原料对石脑油加氢催化剂性能的影响

对石脑油加氢处理产品硫、氮含量严重超标现象进行了研究 ,重点探讨了原料性质对催化剂活性的影响。研究表明 :直馏石脑油中高硫、氮含量蜡质混合物组分会引起NHT催化剂中毒 ,造成催化剂失活 ,此时通过提高反应温度和压力及降低空速对硫、氮的脱除效果影响不大 ,只有限制这种高硫、氮含量蜡质混合物进入装置 ,才能保证装置产品质量合格     

Life cycle of hydroprocessing catalysts and total catalyst management

Hydroprocessing catalysts based on Ni, Co, Mo and W are used in various refinery processing applications where several deactivation mechanisms become of importance (coke formation, active phase sintering, metals deposition, poisoning) in the catalyst's life cycle. The life cycle of commercial hydroprocessing catalysts is very complex and includes the catalyst production, sulfidation, use, oxidative regeneration followed by re-sulfidation and reuse or, if reuse is not possible, recycling or disposal. To understand the changes in catalyst properties taking place during a life cycle, the catalyst quality in the different stages can be best monitored by using advanced analytical techniques. The catalyst's life cycle is further complicated by numerous technical, environmental and organizational issues involved. In principle, different companies can be involved in each of the life cycle steps. Leading catalyst manufacturers, together with specialized firms, offer refineries a total catalyst management concept, starting with the purchase of the fresh catalyst and ending with its final recycling or disposal. Total catalyst management includes a broad range of services, ensuring optimal timing during the change-out process, reliable, smooth and safe operations, minimal downtime and maximum catalyst and unit performance.     

Development of catalysts for hydrogen generation from hydride compounds

Catalytic hydrolysis of NaBH₄ and NH₃BH₃ has been studied. It was shown that the nature of the support and the active component of the catalyst affect the H₂ generation rate. Despite similar sizes of rhodium particles formed on the surface of different supports (γ-Al₂O₃, TiO₂, carbon), their reactivity is different. Rh/TiO₂ with low rhodium concentration (1 wt.%) is the most active catalyst both in the hydrolysis of NaBH₄ and NH₃BH₃. The obtained results show that the rhodium chloride interaction with titania determines the reactivity of rhodium particles formed under action of NaBH₄ medium. TEM, DRS UV–vis and XPS were used to characterize the catalysts.     

煤系高岭土制备裂化催化剂的探索性研究

从石嘴山煤系高岭土的分析测实,经过改性处理,实验后得出具有碱改性条件,且制备裂化催化剂后重油转化能力有明显提高,开拓了煤系高岭土在石化领域的应用。     

Selective catalytic reduction of nitric oxide by propane over vanadia-titania aerogels

An investigation has been carried out of the effect of vanadia loading on the activity and selectivity ofV₂O₅TiO₂ aerogel catalysts, prepared by a two-step procedure, for the reduction of NO by propane. The structure of catalysts have been characterized by laser Raman spectroscopy and XRD measurements. At vanadia loading levels below ca. 4.4 wt%, the vanadia is present in the form of coordinated polymeric species, whereas crystallites of V₂O₅ are formed at higher vanadia contents. At this critical level of 4.4 wt% V₂O₅, the kinetic measurements showed also a maximum in the activity per mass of catalyst which very likely indicated that the coordinated polymeric surface species are more active than crystalline V₂O₅. The selectivity towards the formation of dinitrogen decreased as the loading increased, presumably because of the formation of larger polymeric species and V₂O₅ crystallites, below and above the critical loading level, respectively. For the reduction of NO by propane, titania supported vanadia aerogel catalysts are significantly more active, per mass of catalyst, and more selective towards N₂ formation than conventionalV₂O₅TiO₂ and V₂O₅Al₂O₃ aerogel catalysts, at vanadia loading levels below ca. 11 wt%.     

