单稳态触发器的结构及其开关级设计原理

根据单稳态触发器定时单元特性,提出了单稳态触发器的一般结构.在此基础上,运用传输电压开关理论进行了CMOS单稳态触发器的开关级设计研究,并具体设计了两个单稳态触发器.设计实例表明文中提出的方法不仅简单、有效,而且具有通用性.     

Comments on the shortcomings of predicting the precision of Cavalieri volume estimates based upon assumed measurement functions

It is well known that the estimation of an object's volume by means of serial cross-sections, the so-called Cavalieri method, yields an unbiased estimate. But by itself it provides no means by which to estimate how precise this estimate is unless the shape of the volume is fully known beforehand. This knowledge can only be partially determined from the serial section information that is collected. Methods have been developed that claim to surmount this difficulty by using the serial section data to create a mathematical model of the volume's shape properties. The model then is used to estimate (predict) the precision of the volume estimate (its CE) from the single set of data available. Unfortunately, the theory underlying the model is flawed and so the model itself amounts to no more than an unsubstantiated guess about the shape of the volume. Therefore, the precision of the volume estimates that one obtains from the method is only as good as the model and this cannot be ascertained from the single set of acquired data. In this letter I explain the inadequacies of the modelling method. I suggest that it be used only with caution, if at all. Instead I suggest two alternative ways to predict the CE, one that is based upon a rule-of-thumb approach to the object's shape, and another that is based upon spectral analysis of the measurement function and that is easy to implement with available computer software.     

基于模糊事件概率理论的水质风险率计算方法

针对水环境系统的随机不确定性和模糊不确定性，分析了影响水环境中水质风险的不完善性和模糊性因素，将水环境中水质风险作为一个模糊事件，利用模糊事件概率理论，提出了水环境水质超标的模糊随机风险率计算模型。通过引入模糊事件信息熵来评价隶属函数特征值取值的可靠程度，定量描述了隶属函数特征值与风险率的关系，进而计算出风险率。实例计算结果证明了方法的有效性。     

浮基多刚体系统动力分析

引入浮体势流流固耦合理论和多刚体力学的凯恩方法对浮基多刚体系统进行动力分析。考虑入射规则波的影响和上部作业物体进行回转作业、升降作业的影响，建立了浮基多刚体系统的运动方程，讨论了浮基多刚体系统运动方程在三类情况下的求解途径。     

壳体理论在水压爆破中的应用

在壳体理论的基础上,考虑到薄壳型结构水压爆破的特点,提出了一种新的药量计算公式,并得到了初步实际工程验证.     

Synthesis and Characterization of Nanosized ZSM-5 Zeolite with Mesoporous Carbon Nanotube as Templates

Preparation of nanocrystalline ZSM-5 has been proven possible with carbon matrix by using confined space synthesis. In combination with the hydrothermal method, by the use of a mesoporous carbon nanotube as the inert support material, ZSM-5 with SiO₂/Al₂O₃ ratios of 100 was successfully synthesized with an average crystal size of 27 nm. Their structures were preliminarily characterized by x-ray power diffraction (XRPD) and infrared spectroscopy (IR), and scanning electron microscopy (SEM), respectively. At the same time, we put forward the mechanism about the confined space synthesis in terms of the results.     

Process and technology challenges in swift-starting virtual teams

Virtual teams often face tight schedules and a need to start quickly and perform instantly. The goal of our study was to enhance understanding of the challenges faced by such teams. We used time–interaction–performance theory as the framework for following the processes and functions within virtual teams working on a systems development task. Our study provided a detailed examination of the group process, applied to virtual teams working under time pressure. The challenges faced by virtual teams in such settings showed that teams must work to enhance their effectiveness in multiple dimensions.     

The mirror effect and mixture signal detection theory.

The mirror effect for word frequency refers to the finding that low-frequency words have higher hit rates and lower false alarm rates than high-frequency words. This result is typically interpreted in terms of conventional signal detection theory (SDT), in which case it indicates that the order of the underlying old item distributions mirrors the order of the new item distributions. However, when viewed in terms of a mixture version of SDT, the order of hits and false alarms does not necessarily imply the same order in the underlying distributions because of possible effects of mixing. A reversal in underlying distributions did not appear for fits of mixture SDT models to data from 4 experiments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Describing metal surfaces and nanostructures with orbital-free density functional theory

Orbital-free density functional theory (OF-DFT) can be made to scale linearly with sample size, allowing thousands of atoms to be treated explicitly with quantum mechanics. State-of-the-art kinetic energy density functionals and ion–electron pseudopotentials are used to obtain accurate structural property predictions for nanoparticles, nanowires, extended surfaces, and nanoindentation of simple metals.     

Minimum-Energy Translational Trajectory Generation for Differential-Driven Wheeled Mobile Robots

Mobile robots can be used in many applications, such as exploration, search and rescue, reconnaissance, security, and cleaning. Mobile robots usually carry batteries as their energy source and their operational time is restricted by the finite energy available from the batteries. Therefore, energy constraints are critical to the service time of mobile robots. This paper investigates the minimum-energy control problem for translational trajectory generation, which minimizes the energy drawn from the batteries. Optimal control theory is used to find the optimal velocity trajectory in analytic form. To demonstrate energy efficiency obtainable, we performed simulations of minimum-energy velocity control and compared the results with loss-minimization control and energy-optimal trapezoidal velocity profiles. Simulation results showed that significant energy savings can be achieved, of up to 9% compared with loss-minimization control and up to 10% compared with energy-optimal trapezoidal velocity profile. We also performed an actual robot experiment using Pioneer 3-AT platform to show the validity of the proposed minimum-energy velocity control. The experimental results revealed that the proposed minimum-energy velocity control can save the battery energy up to 10% compared with loss-minimization control. Categories (3): Robot control, (5): RobotMotion Planning