叶片式泵内气液两相泡状流的三维数值计算

为研究旋转叶片式泵中的气液两相流动规律及泵性能，本文根据气泡泡状流模型提出了一个两相流三维数值分析方法。该数值计算由两部分的计算迭代完成，第一部分是已知含气率分布的连续相(液相)流场的计算。液相流动方程的三维数值求解采用了流面坐标迭代法。第二部分是已知液相流场后的分散相(气泡)轨迹的计算。气泡运动方程中考虑了流场压力梯度差产生的力、气泡周围液体产生的阻力及由于液相质量产生的惯性力等影响气泡运动的因素。通过对气泡运动方程进行数值求解，可得到泵内的含气率分布。再将两部分的计算进行反复迭代，最终得到收敛解。本文将该三维两相流数值计算方法用于多级螺旋轴流式增压泵叶轮的计算、设计。计算结果表明：从叶轮回转面上看，气泡运动转轨并不明显地偏离液相流线。然而从叶轮子午面上看，几乎所有的气泡，不论其初始位置如何，它们最终都移向轮毂表面。该三维两相流数值计算以其简单实用的特点，有望成为工程中气液两相增压泵的一种有效设计工具。     

Development of a Sensor Fusion Strategy for Robotic Application Based on Geometric Optimization

Fusion of multi-sensor information is an important technology, which is growing exponentially due to its tremendous application potential in many areas. Effective fusion of data from sensors is very critical in increasing an intelligent system's capability to accomplish complex tasks. Appropriate fusion technologies are needed to be developed specially when a system requires redundant sensors to be used. More the redundancy in sensors, more is the computational complexity for controlling the system and more is its intelligence level. This research presents a strategy developed for multiple sensor fusion, based on geometric optimization. Each sensor's uncertainty has been modeled using classical Lagrangian optimization techniques. However, the uniqueness and effectiveness of the present technique lies on the fact that starting from the optimized value as initial estimate the accuracy of the sensory information has further been improved up to any pre defined bounded range, by developing two architectures – FFA (fission–fusion architecture) and FDD (fusion in differential domain). Sufficient evidences and analyses have been provided in the paper to show its effectiveness in various applications.     

Optimal Operation of Reservoir Systems using Simulated Annealing

A stochastic search technique, simulated annealing (SA), is used to optimize the operation of multiple reservoirs. Seminal application of annealing technique in general to multi-period, multiple-reservoir systems, along with problem representation and selection of different parameter values used in the annealing algorithm for specific cases is discussed. The search technique is improved with the help of heuristic rules, problem-specific information and concepts from the field of evolutionary algorithms. The technique is tested for application to a benchmark problem of four-reservoir system previously solved using a linear programming formulation and its ability to replicate the global optimum solution is examined. The technique is also applied to a system of four hydropower generating reservoirs in Manitoba, Canada, to derive optimal operating rules. A limited version of this problem is solved using a mixed integer nonlinear programming and results are compared with those obtained using SA. A better objective function value is obtained using simulated annealing than the value from a mixed integer non-linear programming model developed for the same problem. Results obtained from these applications suggest that simulated annealing can be used for obtaining near-optimal solutions for multi-period reservoir operation problems that are computationally intractable.     

施加复合电磁搅拌对A357合金微观组织的影响

在半固态加工技术中，电磁搅拌是最早应用于制备非枝晶浆料的方法之一，同时也是半固态触变压铸技术最早获得工业应用的重要技术基础之一。采用自行开发的电磁搅拌器，研究了多种不同电磁搅拌方式在不同工艺条件下，单独施加或复合施加对A357合金微观组织的影响。试验结果表明：单一施加旋转感应电磁搅拌时，浆料径向组织很不均匀；单一施加无芯感应电磁搅拌。当搅拌电流较小时，径向组织也不均匀，增大电流，浆料质量有明显改善；采用（旋转感应＋无芯感应）复合电磁场进行复合电磁搅拌时，可在电流较小时获得满意的浆料质量。     

GaAs／AlGaAs多量子阱红外探测器的光电流谱

测量了ＧａＡｓ／ＡｌＧａＡｓ多量子阱红外探测器在零偏压、小偏流和大偏压等条件下的光电流谱，并结合理论计算的光跃迁能量讨论了光电流谱的多峰结构和异常增强特性。     

多缝式烧嘴点火器在攀钢烧结生产中的应用

多缝式烧嘴点火器具有燃烧效率高，火焰长度易调，炉膛温度分布合理等优点，经工业试验证明，该点火器能满足攀钢烧结点火工艺要求，并有明显节能效果。     

Buckling analysis for delaminated composites using plate bending elements based on higher‐order zig‐zag theory

A finite element based on the efficient higher‐order zig‐zag theory with multiple delaminations is developed. The bending part of the formulation is constructed from the concept of DKQ element. Unlike conventional elements, a developed element has its reference in the bottom surface which simplifies zig‐zag terms on formulation. Exact patch solutions are developed on elements which have the bottom reference system. The present element passes proper bending patch tests in the arbitrary mesh configurations in isotropic materials. Zig‐zag formulation is adopted to model laminated plates with multiple delaminations. To assess the accuracy and efficiency of the present element based on higher‐order zig‐zag theory with multiple delaminations, the linear buckling problem of laminated plates with multiple delaminations has been analysed. The results have been compared with three‐dimensional elasticity solutions. The present element works as an efficient tool for analysing the behaviour of the laminated composites with multiple delaminations. Copyright © 2002 John Wiley & Sons, Ltd.     

毫米波谐波振荡器的Volterra级数分析法

本文基于Ｖｏｌｔｅｒｒａ级数法和非线性转移函数理论，提出了一种分析毫米波谐波振荡器的新方法，给出了描述其非线性特性的决定方程，通过求解一组非线性代数方程，便可计算出谐波振荡器的振荡频率和幅度。文中给出了具体分析实例，并与谐波平衡法等进行了比较，结果表明：这种方法具有理论严密、准确性高、适用范围广等特点，特别是利用一次决定方程的结果作为其它非线性数值分析方法的初始估值，则可大大地节约计算时间，并容易     

Transmit Diversity Schemes for WCDMA

Previous work on transmitter antenna diversity has shown that the use of multiple transmitter antennas at the base station results in improved performance due to increase of diversity (path diversity). This happens with no bandwidth cost, even when the signal quality along several paths is poor, but the receiver estimates the channel with accuracy. This paper evaluates the effects of channel estimation errors in the performance of the schemes designated as Space-Time Transmitter Diversity (STTD) and Selective Transmitter Diversity (STD). We consider low to medium signal to noise ratios characteristic of Wideband Code Division Multiple Access (WCDMA) networks. Different fading channel models are considered for comparison between the two schemes. The improvement due to convolutional coding associated with these techniques is also evaluated.     

两个基于身份的数字签名方案的安全性改进

分析了文献[1]提出的两个基于用户身份的数字签名方案，发现其一般签名方案存在安全性缺陷，在此基础上建立了多重签名方案，但此方案也是不安全的。本文给出了改进的签名和多重签名方案。