Optimizing a multiserver queuing system with a variable number of servers

A multiserver Poisson queuing system with losses, with a variable number of servers, and an additive quality functional is investigated. All major characteristic of the system are obtained in an explicit form. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 4, pp. 92–101, July–August 2007.     

Subspace identification of MIMO LPV systems using a periodic scheduling sequence

A novel subspace identification method is presented which is able to reconstruct the deterministic part of a multivariable state-space LPV system with affine parameter dependence, in the presence of process and output noise. It is assumed that the identification data is generated with the scheduling variable varying periodically during the course of the identification experiment. This allows to use methods from LTI subspace identification to determine the column space of the time-varying observability matrices. It is shown that the crucial step in determining the original LPV system is to ensure the obtained observability matrices are defined with respect to the same state basis. Once the LPV model has been identified, it is valid for other nonperiodic scheduling sequences as well.     

非规则分布相同结构的零件的计算机三维造型方法研究

这里根据轮盘、板类等常用机械零件一般含有规则和非规则分布的相同结构的特点，总结出应用功能强大的Solid Works软件进行该类零件三雏设计的多种实用方法，给出了含有非规则分布的相同结构零件的快速设计方法，并分析了各种方法的应用场合。     

复杂山区静校正方法研究及效果

对于山区地震勘探，开展静校正研究是资料处理的主要问题之一。静校正精度与剖面质量密切相关，准确的静校正取决于合理的方法和正确的应用。本文在分析了复杂山区特点以及静校正难点的基础上，指出要解决好山区静校正，仅限于普通的方法是远远不够的，必须从四个关键点人手，即风化层延迟时的求取、基准面的确定、校正速度的研究以及表层模型的建立等。本文对上述问题的研究做了介绍，展示了合成延迟时法十等效速度模型反演十变速浮动基准面（地震参考面）静校正等综合技术在太行山区（山西沁源、大寨）、伊J；1丘陵山区等复杂地表区应用的例子。显著的处理效果表明，严重的山区静校正问题得到了较好的解决，满足了地下构造的叠加成像，提高了勘探精度及其整体效果。     

数字微波无线通信系统中的中频自适应均衡器

在数字微波无线通信系统中，由于多径衰落引起码间干扰，使系统性能恶化，必须采用抗多径衰落的措施．中频频域均衡器（ＩＦＥ）由于结构简单而且经济，在衰落不十分严重的情况下性能良好，因而在数字微波系统中被广泛采用．本文比较了几种常用的ＩＦＥ，并着重对自适应谐振武中频均衡器的两种调节方法作了研究．模拟计算得到的ｓｉｇｎａｔｕｒｅ曲线表明，这种均衡器对非最小相位（ＭＭＰ）信道的传输性能有很大的改进，且两种调节法可达到相近的结果，如选择其中较简单的调节法，可以简化硬件结构．     

Some Notes on the Formal Properties of Bidirectional Optimality Theory

In this paper, we discuss some formal properties of the model ofbidirectional Optimality Theory that was developed inBlutner (2000). We investigate the conditions under whichbidirectional optimization is a well-defined notion, and we give aconceptually simpler reformulation of Blutner's definition. In thesecond part of the paper, we show that bidirectional optimization can bemodeled by means of finite state techniques. There we rely heavily onthe related work of Frank and Satta (1998) about unidirectionaloptimization.     

Identification of delayed system using instrumental variable method

System identification uses system inputs and outputs to raise mathematical models.Various techniques of system identification exist that offer a nominal model and an uncertainty bound.Many practical systems such as thermal processes & chemical processes have inbuilt time delay.If the time delay used in the system model for controller design does not concur with the actual process time delay,a closed-loop system may be unstable or demonstrate unacceptable transient response characteristics so here the time delay is assumed to be time-invariant. This paper proposes on-line identification of delayed complex/uncertain systems using instrumental variable(Ⅳ) method.Parametric uncertainty has been considered which may be represented by variations of certain system parameters over some possible range.This method allows consistent estimation when the system parameters are associated with the noise terms,as the IV methods(IVM’s)usually make no assumption on the noise correlation configuration.The faster convergence of the parameters including noise terms has been proved in this paper.Iterative prefiltering(IP)method has also been used for the identification of the delayed uncertain system and the graphical results given in this paper demonstrate that the convergence results are inferior to the instrumental variable method.     

可控的高度规整三角网格生成算法

本文提出了一种新的用户可控的高度规整三角网格生成算法.通过在网格表面上构造3个标量场,利用其等值线相交生成高度规整的三角网格.算法借助N-对称方向场来指导生成网格的边方向,在网格表面指定密度场来控制采样密度,同时还提供了特征对齐和对带边界模型的处理能力.所有的控制需求都被纳入标量场求解框架中统一优化.实验表明,本文的方法能够满足多种用户控制需求,生成高度规整的三角网格.     

给排水设备的电气控制安装与调试

针对2011年和2012年全国中职院校竞赛项目使用的《建筑设备给排水控制调试装置》设备,对其电气控制部分的安装调试过程进行分解。     

Concurrent reading while writing revisited

A modification is proposed to Peterson's construction of 1-writern-reader multivalued atomic shared variableusingn+2 multivalued safe variables and some boolean atomic variables. The resulting construction is elegant and is simpler than the original one. K. Vidyasankar received B.E. (Elec. Engg.) from Thiagarajar College of Engineering, Madurai, M. Tech. from I.I.T. Kanpur, India, and Ph.D. in Computer Science from University of Waterloo, Canada. He is now an Associate Professor in Computer Science at Memorial University of Newfoundland, Canada. His research interests include concurrency control and recovery in database systems, concurrency in interprocess communication, design and analysis of algorithms, and graph theory.A prelininary version of this paper, under the title Improving Peterson's Construction of 1-Writern-Reader Multivalued Atomic Register, appears in the Proc. 26th Annual Allerton Conference on Communication, Control, and Computing, University of Illinois at Urbana Champaign, September 1988, pp 693–700