连续重整再生器试运故障的排除

利用引进专利技术设计、制造、安装的连续重整装置的再生器具有内件复杂和安装精度高的特点，其安装检验和气密试验通过后，在催化剂流动循环试运行时出现了催化剂跑漏、压力降升高的故障。经过中外专家通力合作，在反应系统不停车的情况下，及时排除了故障，保证了催化重整装置一次试车投产成功。     

Effect of carbon black composite (CBC) support properties on hydrodesulfurization performance of sulfided Mo and Co, and carburized Mo, catalysts

Carbon black composites (CBCs) have been prepared by pyrolyzing mixture of a carbon black with polyfurfuryl alcohol and then pretreated by oxidation with nitric acid, gasification with water steam or ammoxidation. The effects of the chemical character of the carrier surface, nature of the active metal phase and pH value of the impregnation solution on the catalytic activity towards the hydrodesulfurization (HDS) of thiophene of the CBC supported Mo (Co) catalysts were determined. It was stated that the catalytic properties of the CBC supported sulfides of Mo or Co and of Mo carbides are affected by the chemical character of the carrier surface. Generally, catalysts supported over basic surface CBC exhibit higher activity than those ones supported over CBC possessing acidic surface character. Co catalysts supported on acidic surface show lower activity (per mol of active metal) than Mo based ones supported on the same carrier. In the case of catalysts supported on basic CBC, Co exhibits distinctly higher activity than Mo. At the experimental conditions adopted for this study, CBC surface properties, active phase nature, and catalyst impregnation pH were found to exert a relatively small influence on both HDS and hydrogenation activities.     

Hydrodechlorination of 3-chloropyridine and chlorobenzene in methanol solution over alkali-modified zirconia-supported palladium catalysts

The liquid-phase hydrodechlorination of 3-chloropyridine and chlorobenzene has been studied over alkali-modified zirconia-supported palladium catalysts. The modification of the ZrO₂ with alkali metal carbonates improves the catalytic activity of the final palladium catalyst. Therefore, the larger the ionic radii (Li⁺ < Na⁺ < K⁺), the greater the catalytic activity (TOF) of the palladium catalyst. For 3-chloropyridine, hydrodechlorination proceeds without catalyst deactivation. This is explained as the result of the interaction of reaction products (pyridine and HCl) forming pyridinium chloride, thus avoiding the detrimental effect of HCl on the palladium particles. Catalytic hydrodechlorination of chlorobenzene over Pd catalysts exhibits an initial catalytic activity (TOF) much lower than that of 3-chloropyridine and the Pd catalysts deactivate as the reaction proceeds. Finally, chlorobenzene hydrodehalogenation has also been carried out in the presence of an equimolecular amount of pyridine resulting in a decrease in the initial reaction rate on the one hand, but also in an increase in final conversion on the other.     

Kinetics of catalyzed and non-catalyzed oxidation of soot from a diesel engine

To comply with the new regulations on particulate matter, car manufacturers more and more commonly use diesel particulate filters (DPF). The working of these systems needs to periodically burn soot that has been accumulated during the loading of the DPF. This paper describes the kinetics of the non-catalytic and catalytic oxidation of real diesel soot with oxygen. From these experiments, mechanisms for catalyzed and non-catalyzed soot oxidation have been proposed.     

Design consideration of photocatalytic oxidation reactors using TiO2-coated foam nickels for degrading indoor gaseous formaldehyde

In the design process of the photocatalytic oxidation (PCO) reactor using TiO₂-coated foam nickels, the optimum of catalyst film thickness, light intensity and flow velocity were considered. A model was developed to study the effect of catalyst film thickness on photocatalytic degradation of formaldehyde by a TiO₂-coated foam nickel at continuous flow mode. In this model, external mass transfer and internal molecule diffusion-reaction were considered. A first-order kinetics equation was used to account for the photocatalytic reaction. Two exponential equations were employed to describe the distribution of light intensities in foam nickels and catalyst films, respectively. Validated with experimental data, the model can be used to predict the optimal thickness of catalyst films. A method for determining appropriate light intensities was proposed and discussed. The appropriate light intensity can be obtained by giving a margin, regarded as an excess coefficient, to the light intensity calculated based on the assumption of complete use of excited electron–hole pairs. The excess coefficient needs to be determined experimentally. In addition, the optimal flow velocity of PCO reactors could be consistent with the required one by changing the windward area of foam nickels. Based on the theoretical analyses, a novel PCO reactor containing 15 parallel-connected cells was designed. Each reaction cell was composed of an UV lamp and a TiO₂-coated tubular foam nickel. The performance of the reactor was tested by degrading gaseous formaldehyde at an indoor concentration level. The results showed that the reactor had low pressure loss and good degradation capability.