（yxl）φ切压电石英谐振器振动模式分析

从压电方程，动力学方程入手，分析了（ｙｘｌ）φ切石英谐振器的厚度切变振动，利用自由边界条件及串联与并联谐振时的电学条件，求出了并联谐振频率和串联振频率，讨论了实测频率与频率公式存在一定偏差的原因。     

Workload Distribution in Fault Simulation

Simulation at the gate level is computationally very expensive.Parallel processing is one technique to reduce simulation time.Possessing knowledge of the distribution of computational activity insimulation can aid in parallelizing it efficiently. We present a newcharacterization of the distribution of the computational workload infault simulation. An empirical analysis shows that the workloaddistribution is circuit specific, and is largely independent of thevector set being simulated. An inexpensive method to predict theworkload distribution is also discussed.     

一种基于单片机的变电站控制保护系统的实现

以单片机８０３１ 为核心组成的采集、保护和通信模块，通过ＲＳ４８５ 的连接，与４８６ 工控微机构成了分布式３５ ｋＶ 变电站的自控系统，实现变电站的计量、保护和控制等功能，以达到变电站的无人值守或少人值守。     

MTPM—一种在多Transputer系统上实现OPS5并行匹配的方案

并行匹配是并行处理产生式系统的重要内容之一。本文针对现有RETE匹配算法,提出了一种自行设计的在多Transputer系统上实现OPS5并行匹配的方案,并重点讨论了实现MTPM中的一些技术问题.试验表明,MTPM提供了一条发掘产生式系统固有并行性的可能途径.     

国内外非传统水资源开发利用

非传统水资源主要包括雨水、污水和海水。雨水收集利用、污水资源化和“海水开源”已经成为城市开发新水源的主要措施。阐述了国内外非传统水资源的开发利用现状和发展，总结国外非传统水资源开发利用的经验．并针对我国与发达国家在此方面的差距提出了相应的建议。     

基于集群计算机的保护定值在线校核

采用分布式计算技术，研究并实现了基于集群计算机的保护定值在线校核并行计算方法。首先分析了保护定值校核计算的计算量和计算特点，接着对可能采用的并行计算方法进行比较，最后选择了基于电网分块的并行计算方法。采用协调机加计算子机的计算模式，在协调机上执行分块算法，通过基于主导节点的图划分方法把电网分成几块，每台计算子机只校核1块电网内的保护定值，最后由协调机收集汇总计算结果。现场应用证明，该并行计算方法正确、有效。     

油罐液位温度自动检测系统及其程序设计

本文介绍了燃油火力发电厂油罐液位及温度数据的计算机数据自动采集及处理系统的结构和基于WINDOWS的可视化程序设计方法，该系统结构简单，成本低，采用RS－485数据接口可视现2千米内的数据通讯，是中小企业实现自动化管理的最佳解决方案。     

多级并接型权电阻DAC的设计

多级并接型权电阻解码网络结构简单，分析方便，文章给出了普通的和BCD码多级并接型权电阻解码网络，推导出了各级与运放的连接电阻的通用公式，并用EWB软件进行了电路模拟，这种方法对自行设计权电阻DAC有一定的参考价值。     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

堤身的数据采集及断面设计的几点建议

针对堤防设计的基础资料采集和设计优化，提出了一些合理性建议。