Rates of Crystallization of Dried Lactose-sucrose Mixtures

The isothermal crystallization kinetics of glassy lactose/sucrose mixtures were studied at several storage temperatures (close to T_g and T_m). The kinetic parameters implicit in the Avrami equation were determined. Activation energies for transport (E_D) and surface nucleation (W*) were also found and correlated to the molar composition of the lactose/sucrose mixtures. A monotonic increase in the half crystallization time (t_1/z), Avrami index (n), % crystallization per day, activation energy for transport (E_D) and surface nucleation energy (W*) and a decrease in the crystallization velocity constants (K) were related to the increase in the lactose content of lactose/sucrose mixtures.     

Process Variables, Gelatinized Starch and Moisture Effects on Physical Properties of Mungbean Noodles

The effects of amounts of gelatinized starch and moisture in the final slurry or dough, cooking time, holding time, and holding temperature on physical properties of mungbean noodles were studied. Cooking loss, cutting stress, work to cut, and transparency of noodles were measured. Moisture content of the final slurry or dough, cooking time, and holding temperature were the most important factors that affected physical properties of mungbean noodles. Processing should be done at moisture contents not exceeding 55%, cooking times not longer than 40 set, and holding temperatures not lower than 3° using 5% of total starch as gelatinized starch and holding time of 36 hr.     

Breaking of structural dormancy in seeds of Tetrapleura tetraptera by Aspergillus niger

Aspergillus niger (strain UUF9202) significantly reduced the dormancy period and boosted aggregate germination percentage (AGP) in seeds of Tetrapleura tetraptera. A net reduction in mean germination time (MGT) to 12 days and an increase from 0 to 42% AGP were obtained in 32 days. The optimal spore inoculum of the fungus was 8.5 × 10≥10 ml^?1 per 100 seeds in 96 h pregermination incubation. The potential of some physical factors in combination with this fungal concentration in enhancing AGP was evaluated. The treatments were as follows: (i) hot water scarification at 30°C, 50°C, 80°C and 100°C plus A niger; and (ii) nicking by decoating at either the micropylar or chalazal ends plus A niger. Micropylar scarification plus A niger gave the highest AGP (94%) followed by chalazal scarification plus A niger (86%) and hot water dip at 80°C + A niger (82%). The control seeds which were soaked in presterilised (by autoclaving at 121°C for 15 min) A niger spore suspension at 30°C gave zero germination.     

激光相变硬化性能与工艺参数关系的数学模型

用回归正文分析的方法．建立了中碳结构钢、碳素工具钢和合金结构钢的激光相变硬化性能与工艺参数间关系的数学模型。分析了回归力程的显著性并预测了各硬化指标的精度。     

周期查询式门限服务排队系统中信息分组的延迟分析

本文采用嵌入马尔可夫链理论和概率母函数的方法，对在离散时间状态下的周期查询式门限服务排队系统进行了分析，推导出信息分组的平均等待时间公式，改进了文献［３］中的计算结果。     

分组网与ISDN互连的性能分析

本文研究分组交换数据网与ＩＳＤＮ互连的性能分析，文中考虑了分组肉与窄带ＩＳＤＮ和宽带ＩＳＤＮ互连时信关所应完成的功能，分别给出了两种情况下的信关排队模型；在信关存储容量分别为有限和无限的情况下，对两种模型进行了求解，给出了阻塞概率和平均延迟的表达式。对于与Ｂ－ＩＳＤＮ互连的情况，提出了用开关确定性过程来描述输出排队的分组到达流，并提出了一种小时隙方法分析ＳＤＰ／Ｄ／１排队。     

RS码频域编译码的计算机模拟

频域编译码是近年来由Ｂｌａｈｕｔ等人提出来的纠错码编译方法。本文介绍了在时域和频域编译ＲＳ码的基本方法，并给出了在移动信息道的简单分群Ｍａｒｋｏｖ模型下频域编译码的计算机模拟方法和结果。     

方波信号在音频技术中的应用

本文重点介绍了方波依赖在音频测量，设备的维护检测及录音均衡自动调节等音频技术中的应用，并通过对方波信号的频谱特性和方波信号通过线性系统的频域特性的分析，简要说明了方波信号在应用电路中的基本工作原理。     

光纤传感器的标定曲线拟合与误差分析

本文介绍了一种求取实际光纤传感器标定曲线及函数的有效方法。以压电式光纤电压传感器实测数据为例，详细患解出了其标定函数和曲线，并进行了误差分析。