腐蚀算法在重建一类特殊管道中的应用

针对一类特殊而不能直接对其观察的管道（如动物的血管），为了准确了解其内部特征和形态，借助计算机给出了一种用腐蚀算法来重建管道原形的方法。这种方法简单易行，而且精确度高。     

用于X光激光实验的反射式线聚焦光学系统的设计和分析

基于三维光线追迹的象差计算,对卢瑟福实验室用离轴球面反射线聚焦系统作了分析。然后,首次提出了用于X光激光实验的两类新的反射式线聚焦构型,即反射式光楔列阵和光锥列阵系统,并作了计算。最后,对所得结果作了比较和讨论。     

Application of a Three-dimensional Wind Driven Circulation Model to Assess the Locations of New Drinking Water Intakes in Lake Ontario

A 3D transport model is used to perform a comparative analysis of several potential drinking water intakes located along the northwest shore of Lake Ontario between Toronto and Oshawa. The model is specifically used to assess each intake under both long- and short-term transport of a potential pollutant release from the Pickering Nuclear Generating Station and potential and actual pollutant releases from local land sources respectively. A model based on a 500 m grid resolution is calibrated using data collected in the aftermath of the 1992 tritium spill at the Pickering Nuclear Generation Station and subsequently used to simulate long-term transport. A model based on a 100 m grid resolution is verified using drogue studies and used to simulate short-term transport events. Both models are used to assess pollutant levels at each of nine potential intake locations under different wind scenarios and pollutant releases. Field data for the study included water quality and flow measurements from local sewers and rivers, and estimates of pollutant levels from the local waste water treatment plants. This paper describes the model setup for both the long-term and short-term transport models, calibration using field data, long-term transport modeling, short-term transport modeling, and the comprehensive analysis approach used to evaluate the nine potential intake locations proposed. Results indicated that four intakes in particular outperformed other intake locations by maintaining bottom pollutant levels within governmental standards and warning times that exceeded 20 hours.     

管线钢管夏比冲击试验注意事项

结合管线钢管标准规范,分别从取样、试样加工、试验设备及试验过程等方面分析了管线钢管夏比冲击试验中可能出现的问题,并针对试验温度控制和操作过程提出了几点建议.     

低碳微合金钢中的晶内铁素体及组织控制

回顾和评述了晶内铁素体的发现、发展及其与组织控制的关系.介绍了晶内铁素体的形核机制和影响晶内铁素体形成的因素,讨论了晶内铁素体的三维形态和长大动力学,并从以上几方面分析了晶内铁素体对低碳微合金钢组织细化的重要作用和影响.     

Ultrasonic measurement of the inter-electrode gap in electrochemical machining

During the process of electrochemical machining the dependency of the inter-electrode gap with time and process parameters can be used to determine process characteristics and to define the shape of the workpiece surface relative to the tool surface. Defining process variables to map out the required gap-time function requires the use of time-consuming iterative trials. In-line monitoring of the gap would enable process control and tool to workpiece transfer characteristics to be achieved (for ideal conditions) without the requirement to generate such parameter maps. This work explores the use of ultrasound applied as a passive, non-intrusive, in-line gap measurement system for ECM. The accuracy of this technique was confirmed through correspondence between the generated gap-time and current time data and theoretical models applicable to ideal conditions. Gap measurements are also used to demonstrate and quantify the degree of departure from ideal behaviour for an In718/chloride system as the electrolyte flow rate is reduced from 16 to 4 l min⁻¹. The monitoring of the gap size has also been shown to be effective when determining shape convergence under ideal conditions, for the example case of a 2D sinusoidal profile.     

展望21世纪的制造业及相关技术

综述了制造业未来的发展前景，重点分析了与制造业相关的制造系统、机械加工技术、生产组织形式、人员素质的发展趋势。     

热流体喷射变形机理与喷嘴结构

高速短程纺技术能生产三维卷曲短纤维,该技术的关键之一是热流体喷射装置。本文介绍了热流体喷射装置的演变与特点及它的加工机理和某些已应用的实际装置。     

微电机与微加工

简述了和微电机相关的微加工生产中的方法，介绍了微型机电部件成型的实现途径。     

Resilient metal spring network silicone-matrix composite for separable interconnections

Resilient metal spring silicone-matrix conducting composites for separable interconnections in electronics were fabricated by the impregnation of silicone into a preform comprising randomly oriented C-shaped Cu-Be springs and a small proportion of Sn-Pb solder, which served to connect the springs at some of their intersections. Composites containing 6.1-9.8 vol.% total filler exhibited volume electrical resistivity 0.5-1.0 mΩ.cm and contact resistivity (with copper) 11-17 mΩ.cm². A compressive stress of about 30 kPa was needed for the low contact resistivity to be reached. The volume 17-26% and the contact resistivity increased by 5% after heating in air at 130-150°C for seven days. Composites containing <9 vol.% total filler showed no stress relaxation for seven days at 6.0% strain.