, a linear combination of the crack growth rate contributions from plain fatigue (determined in vacuum) and from environmental attack is assumed and found to yield a satisfactory prediction, if the relevant corrosion process is taken into account.     

低碳钢热变形过程中铁素体的织构形成规律

利用背散射电子衍射取向成像技术定量分析了热模拟单向压缩条件下Q235碳素钢热变形时铁素体的织构形成规律。结果表明,在710℃纯铁素体热压缩过程中,形成〈100〉和〈111〉方向的线织构。〈111〉方向织构增强的速度较快,到应变为1.0时达最大值,然后随应变的加大而减弱;〈100〉方向织构在形变量较小时增强的速度较慢,在大应变时增强的速度很快。大应变时虽导致一定程度的动态再结晶,使铁素体晶粒细化,但组织不均匀,织构过强,造成强烈的各向异性。在奥氏体与铁素体两相区变形时,先共析铁素体因形变同样产生强烈的织构。随着形变温度的提高和先共析铁素体的减少,织构减弱。     

气藏水平井非稳态产能预测新方法研究

针对高产气藏储层特征,建立起气藏水平井非稳态产能预测模型,对高产气藏的产能进行分析和预测.实例分析表明,通过该模型形成的基于气藏与井筒耦合作用的非稳态产能预测新方法,对于单井产能预测具有优越性、长远性和实用性.该方法可直接利用不稳定压力测试成果进行预测,还可通过生产动态资料拟合来确定地层参数和预测,也可用来研究不同工作制度、完井方式,以及增产措施改善情况下的产能变化,为衰竭式开采的气藏工程研究提供了先进的手段.