包钢氟污染治理成效及对策

本文介绍了包钢历年来氟污染治理成效以及控制外排氟总量达标的具体措施.     

Interfacial Dipoles and Radiated Energy

Electric dipoles radiate an electromagnetic field into their surroundings. The electric and magnetic fields from a point source or from linear dipoles have components parallel to a spherical surface but also a radial component. In most investigations on radiated fields, only the part of the electric field that is parallel to a spherical surface is taken into account. The argument is that only that component contributes to the radiated energy. Here we show that the phase front in the lower half space is not a spherical surface and hence, the radial components contribute to radiated energy. We show differences in radiation patterns for point electric dipoles and linear dipoles, either modeled as perfectly conducting wires or as resistively loaded wires. Our primary interest lies with improving image resolution through processing of Ground-Penetrating Radar data. Here the emphasis lies with understanding the radiation characteristics of linear dipoles that can be incorporated with image processing algorithms. The model uses a thin-wire approximation for the transmitter antenna. The solution to the discrete system of equations is solved, incorporating interaction between the interface, using a CGFFT scheme including symmetrization and a newly developed preconditioning operator. We look at the electric and magnetic fields as well as the time-averaged Poynting vector radiation patterns in the E-plane and H-plane of the transmitting antenna. The results show that the radial component of the radiated electric and magnetic field is not negligible, even at distances more than seven wavelengths away from the antennas.     

粉喷桩及其应用

简介了目前采用的粉喷桩的基本工作过程。叙述了水泥粉喷桩的加固机理：①水泥的水解和化学反应；②离子交换和团粒化作用；③水泥的凝结与硬化；④碳酸化反应。介绍了粉喷桩的应用范围，并结合工作概况、场地概述、地基加固方案选择、粉喷极的设计和质量检查等具体过程给出粉喷桩的具体应用实例。     

新一代高强韧性WDL系列钢综合性能及应用

本文着重介绍武汉钢铁公司近年来研制开发的第二代高强度低合金钢—高强韧性WDL系列钢的综合性能及应用情况。该钢具有优异的焊接性能和低温韧性,板厚≤50mm钢板焊前不预热或稍加预热而不产生焊接裂纹,是制造大型压力容器（特别是低温和常温球罐）、水电站压力钢管和水轮机蜗壳、高寒地区使用的大型工程机械、大跨度桥梁及海上采油平台等装备的理想用材。     

OFDM技术及其应用

首先对OFDM的发展以及应用做了简要的介绍,然后讨论了当前OFDM研究过程中的两个关键技术问题,最后展望了OFDM的未来发展。     

节流式差压流量计的发展和现状

文章介绍节流式差压流量计的特点及标准化进程，煤气流量测量中存在的难点以及正在试图解决的途径。     

SJT-B助剂/表面活性剂/聚合物三元复合体系的黏度和界面张力研究

助剂SJT-B是10%的磷硅酸盐胶体溶液,含有Na^＋和K^＋、SiO3^2-和PO4^3-等离子,在活化状态下一部分SiO3^2-和PO4^3-生成具5个负电荷的聚磷硅酸根链状阴离子,后者可结合Ca^2＋、Mg^2＋而形成纳米磷硅酸盐胶态粒子,避免结垢并防止金属腐蚀。以助剂SJT-B代替NaOH,用大庆油田回注污水配制SJT-B/烷基苯磺酸盐/聚合物三元复合溶液,取SJT-B浓度为1.0-8.0 g/kg,石油磺酸盐浓度为0.5-4.0 g/kg,聚合物浓度为1.2 g/kg,按排列组合法得到25个实验配方。对照NaOH/石油磺酸盐/聚合物溶液组成为12/3.0/1.2 g/kg,初配黏度（45℃,7.34s^-1）27.3 mPa·s,界面张力（45℃）3.20×10^-3mN/m。初配各实验配方溶液黏度31.2-44.8 mPa·s,45℃老化30天后黏度降低率2.71%-36.97%;初始界面张力最低值1.13×10^-3mN/m,最高值4.34×10^-2mN/m,在界面活性图上,10^-3mN/m超低界面张力区出现在高SJT-B和烷基苯磺酸盐区,老化后该区扩大。筛选出的SJT-B/石油磺酸盐/聚合物体系组成为4.0/3.0/1.2 g/kg,其初始黏度为37.1 mPa·s,老化后黏度降低3.77%,初始界面张力1.79×10^-2mN/m。图2表3参8。     

Production of biodiesel from waste fryer grease using mixed methanol/ethanol system

Transesterification of waste fryer grease (WFG) containing 5–6 wt.% free fatty acid (FFA) was carried out with methanol, ethanol, and mixtures of methanol/ethanol maintaining the oil to alcohol molar ratio of 1:6, and initially with KOH as a catalyst. Mixtures of methanol and ethanol were used for transesterification in order to use the better solvent property of ethanol and rapid equilibrium using methanol. Formation of soap by reaction of FFA present in WFG with KOH instigated difficulty in the separation of glycerol from biodiesel ester. To untangle this problem, two-stage (acid and alkali catalyzed) method was used for biodiesel synthesis. More than 90% ester was obtained when two-stage method was used compared to ∼ 50% ester in single stage alkaline catalyst. In the case of mixed alcohol, a relatively smaller amount of ethyl esters was formed along with methyl esters. Acid value, viscosity, and cetane number of all the esters prepared from WFG were within the range of the ASTM standard. Esters obtained from WFG showed good performance as a lubricity additive.     

IP网络资源调度与接纳控制技术研究

从IP QoS技术的研究现状出发,结合IETF的研究成果与电信网NGN的技术发展方向,阐述基于策略的端到端接纳控制框架的技术原理,在各大标准组织的技术框架内,给出一个具体的、切实可行的实现方法。     

Prediction of fire classification for wood based products. A multivariate statistical approach based on the cone calorimeter

Wood has long traditions as a building material, and is often used in construction elements, and as interior and exterior surfaces in the Nordic countries. In most applications, there are reaction to fire requirements to products used as surfaces, e.g. in escape routes and larger public spaces. Most wood products will therefore have to be treated with fire retardant (FR) agents to fulfil the strict requirements to properties connected to heat release and flame spread. Unfortunately, FR agents usually also increase the smoke production, as they cause a more incomplete combustion of the wood. The wood product manufacturers seek to find the optimal amount of FR additives where both heat release and smoke production in the classifying test are within the requirements given in the building regulations. This paper describes models for prediction of the European reaction to fire classes of wood products. The models are based on multivariate statistical analysis, and use test results from the cone calorimeter test as input. The presented models are, with very good precision, able to predict which Euroclass and additional smoke class a wood based product would obtain if it were to be tested in the single burning item test. Copyright © 2006 John Wiley & Sons, Ltd.