Improving the luminescence properties and powder morphologies of red-emitting Sr0.8Ca0.19AlSiN3:0.01Eu2+ phosphors for high CRIs white LEDs by adding fluxes

Red-emitting Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ phosphor with halide fluxes for use in the production of white light-emitting diodes (white LEDs) with high-colour rendering indices (CRIs) was prepared through the high-temperature solid-state method. Fluoride (NaF, SrF₂, BaF₂, CaF₂, AlF₃·3H₂O and CeF₃), chloride (NH₄Cl, BaCl₂, MgCl₂, NaCl and LiCl) and composite fluxes (NaF + SrF₂, SrF₂+NH₄Cl and NaF + NH₄Cl) were applied in the phosphors. NaF, SrF₂, NH₄Cl and NaF + SrF₂ fluxes had prominent effects on the characteristics of Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ phosphors. Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ phosphors with various powder morphologies can be obtained through the addition of fluxes, which are conducive for phosphor formation. The powder morphologies of phosphors incorporated with NaF + SrF₂ were preferable to those of powders incorporated with other fluxes. This result indicated that the incorporation of NaF + SrF₂ into Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ yielded phosphors with high luminescent intensity and quantum efficiency, excellent thermal stability, narrow full widths at half-maximum (FWHM, 75.2 nm), uniform rod-like morphologies with large particle sizes (D₅₀ = 16.99 μm) and good particle dispersion. White LEDs with high CRIs were obtained by combining prepared phosphors (NaF + SrF₂ additive) with the commercial green-emitting phosphors Y₃(Al,Ga)₅O₁₂:Ce³⁺ and (Sr,Ba)₂SiO₄:Eu²⁺. White LEDs with Y₃(Al,Ga)₅O₁₂:Ce³⁺ and (Sr,Ba)₂SiO₄:Eu²⁺ phosphors had correlated colour temperatures (CCTs) of 3064 and 3023 K, respectively, and CRIs of 81.8 and 92.4, respectively. Therefore, NaF + SrF₂ can be used as a favourable flux for the production of Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺.     

Morphological description of the immature stages of Hermetia illucens (Linnaeus, 1758) (Diptera: Stratiomyidae)

In the dipteran genus Hermetia, only 6 of the 78 valid species have documented immature stages: H. albitarsis Fabricius, 1805, H. aurata Bellardi, 1859, H. concinna Williston, 1900, H. illucens (Linnaeus, 1758), H. panamensis Greene, 1940 and H. pulchra Weidemann, 1830. In particular, H. illucens stands out due to its reported applicability for forensic, medical and economic purposes. Here, we described the morphology of eggs and immature stages of this species, with a view to detecting differences between instars and in the pupal stage, which should eventually help properly identifying larval age. We utilized both optical and scanning electron microscopy tools. The eggs are elliptical and elongated, and color varies from cream white to yellowish. The larvae are apodal, hemichephalic and holopneustic, flattened dorso‐ventrally and may be recognized by the head elongated, dorsal and ventral chaetotaxy of the cephalic capsule, thoracic and abdominal segments, and the morphology of the anterior and posterior spiracles. The pupae are adecticous and coarctate, tegument dark brown and pruinescence varying from brown to golden. The overall morphology across instars is similar, but marked variations were observed in the shape of the antennal articuli and the shape of the setae (first instar compared to the others). Our results supplement the biological information on Hermetia illucens and should aid the proper identification and aging of juveniles in the field, as a way to minimize errors in the calculation of the post‐mortem interval.     

Template-assisted spray-drying method for the fabrication of porous particles with tunable structures

Developing strategies for the production of porous particles with controllable structures using a spray-drying method has attracted attention of researchers for decades. Although many papers have reported their successful production of porous particles using this method, information on how to create and control the porous structures as well as what parameters involving and what formation mechanism occurring during the synthesis process are still not clear. To meet these demands, the present review covers strategies in the spray-drying developments for the fabrication of porous particles with controllable structure. This information is important for optimizing the production of porous particles with desirable properties. Regulation of process conditions and precursor formulations are also explained, including composition, type, and physicochemical properties of droplet and raw components used (i.e., host component, template, and solvent). The electrostatic interactions between the individual components and the droplets are also presented, while this information tends to be neglected in the conventional spray-drying process. To clarify how the porous particles are designed, current experimental results completed with illustrations for the proposal particle formation mechanism are presented. The review also completed with the opportunities and potential roles of the changing porous structures in practical uses. This review would provide information on how to produce porous particles that can be used for advanced functional materials, such as catalysts, adsorbents, and sensors.     

Revamping SiO2 Spheres by Core–Shell Porosity Endowment to Construct a Mazelike Nanoreactor for Enhanced Catalysis in CO2 Hydrogenation to Methanol

Beyond the catalytic activity of nanocatalysts, the support with architectural design and explicit boundary could also promote the overall performance through improving the diffusion process, highlighting additional support for the morphology-dependent activity. To delineate this, herein, a novel mazelike-reactor framework, namely multi-voids mesoporous silica sphere (MVmSiO₂), is carved through a top-down approach by endowing core-shell porosity premade Stöber SiO₂ spheres. The precisely-engineered MVmSiO₂ with peripheral one-dimensional pores in the shell and interconnecting compartmented voids in the core region is simulated to prove combined hierarchical and structural superiority over its analogous counterparts. Supported with CuZn-based alloys, mazelike MVmSiO₂ nanoreactor experimentally demonstrated its expected workability in model gas-phase CO₂ hydrogenation reaction where enhanced CO₂ activity, good methanol yield, and more importantly, a prolonged stable performance are realized. While tuning the nanoreactor composition besides morphology optimization could further increase the catalytic performance, it is accentuated that the morphological architecture of support further boosts the reaction performance apart from comprehensive compositional optimization. In addition to the found morphological restraints and size-confinement effects imposed by MVmSiO₂, active sites of catalysts are also investigated by exploring the size difference of the confined CuZn alloy nanoparticles in CO₂ hydrogenation employing both in-situ experimental characterizations and density functional theory calculations.     

