减振器在自导系统结构设计中的应用

通过对减振器结构设计的理论分析，建立了减振器的数学模型，同时通过设计的模拟装置对减振效果进行了实测，效果良好。     

垂直管吸收器内泡式吸收过程的数值研究

建立垂直管吸收器管内泡式吸收过程中传热传质的数学物理模型，对其泡式吸收过程进行数值研究，获得泡式吸收方式的一些传热传质特性，为吸收器的优化设计提供一定理论指导。     

有限周期梁用动力消振器抑振的特性

本文用弯曲波方法导出了多支承梁加动力消振器位移响应的普遍表达式。理论分析发现了周期结构用动力消振器抑制振动的一些新特性：（１）仅用一个动力消振器可抑制周期结构对应传递频带内的一组共振峰。被抑制的共振峰的数量与跨距的数量和消振器的布置位置有关；（２）动力消振器调谐频率与对应传递频带的第一个共振频率相关联。当动力消振器与作用在梁上的外载荷作用在同一点时，最佳调谐频率比总是大于１，否则最佳调谐频率比小于１。     

利用高酸值餐饮废油脂制备生物柴油

以高酸值餐饮废油脂为原料,在酯化反应后再经两步酯交换反应制备生物柴油。在酯化反应中添加吸水剂可降低油脂的酸值,经一次酯化反应即可将油脂的酸值降至2m g/g左右,满足酯交换反应的要求。考察了酯化反应中吸水剂的添加方式、种类及其用量对酯化反应的影响,以及酯交换催化剂的种类及用量对脂肪酸甲酯(FAME)收率和产物组成的影响。实验结果表明,以凹凸棒土为吸水剂(用量为餐饮废油脂中游离脂肪酸质量的3%),且在酯化反应30m in时加入,酯化效果较好;以质量比为1∶1的NaOH和KOH混合物为催化剂进行两步酯交换反应时,催化剂的最佳用量依次为1.00%和0.75%(质量分数,基于油脂的质量),FAME收率最高达到96.33%。     

An Investigation of Vibration Reducing on a Machine Tool

In order to reduce the vibration on a machine tool, more orthogonal experiment schemes have been designed, which are based on the steel balls vibration reducing principle. After experiments the optimal reducing vibration scheme was determined. This kind of vibration reducing scheme is used in steel balls vibration absorber, which can be used to reduce vibration magnitudes of a machine tools under the working conditions, whereby improving machining precision. The suggested experiment method is of useful reference in reducing vibrations on other machine tools too.     

自调Q掺饵光纤激光器

研制出一种结构新颖的掺饵光纤激光器，该激光器利用线性光纤环形镜和半导体激光器芯片的背向反射镜组成谐振腔。采用半导体激光器芯片作为饱和吸收体，在９ｍＷ的泵浦功率下，该激光器实现了自调Ｑ脉冲输出。输出光脉冲宽度为１２μｓ，脉冲峰值功率约为２２ｍＷ，脉冲序列的重复周期约为６５μｓ。     

Effects of Heat Treatment Temperature and Time on Structure and Static Magnetic Property of W-type Ferrite Hollow Mierospheres

Hollow spheres of hexagonal ferrite BaCozFelrO27 were fabricated through a spray pyrolysis technique using co-precipitation ferrite powder precursor as materials, followed by calcinations in an air atmosphere. The phase composition, micro-morphology, and static magnetic property of the particles were measured by XRD, SEM, and VSM. The results indicate that the method for preparation of ferrite hollow microspheres （FHM） results in a broad particles size distribution. The density of FHM decreased from 5.31 g/ cm^3 to 2.31 g/cm^3. When the heating rate was 5℃/min, and temperature was 1 200℃ for 4 hours, pure W-type ferrites were formed. With the heat treatment temperature and time increasing, the crystal structure becomes perfect, the saturation magnetization is increased and the coercive force is decreased.     

液态挤压在铝合金减震筒上的应用：液态挤压比压值对制件性能影响的分析

指出了压力铸造及热挤压工艺生产铝合金减震筒的缺点，阐述了液态挤压的特征，介绍了液态挤压在减震筒上的应用，分析了比压值对制件性能的影响。     

Design and application of functional absorbers

This paper gives an overview of the research at Institute of Acoustics, Tongji University, on functional absorbers and experience acquired in practical applications over the past three decades. Experiments and analysis of the absorption characteristics of three different geometrical forms of functional absorbers, i.e., panels, cubes and tubes, were conducted with different arrangements. The resulting esthetical effects are illustrated with pictures. Several non-fiber materials are used to compose functional absorbers with advantages both in acoustic properties and in architectural features. Cost effectiveness analysis is also given in order to provide design guidelines.     

一种新型谐振腔增强型光调制器结构的研究

提出了一种新型谐振腔增强型(RCE)光调制器结构,它由一个对称型谐振腔增强型光调制器和一个高反镜所构成.利用传输矩阵法对该器件的插入损耗及临界吸收厚度进行了模拟分析,并同传统谐振腔增强型光调制器的相关性能进行了比较.分析结果表明,这种结构解决了传统谐振腔增强型光调制器的临界吸收厚度与插入损耗之间相互制约的矛盾,可同时获得低临界吸收厚度和低插入损耗.