翻领成型器领口曲线的程序计算展开法

根据翻领成型器领口曲线的数学模型，介绍一种利用计算器复杂公式存贮的特殊功能，预编程序计算相关参数。然后画领口曲线展开图的方法。     

Microscopic fatigue processes in a plain-weave glass-fibre composite

This paper focuses on the microscopic damage and progressive failure of a composite reinforced by plain-weave glass cloth under tensile fatigue loading. The fatigue process was divided into three stages like that of multi-directional laminates. It was found that the internal damage at each stage (matrix cracks, debonds in the weft, successive debonds in the warp and ‘metadelaminations’ between warps and wefts) occurred near the cross-over point of the fabric. The modulus decay mechanism was explained by considering the progression of this internal damage. From the end of the first stage to the beginning of the middle stage, a characteristic damage state (CDS) (called a ‘meta-CDS’) was observed. It was found that woven composites have a unit area of damage accumulation (called a ‘unit cell’) and the damage of each unit cell and its distribution control the total fatigue damage of the material.     

沈阳太平洋广场空调冷热源方案比较

对一幢１１．５万ｍ＾２的四星级综合建筑的空调冷热源不同的蓄冷和取冷比较了四种方案，论证了其中直燃型溴化锂吸收式冷热水机组供冷供暖、小型燃油锅炉供蒸汽的方案最为合理。     

抽油机技术经济指标的模糊综合评价

针对我国抽油机评价过于笼统、模糊，缺乏全面性和综合性以及评价方法可操作性差的现状，提出了抽油机技术经济指标模糊综合评价方法。在确定抽油机评价指标的层次体系基础上，建立了抽油机技术经济指标模糊综合评价的数学模型，并以某厂CYJ10－3－53HB型抽油机为实例，对其运动和动力性能作了综合评价。这种模糊综合评价方法全面考虑各种性能指标以及它们对抽油机总体性能影响的不同程度，能得到较合理的评价结果，而且有较强的可操作性。     

三维定量储层地质模型与参数动态预测方法

提出了三维定量储层地质模型及其参数动态预测方法，用该方法可预测储层开采状态，水淹区及剩余油区分布和各剩余油区的可采储量，三维定量储层地质模型的预测图件可为合理开采提供依据。     

Use of helical parameters to generate candidate conformations for crystal packing: illustrative application to a polyimide

This communication describes the application and extension of a method for calculating the helical parameters with which to describe molecular conformations. The method, which was originally developed by Shimanouchi and others, is applied to a polyimide of 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and 2,2-dimethyl-1,3-(4-aminophenoxy)propane (DMDA) which has eight torsional bonds in the chemical repeat unit. Discrete low energy states for these torsions were determined by Ramanchandran energy maps of sequential dihedral pairs or single bond torsional energy diagrams. The total number of possible low energy conformations for these states is 1152 including conformationally related isoenantiomorphs. The method conveniently generates the conformations for subsequent crystal structure packing and refinement. Consideration of these together with the X-ray data of Cheng and co-workers reduces the number to about 15 with about a 2/1 conformation and a c axis of approximately 49.2 Å. Of these, about half appear to be good candidates for crystal packing.     

采用先进技术提高装置运行水平

介绍了中国石油化工股份有限公司高桥分公司 1.4Mt/a同轴式重油催化裂化装置的特点和生产情况。为了满足市场需求 ,提高经济效益 ,几年来在该装置上又采用了一些新技术 ,使装置的运转水平进一步提高。如应用降烯烃催化剂GOR Q ,与使用MLC 5 0 0催化剂相比 ,汽油烯烃体积含量约 30 % ,下降 8～ 10个百分点 ;汽油辛烷值基本不变 ;产品分布改善 ;液体收率增加 ;柴油性质变化不大。又如最大量烷烃异构化 (MIP)新型提升管反应系统的应用 ,与常规催化裂化相比 ,产品分布相当 ,汽油的烯烃体积含量下降至 30 %～ 35 % ,MON增加 0 .5～ 0 .8个单位 ,RON下降幅度不大于 0 .5个单位     

再谈冶金学中使用国际单位制的若干问题

讨论了近年来在冶金书刊中作为国际单位制推行的质量分数和传统的质量百分浓度的关系，指明了出现计算错误的可能性，并联系热力学函数的标准状态进行了分析。也提出了冶金学中使用国际单位制目前还存在的若干问题。     

电控汽车发动机故障模拟--诊断台的制作及使用简介

介绍电控汽车发动机(以丰田4VZ-TE电控发动机为例)故障模拟——诊断控制台的制作原理、过程、使用及制作意义。     

弹性筛管防砂技术

弹性筛管防砂技术是根据稠油油藏高轮次吞吐和蒸汽驱井防砂生产需要而研制的筛管防砂新技术。进行了筛管结构优化、加厚过滤单元外罩设计、固定方式研究、弹性过滤材料筛选、防腐实验研究等。室内试验表明，筛管的过流能力在900cm^2／m以上、渗透率在100μm^2以上、筛管抗内、外压强度达到20MPa、防砂粒径在0.1mm以上、耐温350℃、pH值在3～12之间不被腐蚀。现场试验证明，该技术防砂和抗堵塞性能好，防砂有效期长，地层适应性强，施工简便，防砂生产效果明显，具有良好的应用前景。