Corrosion behaviors of carbon steel induced by life activities of Phaeodactylum tricornutum in a marine environment

Microbiologically influenced corrosion induced by bacteria has been studied for many years. Corrosion is known to be sensitive to the presence of microalgae, such as Phaeodactylum tricornutum. However, the life activity of P. tricornutum that influences the general and localized corrosion of carbon steel is not fully understood. The current study uses a combination of immersion tests and electrochemical experiments with a detailed surface characterization to reveal the naturally formed corrosion products with/without the presence of P. tricornutum. The results show that samples suffer from pitting corrosion and the averaged pit depths are approximately 15 μm under a light–dark cycle condition or a 24-h constant light condition. Meanwhile, the corrosion products are mainly comprised of γ-FeOOH and Fe₃O₄ in a constant light condition. However, γ-FeOOH, Fe₃O₄, and FeCO₃ are found in a light–dark cycle. This study proposes the fundamental mechanisms of the effect of P. tricornutum life activities on the corrosion performance of Q235 carbon steel, to fulfill the knowledge gaps of the presence of microalgae inducing the general and pitting corrosion of carbon steel.     

The overall crystallization behavior of polyethylene/wax blends as phase change materials for thermal energy storage: A mini review

This review paper deals with the overall crystallization behavior of polyethylene/wax blends as phase change materials (PCMs) for thermal energy storage with the determination of their thermal properties. The addition of molten wax to the polyethylenes decreases the crystallization and melting temperatures of the blends. However, incorporating fillers to the polyethylene/wax blends can either decrease or increase the crystallization and melting temperatures of the composites depending on the filler type. The normalized enthalpy values of linear low-density polyethylene showed no significant change when increasing the wax content. On the contrary, the normalized enthalpy values of the wax in the blends were lesser than that of pure wax and increased with increasing wax content. Since the wax in the blend had a lower crystallinity compared to pure wax, this influences its effectiveness as a PCM for thermal energy storage. The effect of different polyethylenes on the wax morphology gave rise to enhance phase separation when wax was blended to high-density polyethylene as compared to the other polyethylenes. On the contrary, the effect of various waxes on the morphology of polyethylene resulted in different morphologies due to the molecular weight of the wax used and the structure of the polyethylene chain. The addition of fillers to the polyethylene (PE)/wax samples resulted in enhanced phase separation. The overall isothermal crystallization rate and the equilibrium melting temperature of PEs in the PEs/wax blends were depressed by wax addition due to the wax dilution effect.     

Formation mechanism of porous reaction-bonded silicon nitride with interconnected pores in the presence of MgO

In porous reaction bonded silicon nitride, whiskers normally grow in globular clusters as the dominant morphology and deteriorate the pore interconnectivity. However, the ceramic microstructure was significantly transformed with the addition of MgO; specifically, the morphology was modified to a combination of matte and hexagonal grains. Microstructural observation along with thermodynamic studies suggest that MgO interfered with the presence and nitridation of SiO_(g). Consequently, rather than being involved in the whiskers’ formation, surface silica instead reacted with volatile MgO to form intermediate products. Through these reactions, whisker formation was blocked, and a porous interconnected structure formed which was confirmed by 3D tomography. After heat-treatment at 1700 °C, β-Si₃N₄ crystallized in a glassy matrix containing magnesium. Resulting samples had an open-pore structure with porosity of 74–84 vol. %, and density of 0.48-0.75 g.cm^?3. Combination of high porosity and pore size of <40 μm led to compressive strengths of 1.1–1.6 MPa.     

超厚板TC4钛合金电子束焊接接头应力腐蚀敏感性

针对100 mm超厚板TC4钛合金电子束焊接接头，采用慢应变速率拉伸方法评价接头在人造海水中的应力腐蚀敏感性，分析接头的显微组织和断口形貌，对接头的腐蚀机制进行研究. 结果表明，室温条件下应变速率为ε=1×10-6 s-1时，母材在海水中未表现出应力腐蚀敏感性；焊缝上部、中部和下部具有轻微应力腐蚀敏感性. 焊缝在海水中发生阳极溶解，产生氢吸附，导致裂纹的萌生. 同时氢扩散诱导α'相界及α'相内发生位错塞积，进而使裂纹在更低的应力水平下发生扩展.     

Effect of the annealing procedure and the molecular weight on the crystalline phase morphology and thermal properties of polylactide

The thermomechanical properties of poly(lactide) (PLA) are strongly related to its semicrystalline microstructure and morphology. Thermal annealing is a strategy to improve the crystallinity of PLA. However, the different techniques and specimen types needed for each kind of characterization could lead to misleading conclusions. In this work, annealed samples of three PLA grades with different molecular weights were studied by DSC, wide angle X‐ray scattering and polarized optical microscopy (POM) and the results are related to their thermomechanical and impact properties. Special focus is put on the POM results obtained by different approaches and the suitability of each of them to be related to the thermomechanical properties. By annealing medium molecular weight PLA specimens at 140 °C an important increase of the heat distortion temperature was obtained, which was not related to the spherulite size but to the combination of high crystallinity degree together with high α/α′ crystal type ratio. However, the impact properties of annealed PLA decreased with increase in the annealing temperature according to an increment in crystallinity and in the α/α′ crystal ratio. © 2019 Society of Chemical Industry