定向凝固Al/C复合材料研究

本文首次进行了Al/C(SiC)复合材料定向凝固,研究了复合材料定向凝固过程以及组织形态与凝固速率的关系,获得了纤维束间胞晶和不同间距的树枝晶,发现非润湿系统复合材料定向凝固后性能降低,文中对其机制进行了探讨.     

山坡建厂与高台段的划分——荻港海螺水泥有限公司工程总体局与竖向设计

通过荻港海螺水泥有限公司(2×2500t/d)工程设计、建成投产的实践,阐述了水泥厂建在山坡上的厂址选择,总体规划布局,厂内道路最大坡度确定,高台段划分及边坡爆破,场地整平压实,护坡挡墙与厂房土建基础埋深等技术问题的处理方法,总结其设计成功的经验和不足之处,为同类型工厂总图布置提供借鉴.     

气体流量对多壁纳米碳管形貌和产率的影响

以CH4为碳源气，以H2为还原气，以纳米NiO-SiO2气凝胶为催化剂，探讨了气相化学沉积法制备多壁纳米碳管工艺过程中，气体流量对产物形貌和产率的影响。实验结果表明，CH4和H2流量保持为2：1，气体总量一定时可以经济地制备出长径比大，形态较好的纳米碳管，且产率较高。     

尼龙6/马来酸酐-苯乙烯多单体接枝聚丙烯反应共混物

用双螺杆挤出机制备了聚丙烯(PP)与尼龙6(PA6)的共混物．先用多组分熔融接枝的方法将马来酸杆（MAH）和苯乙烯（St）共同接枝于聚丙烯（PP）上，制得多单体接枝聚丙烯PP-g-(MAH-St），该接枝物具有较高的MAH接枝率。利用MFR、SEM、TEM和力学性能测试等分析方法，研究了多组分熔融接枝聚丙烯PP-g-(MAH-St)对PA6/PP共混物的形态结构和力学性能等的影响。结果表明，PP-g-(MAH-St)中的酸酐基团与PA6末端的氨基发生化学反应，原位形成的PP-PA6共聚物能有效地改善PA6与PP的相容性，可以使PP均匀地分散在PA6基体中，相区尺寸明显减小，可至0.1μm，并使共混物的力学性能得到均衡的提高，冲击韧性的提高尤其显著，达到了橡胶改性所难以达到的效果。     

Synthesis and characterization of poly(siloxane-urethane)s

A series of polyurethane block copolymers based on hydroxy-terminated polydimethylsiloxane and poly(propylene glycol) soft segments of molecular weights 1818 and 2000, respectively, were synthesized. The hard segments consisted of 4,4′-diphenylnethane diisocyanate and 1,4-butanediol as the chain extender. Samples with different molar ratios were prepared. We tried to synthesize polydimethylsiloxane-based polyurethanes (PDMS-PU) containing a hard block as major fraction and a soft block as minor fraction for preparing toughened rigid systems. After a study of the pure polydimethylsiloxane-based polyurethane and poly(propylene glycol)-based polyurethane (PPG-PU), (mixed polyol)-based block copolymers and blends of PDMS-PU and PPG-PU were synthesized, and characterized by means of differential scanning calorimetry, tensile testing and scanning electron microscopy. In (mixed polyol)-based copolymers and lower hard-segment content blends, macro-phase separation occurred, but blends with higher hard-segment contents showed significant reduction in amounts of phase separation.     

空冷发电厂的热力设计与分析

本文对热力发电厂的汽轮机排汽冷却系统进行了评估。作者编制了计算机程序,并对海勒式空冷系统做了计算,结果显示了塔高、水流速与空气流量、冷却塔与散热器投资以及经济效益的关系。     

腐植酸水处理剂在小合成氨厂的应用与改进

介绍腐植酸水处理剂在小合成氨厂的应用实例，并对存在的问题进行了讨论．     

葛洲坝水电站水轮机磨蚀评析

作为长江第一坝的葛洲坝水电站,其水轮机磨蚀情况引起国内同行的关注。根据长江的水沙特点、葛洲坝工程泥沙研究成果、十年来运行观测实践、水轮机运行及磨蚀修复状况,对葛洲坝水轮机磨蚀的现状进行了评论和剖析,提出了今后评价和解决葛洲坝水轮机磨蚀的九点建议及意见。     

Capacitated Clustering Problems by Hybrid Simulated Annealing and Tabu Search

The capacitated clustering problem (CCP) is the problem in which a given set of weighted objects is to be partitioned into clusters so that the total weight of objects in each cluster is less than a given value (cluster ‘capacity’). The objective is to minimize the total scatter of objects from the ‘centre’ of the cluster to which they have been allocated. A simple constructive heuristic, a R-interchange generation mechanism, a hybrid simulated annealing (SA) and tabu search (TS) algorithm which has computationally desirable features using a new non-monotonic cooling schedule, are developed. A classification of the existing SA cooling schedules is presented. The effects on the final solution quality of the initial solutions, the cooling schedule parameters and the neighbourhood search strategies are investigated. Computational results on randomly generated problems with size ranging from 50 to 100 customers indicate that the hybrid SA/TS algorithm out-performs previous simulated annealing algorithms, a simple tabu search and local descent algorithms.     

组成、粘度比及加工条件对PB／CS共混物粘度和形态的影响

研究了组成、粘度比、转速和混合时间对聚丁烯／玉米浆共混物的粘度和形态的影响。结果表明，共混物的粘度均随转速的提高而增大。在高转速下，８０／２０共混物的粘度比其它组成的共混物的粘度增长迅速。在聚丁烯和玉米浆的界面观察到复合乳化结构。分散相液滴尺寸较小时，液滴尺寸的变化对共混物的粘度有很大的影响。