基于光敏自组装多层膜的液晶光控取向膜

采用layer-by-layer(LBL)的方法，将基板依次在具有光敏双键的季铵盐水溶液和聚乙烯基苯磺酸钠水溶液中浸泡，石英基板表面形成了自组装多层沉积膜。经线性偏振紫外光辐照后，LBL多层膜表现出明显的紫外吸收各向异性。将两片带有各向异性薄膜的基板做成平行液晶器件。在正交的偏光显微镜下观察，发现取得均一、稳定的取向效果。该种光控取向膜有望用作LCoS微显示的取向层。     

一种改进的图像域SAR目标散射中心特征提取方法

散射中心是SAR图像目标识别的重要特征。本文基于属性散射中心模型，在文献[6]的基础上，提出了一种改进的图像域SAR目标散射中心特征提取方法。在该方法中，通过引入参数规则化处理步骤，解决了属性散射中心特征提取方法的收敛问题，提高了属性散射中心特征参数估计的精度和效率；提出了一种能同时实现散射中心数目确定和结构判别的方法，实现了散射中心类型的可靠判别。仿真数据和MSTAR实测SAR图像数据的实验结果，验证了本文改进的图像域SAR目标散射中心特征提取方法的有效性。     

A p‐version,first order shear deformation,finite element for geometrically non‐linear vibration of curved beams

A p‐version, hierarchical finite element for curved, moderately thick, elastic and isotropic beams is introduced. The convergence properties of the element are analysed and some results are compared with results published elsewhere or calculated using a commercial finite element package. It is verified that, with the proposed element, shear locking does not affect the computation of the natural frequencies and that low dimensional, accurate models are obtainable. Geometrically non‐linear vibrations due to finite deformations, which occur for harmonic excitations with frequencies close to the first three natural frequencies of vibration, are investigated using Newmark's method. The influence of the thickness, longitudinal inertia and curvature radius on the dynamic behaviour of curved beams are studied. Copyright © 2004 John Wiley & Sons, Ltd.     

Application of piece‐wise linear weight functions for 2D 8‐node quadrilateral element in contact problems

The present study is a continuation of our previous work with the aim to reduce problems caused by standard higher order elements in contact problems. The difficulties can be attributed to the inherent property of the Galerkin method which gives uneven distributions of nodal forces resulting in oscillating contact pressures. The proposed remedy is use of piece‐wise linear weight functions. The methods to establish stiffness and/or mass matrix for 8‐node quadrilateral element in 2D are presented, i.e. the condensing and direct procedures. The energy and nodal displacement error norms are also checked to establish the convergence ratio. Interpretation of calculated contact pressures is discussed. Two new 2D 8‐node quadrilateral elements, QUAD8C and QUAD8D, are derived and tested in many examples, which show their good performance in contact problems. Copyright © 2004 John Wiley & Sons, Ltd.     

Updated semi‐discretization method for periodic delay‐differential equations with discrete delay

An updated version of the semi‐discretization method is presented for periodic systems with a single discrete time delay. The delayed term is approximated as a weighted sum of two neighbouring discrete delayed state values and the transition matrix over a single period is determined. Stability charts are constructed for the damped and delayed Mathieu equation for different time‐period/time‐delay ratios. The convergence of the method is investigated by examples. Stability charts are constructed for 1 and 2 degree of freedom milling models. The codes of the algorithm are also attached in the appendix. Copyright © 2004 John Wiley & Sons, Ltd.     

High-load, squeeze action linear bearings with beam deflection

The literature provides little information on high-speed, high-normal-load, plain linear bearings, although the case for two rigid surfaces in relative linear motion can readily be solved by assuming squeeze action resistance. A new genus of internal combustion engines based on the Stiller-Smith mechanism incorporates connecting rods constrained by linear bearings, with the central normal load on the rod restricted by an oil film. A general analysis takes into account the bending of the rod, when the distributed oil film pressure resists the distributed load on the elastic rod. Design charts result that yield the dimensionless velocity at which the rod sinks in the oil as a function of the dimensionless load and the bearing clearance, and predict the deflection of the beam. The rod clearance history simulations for the Stiller-Smith engine compare favourably with computations for the rigid beam, confirming the analysis technique.     

聚乙烯丙纶复合防水卷材的特点及其应用

介绍了聚乙烯丙纶复合防水卷材的产品结构特点和性能特点、防水系统结构特点和配套材料、应用拼接技术以及产品应用范围。     

特低渗油藏渗流特征及增产技术研究

从特低渗储层渗流机理研究出发，分析了其渗流规律——非达西渗流特征；根据储层中上覆岩石围压变化，通过室内试验表述了其对渗透率伤害。研究提出了改善渗流特征的注水条件、井网优化和压裂对策，可以有效提高这类油藏的开发效果。     

Fuzzy Multiobjective and Linear Programming Based Management Models for Optimal Land-Water-Crop System Planning

In this article, linear programming and fuzzy optimization models are developed for planning and management of available land-water-crop system of Mahanadi-Kathajodi delta in eastern India. The models are used to optimize the economic return, production and labour utilization, and to search the related cropping patterns and intensities with specified land, water, fertilizer and labour availability, and water use pattern constraints. Due to extreme backwardness of the study area, it has been decided to keep all the three objectives of the linear programming models at the same priority level to obtain the compromised solution in a fuzzy environment that incorporates the imprecision in fuzzy goals and fuzzy constraints. These non-structural models facilitate the conjunctive use of available surface water and groundwater resources. A comparative evaluation along with the benefit-cost ratios of the existing and proposed farming systems is also presented.