嵌入随机概率模型的模具项目模板及其应用

针对模具生产中存在的不确定性因素,在考虑企业关键资源有限性的前提下,采用嵌入随机概率模型的模具项目模板,实现多项目调度,能够为企业制定较为准确且符合实际生产情况的项目计划。     

Species separation during coating growth on aluminium by spark anodizing

The mechanism of coating growth during sparking anodizing of aluminium is probed by use of an electrolyte containing both silicate and phosphate ions, with subsequent determination of the locations of silicon and phosphorus species through the coating thickness. Importantly, the main alumina-based layer of the coating contains incorporated silicon and phosphorus species of differing distributions. Phosphorus species are primarily found in a region next to the metal, representing roughly about 30% of the layer thickness. Silicon species are located mainly above this region to the layer surface. New coating material is added in discreet amounts associated with breakdown events, which provide short-circuit paths through the layer. The growth processes within the discharge region result in separation of the silicate- and phosphate-derived species, which may relate to their different mobilities, dependent upon factors such as charge, size and bonding with other species. Further, silicon-rich material is deposited at the surface of the alumina-based layer, which is often encountered in spark anodizing in silicate electrolyte.     

Upscaling hydraulic conductivity: theory and examples from geohydrological studies

This paper presents an overview of the theory of upscaling hydraulic conductivity and describes two case studies in which some of this theory has been applied. The representative hydraulic conductivity of a numerical model block (block conductivity for short) is defined in terms of smaller scale hydraulic conductivities. Also, using elementary examples, some general properties of block conductivities are given. Analytical solutions for the block conductivity are presented that were derived by various authors for uniform flow conditions both in a deterministic and in a stochastic setting. Some results of the hydraulic upscaling theory are illustrated by two case studies from the Netherlands. The first case study deals with deriving the representative hydraulic conductivity tensor of a clay layer. Upscaling results are compared with traditional harmonic averaging. In the second case study the upscaling is used to derive the three-dimensional distribution of block conductivities for a numerical groundwater model of a confining layer of complex deposits. Here stochastic upscaling is used together with a geostatistical simulation approach. The simulated block conductivities are used in a numerical groundwater model and results are compared with pumping tests. When the upscaling is ignored groundwater flow through the deposits is predicted wrongly.     

Maximum principle for mean-field jump–diffusion stochastic delay differential equations and its application to finance

This paper investigates a stochastic optimal control problem with delay and of mean-field type, where the controlled state process is governed by a mean-field jump–diffusion stochastic delay differential equation. Two sufficient maximum principles and one necessary maximum principle are established for the underlying system. As an application, a bicriteria mean–variance portfolio selection problem with delay is studied to demonstrate the effectiveness and potential of the proposed techniques. Under certain conditions, explicit expressions are provided for the efficient portfolio and the efficient frontier, which are as elegant as those in the classical mean–variance problem without delays.     

路径长度受限的随机需求VRP的模型和算法

路径长度受限的随机需求VRP在生产、生活中有着广泛的应用。给出了路径长度受限的随机需求VRP问题的线性整数规划模型,在不允许部分服务和仅能服务失败一次的策略下设计了一个启发式算法。该算法以离散优化中广泛应用的扫描算法为基础生成服务的一个初始可行方案,然后利用模拟退火算法改进得到近似最优解。对需求为二项分布的50个结点、1个服务中心的问题进行了数值试验,数值结果表明该算法对求解路径长度受限的随机需求VRP是有效的。     

气流床气化炉停留时间分布的随机模型

基于气流床气化炉流动特征 (区域模型 ) ,进行状态离散 ,建立停留时间分布随机模型。模拟结果与实验值相符 ,显示气化炉内是随机过程 ,证实炉内存在回流和短路 ,流型趋向于全混流     

Entanglement Loss in Fast-Flowing Entangled Polymer: Numerical Simulation of The Short-Chain Behavior and Interpretation of Phenomenology

Although some of the important consequences of flow-induced entanglement loss in entangled polymer rheology have recently been recognized, this specific molecular mechanism has rarely been investigated quantitatively based on experiments or molecular theories. For the first time, the amount of entanglement loss of a short entangled linear polymer (i.e., seven entanglements per chain at equilibrium) during fast-flow deformation is directly tracked in the stochastic simulation of an existing reptation model. The primary finding is that significant entanglement loss is observed in both fast elongation and fast shearing, and, contrary to some earlier conjectures, is particularly pronounced in elongational flow when polymer chain stretching formally commences. Furthermore, according to the current simulation in which three different CCR (Convective Constraint Release) schemes are considered, entanglement loss appears to have very prominent effects on the elongational rheology of an entangled linear polymer – an observation that had rarely been recognized or considered before. On the other hand, the currently explored features of flow-induced entanglement loss are tentatively linked to a wide variety of peculiar empirical properties of temporarily entangled polymer liquids. In particular, we are thus able to provide a consistent molecular explanation of the fairly well-known phenomenological effects of polydispersity and long-chain branching leading to a pronounced strain-hardening phenomenon, in view of two newly proposed effects of heterogeneous relaxations in preventing, directly or indirectly, fast entanglement loss during flows.     

A multi-echelon production–inventory system with supply disruption

The article investigates an integrated multi-layer supply chain model consisting of supplier, manufacturer and retailer while supply disruption, machine breakdown, safety stock, maintenance breakdown occur simultaneously. At beginning of the production, manufacturer keeps some raw materials in stock received from second supplier at high price, as safety stock due to supply disruption of first supplier. Corrective maintenance is done immediately to restore its normal stage when machine breakdown occurs. Stock out situations at manufacturer and retailer are considered due to disruption of production for machine breakdown. The integrated expected costs of the chain in centralized (collaborating) and decentralized (Stakelberg approach) system are compared. A numerical example and its sensitivity analysis are provided to test feasibility of the model.     

制气废热锅炉故障分析及对策

制气废热锅炉用于吸收制气炉产生的尾气余热，是一种节能设备。该炉利用煤气发生炉的尾气通过换热反净化的水加热成饱和蒸汽，以供生产之用。本文就我厂重油裂解制气系统中三台废热锅炉出现的故障进行分析，从中找出故障的原因及处理办法。     

基于Monte Carlo随机模拟的综合交通网络布局评价与决策方法

针对综合交通网络评价指标权重及属性值具有主观性和随机性的特点,提出了基于模拟运算的布局规划方案排序选优的群体随机决策方法.仿真生成满足集结的多个专家对指标重要性偏好排序统计分布的权重,同时考虑交通需求的不确定性对指标值的影响,结合客观熵权计算方案的综合评价值,由多次模拟得到的排序优势度确定方案的优劣差异.根据设计的仿真流程通过算例说明了方法应用的有效性,评价中考虑了主客观因素及随机性特征,可以为网络布局提供科学决策依据.