光电系统对空目标探测距离评估方法研究

为估算光电系统的目标探测距离，研究了目标的红外辐射特性和在实验室内对系统灵敏度进行测试的方法。在系统设计阶段，可以利用系统设计参数估算光电系统目标探测距离；在系统样机研制完成后，可以利用系统灵敏度测试，对光电系统目标探测距离进行估算。经实际系统试飞试验表明目标探测距离评估方法是可行的。     

南宁市防洪堤江北西堤主要工程地质问题分析评价

该文通过对江北西堤工程地质条件及堤基土的物理力学性质的分析,对堤防的抗滑稳定、渗透及渗透稳定性、岸坡稳定性进行了评价,由此得出结论:所用的勘察手段、评价方法合理、恰当,取得了较好的工程效果,为类似工程提供借鉴并具指导意义。     

DCOP FOR SMART HOMES: A CASE STUDY

The aim of this article is to bring forth the issue of integrating the services provided by intelligent artifacts in Ambient Intelligence applications. Specifically, we propose a Distributed Constraint Optimization procedure for achieving a functional integration of intelligent artifacts in a smart home. To this end, we employ Adopt-N , a state-of-the-art algorithm for solving Distributed Constraint Optimization Problems (DCOP). This article attempts to state the smart home coordination problem in general terms, and provides the details of a DCOP-based approach by describing a case study taken from the RoboCare project. More specifically, we show how (1) DCOP is a convenient metaphor for casting smart home coordination problems, and (2) the specific features which distinguish Adopt-N from other algorithms for DCOP represent a strong asset in the smart home domain.     

�����������������������������ܿ��������о�

白马庙气田蓬莱镇气藏储层致密 ,孔隙结构复杂 ,非均质性强 ,单井产能低 ,研究储层特征和受控因素 ,加强储层改造方是气藏效益开发的出路。储层精细研究揭示 ,气井产能受沉积相和构造条件控制 ;高、中产井与大而厚、物性好的河口坝、河道砂坝沉积微相有关 ,纵向上具很强的层段性 ,主产层集中在Ⅳ～③、Ⅲ～③两套砂组 ,其钻探成功率分别达 82 %和 10 0 % ;平面上多分布于主体构造和东南鼻状突起 ,二者高、中产能井分别占 30 %和 70 %。在深入的地质研究和储层压裂评层选井的基础上 ,采用多层打开、分层压裂、多层合采的方法可提高气井产能 ,并形成了一套行之有效的压裂评层选井的综合配套技术。采用该技术优选出 19口井 ,已实施 5口井全获成功 ,气产量成倍或十几倍增加 ,其中白浅 4 5井气无阻流量高达 18× 10 4m3 /d ,白浅 38井投产 16 5d净增产值 10 0余万元     

用Tow-Thomas电路设计含有限非零传输零点有源滤波器的方法

Tow-Thomas电路是一种实现全极点滤波器的典型电路。本文给出了用Tow-Thoms电路设计含有限非零传输零点有源滤波器的方法，从而使Tow-Thomas电路可用于单片集成滤波器电路。而文中给出的公式可用于计算外接元件。设计实例表明了文中给出的计算公式的正确性。     

一种动态开关电容运算放大器共模负反馈电路

本文主要介绍了一种应用于Cascode结构运放中的开关电容共模负反馈电路，它具有稳定性好、对运放频率特性影响小、不消耗额外功率等优点。对电路运用Hspice进行了模拟，并给出了模拟结果。     

High-Tc dc-SQUID magnetometer and its application in eddy current non-destructive evaluation

We have fabricated and tested a high-T_c dc-SQUID magnetometer patterned on a YBCO thin film deposited on a SrTiO₃ bicrystal substrate. The measurement of noise spectrum at 77 K showed that the magnetometer has a white noise of 333 fT/Hz^1/2 without superconducting shield, corresponding to a flux sensitivity of 14.5 μΦ₀/Hz^1/2. We constructed a test system for eddy current non-destructive evaluation of conducting aluminum plates by using the magnetometer. Flaws over 10 mm below the surface can be clearly identified. By mapping the magnetic field distribution, we can locate the flaw position. The signals caused by flaw were expanded due to the use of double-D type driving coil with a wider central slit. The experimental results confirmed that this test system could operate in a magnetic unshielded environment.     

Time and cost securing in complex large-scale projects

Meeting time and cost objectives in complex projects involves specific problems and risks. An attempt is made to analyse the components of total cost increase of a project caused by time delay. An outline is given as to how these considerations can be used to estimate cost increases in investors' decision situations as well as to ascertain fair contractual penalties and claims for compensation and for the evaluation of justified project acceleration costs.     

Product Evaluation Knowledge Acquisition Based on Rough Sets

1 Introduction Acquiring knowledge is constantly encountered in the mechanical product evaluation process, such as during setting up evaluation index system and determining evaluation knowledge. The most useful expression form of knowledge is production rule whenever concerning the field knowledge or decision knowledge. How to effectively acquire and express the knowledge becomes the issue that the evaluation work must solve at first. One of an important application of the rough set theory is …     

Evaluating dynamic performance: The influence of salient Gestalt characteristics on performance ratings.

It is well recognized that performance changes over time. However, the effect of these changes on overall assessments of performance is largely unknown. In a laboratory experiment, we examined the influence of salient Gestalt characteristics of a dynamic performance profile on supervisory ratings. We manipulated performance trend (flat, linear-improving, linear-deteriorating, U-shaped, and ∩-shaped), performance variation (small, large), and performance mean (negative, zero, positive) within subjects and display format (graphic, tabular) between subjects. Participants received and evaluated information about the weekly performance of different employees over a simulated 26-week period. Results showed strong main effects on performance ratings of both performance mean and performance trend, as well as interactions with display format. Theoretical and practical implications of the results are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)