一种基于PWM的半桥型开关电源

主要介绍了由SG3525组成的半桥型开关稳压电路的结构和工作原理，阐述了PWN集成电路SG3525的特性和主要功能。实践表明：该系统工作稳定，运行效果良好。     

基于IGBT的PWM大功率直流伺服驱动

本文介绍ＩＧＢＴ、ＥＸＢ８４１和ＬＥＭ模块在大功率ＰＷＭ直流伺服驱动系统中的应用和系统抗干扰设计。使用效果表明，基于ＩＧＢＴ的设计，可提高大功率直流伺服系统的可靠性和性能、减小体积、降低成本。     

专用超大规模集成电路在LED显示系统中的应用

自1976年蒙特利尔奥运会采用了第一块黑白视频显示屏以来，各种大屏幕特别是LED显示屏得到了迅猛发展，在现代信息社会中更是随处可见。在这些显示系统中，应用了大量的不同种类的集成电路作为驱动芯片。本文叙述了运用于LED显示系统中的超大规模集成电路的强大功能。     

LM2717型双降压直流/直流变换器的原理及其应用设计

LM2717是美国国家半导体公司推出的一款全新的高性能变换器,内含两个脉宽调制(PWM)直流/直流转换器,功能强大.介绍了该器件的主要参数、工作原理和引脚功能,讨论利用LM2717进行应用设计时选择外部器件的原则及设计中应注意的问题.     

随动系统数字化改装中PWM系统的研究

描述了一个随动系统数字化改装中 PWM系统的研究 ,并给出了计算机辅助分析的程序流程图 ,为类似装备的数字化改造提供了有效的参考     

外焊缝自动跟踪系统

介绍了外焊缝自动跟踪系统的组成及工作原理，简述了传动部分ＧＴＲ－ＰＷＭ调速系统，给出了系统的硬件电路。该跟踪器具有结构简单，体积小，性能稳定等特点，在生产线上获得了成功的应用。     

线性功放在安规测试设备中的应用

通过对自耦变压器型、智能PWM型、线性功放型等三类安规测试仪器测试原理的分析 ,给出了三类仪器的最终输出波形 ,对三类仪器的优缺点作了较全面的对比 ,指出了线性功放在安规测试仪器中的应用符合安规测试仪器自动化智能化发展的需求 ,适应安规测试业规范化的要求。     

一种新型半桥不对称PW M控制变换器

介绍了一种适用于DC／DC半桥变换的不对称PWM控制方案，分析了电路的工作原理，给出了150W变换器的仿真波形和实验结论，结果表明，该控制方案能在恒定开关频率下对变换器实现高效率的软开关控制。     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014