Computational Implementation of Asymmetric Integral Imaging by Use of Two Crossed Lenticular Sheets

We propose an asymmetric integral imaging method to adjust the resolution and depth of a three‐dimensional image. Our method is obtained by use of two lenticular sheets with different pitches fabricated under the same F/#. The asymmetric integral imaging is the generalized version of integral imaging, including both conventional integral imaging and one‐dimensional integral imaging. We present experimental results to test and verify the performance of our method computationally.     

Synthesis and properties of polystyrene/graphite nanocomposites

In this paper, graphite/polystyrene nanocomposite is synthesized by in situ polymerization of styrene in a tetrahydrofuran (THF) solution system of potassium (K)-THF-graphite intercalation compound (GIC). K-THF-GIC has proved to initiate polymerization of styrene by the anionic mechanism. Due to the interfacial interaction between the graphite nanolayers and the polymer, the composites exhibit higher glass transition temperature and higher thermal stability when compared to polystyrene. The percolation threshold in the conductivity of the composites is lesser than 8.2 wt% and the dielectric constant can reach as high as 136.     

薄管板换热器的设计及薄管板计算的探讨

结合化肥厂丁辛醇装置薄管板换热器的设计 ,着重分析薄管板的特点 ,应用合理的计算方法对薄管板进行强度校核 ,验证这一新型换热器的安全性和经济实用性     

固体润滑涂层的评价和使用

本文主要介绍了二硫化钼，石墨、聚四氟乙烯三种固体润滑涂层的特点以及润滑涂层摩擦磨损性能的评价手段和方法，以及台架试验和应用实例，提出了选用方法和步骤。     

Influence of pencil lead hardness on voltammetric response of graphite reinforcement carbon electrodes

This work studied the voltammetric response of graphite reinforcement electrodes made of different pencil lead hardness. The studies showed that harder graphite leads, regardless of their manufacturer, are more appropriate as electrode material for voltammetric purposes due to their higher peak currents, increasing sensitivity and reproducibility, with ΔEp closer to the theoretical value for a reversible system.     

Dissociative adsorption of small molecules at vacancies on the graphite (0 0 0 1) surface

The adsorption of molecular and atomic hydrogen as well as other molecules in the atmosphere on vacancies in the (0 0 0 1) graphite surface are investigated using density functional theory. Atomic hydrogen adsorbs with energies ranging from 4.7 to 2.3 eV. The validity of the model is confirmed by the good agreement between calculated vibrational spectra and those of high-resolution electron energy loss spectroscopy. It is shown that molecular hydrogen dissociates with a barrier of 1.1 eV on this model system. Water and oxygen also dissociate with respective barriers of 1.6 and 0.2 eV. Carbon dioxide and nitrogen have no interaction with the defect whereas carbon monoxide is incorporated into the vacancy with an activation energy of 1.5 eV. A comparison is made with the reactivity of graphene edges, both zigzag and armchair.     

A Simple Quasi-2D Numerical Model of a Thermogage Furnace

A simple quasi-2D model for the temperature distribution in a graphite tube furnace is presented. The model is used to estimate the temperature gradients in the furnace at temperatures above which contact sensors can be used, and to assist in the redesign of the furnace heater element to improve the temperature gradients. The Thermogage graphite tube furnace is commonly used in many NMIs as a blackbody source for radiation thermometer calibration and as a spectral irradiance standard. Although the design is robust, easy to operate and can change temperature rapidly, it is limited by its effective emissivity of typically 99.5–99.8%. At NMIA, the temperature gradient along the tube is assessed using thermocouples up to about 1,500°C, and the blackbody emissivity is calculated from this. However, at higher operating temperatures (up to 2,900°C), it is impractical to measure the gradient, and we propose to numerically model the temperature distributions used to calculate emissivity. In another paper at this conference, the model is used to design an optimized heater tube with improved temperature gradients. In the model presented here, the 2-D temperature distribution is simplified to separate the axial and radial temperature distributions within the heater tube and the surrounding insulation. Literature data for the temperature dependence of the electrical and thermal conductivities of the graphite tube were coupled to models for the thermal conductivity of the felt insulation, particularly including the effects of allowing for a gas mixture in the insulation. Experimental measurements of the temperature profile up to 1,500°C and radial heat fluxes up to 2,200°C were compared to the theoretical predictions of the model and good agreement was obtained.     

不平坦的三角洲前缘席状砂--来自露头和地下的证据

延长剖面发育的三叠系延长统三角洲前缘席状砂．平面上呈席状，垂向上表现为砂泥岩互层，剖面上可见不同规模的水下分流河道砂岩透镜体。大庆油田三角洲前缘席状砂解剖发现．即使在外前缘相带．席状砂仍然具明显的水道特征。由于湖盆三角洲受波浪和潮汐的作用较小，受河漉作用较强，分流河道向前延伸直至三角洲的前端，貌似平坦的席状砂前缘实际上分布着大大小小的分流河道，河道的迁移就形成了由多个宽厚比极大的对称或不对称的透镜状单元叠加而成的三角洲前缘席状砂。三角洲前缘席状砂的建筑结构分析表明，貌似平坦简单的席状砂实际上是一个复杂的非均质体．储层物性的非均质变化受砂体建筑结构的控制具有明显的层次性规律。     

焦粉四辊破碎机高硬度辊皮切削的新工艺

分析了高硬度辊皮的磨损情况；改进了辊皮的切削方案；满足了生产需求并提高了作业率。     

Multiwalled Nanotubes: Their Formation by Irradiating Graphite with High Doses of Electrons

We report the production of carbon nanotubes by high dose of electron irradiation. The irradiation was performed with a 2 MeV Van de Graaff accelerator, while the irradiation conditions were the following: voltage 1.3 MeV, current 5 µA, dose rate 25 kGy/min, and total dosage 1000 kGy. The samples were analyzed in a high-resolution transmission electron microscope. The main features observed on the samples, were huge nanotubes of several nanometer long and few nanometer wide, which are capped at one end. It is good to point out, that at this level of irradiation, we were not able to find either onion-like or particle structures throughout the material, as it is usual in similar hexagonal structures. This behavior could be attributed to the level of irradiation used to create the nanotubes under investigation.