Sensitivity analysis of the scattering parameters of microwave filters using the adjoint network method

A novel approach is presented to calculate the sensitivities of the scattering parameters of microwave filters obtained with the full‐wave mode‐matching (MM) technique. Using only the MM simulation of the original network, the sensitivities of the scattering parameters with respect to all designable parameters are obtained. The adjoint network method (ANM) is applied to the generalized scattering matrices of the different filter components. This guarantees good accuracy of the calculated sensitivities. The implementation details are discussed for N‐resonator ridge waveguide filters. Excellent agreement is obtained between the sensitivities calculated using ANM and those obtained using the expensive central differences. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

Symmetric BEM formulations for 2-D steady-state and transit potential problems

This paper presents a new concept for symmetric boundary element method (SBEM) applicable to 2-D steady-state and transit potential problems. Two kinds of SBEM formulations are derived. Symmetry is obtained simply through matrix manipulation, and no hypersingularity appears. Therefore, SBEM is much easier than the traditional symmetric Galerkin BEM. Compared with the traditional asymmetric BEM, the present SBEM can reduce the computational cost for time domain problems only. However, when applied to BEM/FEM coupling procedure, SBEM can reduce the computational cost for both steady-state and time domain problems. Three numerical examples are included to illustrate the effectiveness and accuracy of the present formulations.     

转炉出钢口套整体袖砖工艺技术开发

介绍了天津天铁冶金集团有限公司炼钢厂转炉出钢口袖砖工艺的开发过程，主要工艺参数的制定，实践证明，该工艺的应用取得了良好的使用效果。     

Bayesian and Dempster-Shafer fusion

The Kalman Filter is traditionally viewed as a prediction-correction filtering algorithm. In this work we show that it can be viewed as a Bayesian fusion algorithm and derive it using Bayesian arguments. We begin with an outline of Bayes theory, using it to discuss well-known quantities such as priors, likelihood and posteriors, and we provide the basic Bayesian fusion equation. We derive the Kalman Filter from this equation using a novel method to evaluate the Chapman-Kolmogorov prediction integral. We then use the theory to fuse data from multiple sensors. Vying with this approach is the Dempster-Shafer theory, which deals with measures of “belief”, and is based on the nonclassical idea of “mass” as opposed to probability. Although these two measures look very similar, there are some differences. We point them out through outlining the ideas of the Dempster-Shafer theory and presenting the basic Dempster-Shafer fusion equation. Finally we compare the two methods, and discuss the relative merits and demerits using an illustrative example.     

燕山石化巨型塔器整体液压连续平移技术

北京燕山石化两巨型塔器在国内首次使用整体液压连续平移技术安装成功。该项技术可缩短工期,降低费用,提高安装的平稳性。     

On integral equation approaches to the mechanics of fibre-crack interaction

The paper examines the problem of a penny-shaped crack which is formed by the development of a crack in both the fibre and the matrix of a composite consisting of an isolated elastic fibre located in an elastic matrix of infinite extent. The composite region is subjected to a uniform strain field in the direction of the fibre. The paper presents two integral-equation based approaches for the analysis of the problem. The first approach considers the formulation of the complete integral equations governing the associated elasticity problem for a two material region. The second approach considers the boundary integral equation formulation of the problem. Both methods entail the numerical solution of the governing integral equations. The solutions to these integral equations are used to evaluate the stress intensity factor at the boundary of the penny-shaped crack.     

Significance of fluid regime in biological filtration

A dispersed flow model previously developed to study substrate utilization in unsaturated media was experimentally verified and its practical application was considered. For this purpose, measurements were made using tap water and a synthetic feed solution. The importance of the change in fluid regime as regards to the simultaneous transport and reaction within biological filters were demonstrated. The effect of drop formation and the breakage of liquid jets inside the filters on substrate utilization was also shown.     

On the Realization of Current－Mode Continuous－Time Operational Transconductance Capacitance Filter

ＯｎｔｈｅＲｅａｌｉｚａｔｉｏｎｏｆＣｕｒｒｅｎｔ－ＭｏｄｅＣｏｎｔｉｎｕｏｕｓＴｉｍｅＯｐｅｒａｔｉｏｎａｌＴｒａｎｓｃｏｎｄｕｃｔａｎｃｅＣａｐａｃｉｔａｎｃｅＦｉｌｔｅｒ￥ＧｕｏＪｉｎｇｂｏａｎｄＨａｎＱｉｎｇｑｕａｎ（ＣｈａｎｇｃｈｕｎＰｏｓ...     

A BOUNDARY INTEGRAL EQUATION AND ITS NUMERICAL SOLUTION OF POTENTIAL FLOW AROUND SURFACE-IRREGULA-RITIES

In this paper,using complex functional theory,the authors turn the potentialflow around the surface irregularities in a pressure conduit and semi-infinite platforms intoDirichlet problem.Based on Schwarz formula and by the application of Plemelj's formula,theauthors change the problem into the integration of a Cauchy boundary integral equation in theflow plane through the substitution of variables.Using numerical integration,the authors obtainthe velocity distribution and pressure coefficient along surface irregularities and platforms.Thephysical concept of this method is clear,the convergent speed is rapid and the computative effi-ciency is high.The calculated values agree well with the measured results.It is an effective andsimple method in solving potential flow.     

二维金属凹槽填充各向异性介质时散射的边界元方法:TE情形

由各向异性介质无界空间Green函数和Green恒等式出发，推导了TE波入射时二维任意截面金属凹槽填充各向异性介质时所满足的边界积分方程，并用边界元法和广义网络原理计算了金属凹槽填充各向异性介质时的散射。用文中方法退化计算了凹槽填充各向同性介质时的散射，计算结果与解析结果一致。并给出了凹槽填充各向异性介质时的散射算例。