Behavior of ZrO2-C Refractories in Thin-strip Casting of Steel

Zirconia graphite refractory is used as a core-nozzle in the thin-strip casting of steel. Post-mortem analysis of used refractory was performed in an effort to establish the failure mechanism. Corrosion behavior was studied against molten steel with Mn O- SiO 2based liquid inclusions. Corrosion of these materials involves dissolution and oxidation of graphite in the matrix followed by penetration of liquid slag leading to degradation of ZrO 2particles. Thermodynamic equilibrium calculations were performed to study this corrosion mechanism.     

Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

Applying reticular synthesis to the design of Cu-based MOFs with mechanically interlocked linkers

The concept of“robust dynamics”describes the incorporation of mechanically interlocked molecules(MIMs)into metal-organic framework(MOF)materials such that large amplitude motions(e.g.,rotation or translation of a macrocycle)can occur inside the free volume pore of the MOF.To aid in the preparation of such materials,reticular synthesis was used herein to design rigid molecular building blocks with predetermined ordered structures starting from the well-known MOF NOTT-101.New linkers were synthesized that have a T-shape,based on a triphenylene tetra-carboxylate strut,and their incorporation into Cu(II)-based MOFs was investigated.The single-crystal structures of three new MOFs,UWCM-12(fof),β-UWCM-13(loz),UWCM-14(lil),with naked T-shaped linkers were determined;β-UWCM-13 is the first reported example of the loz topology.A fourth MOF,UWDM-14(lil)is analogous to UWCM-14(lil)but contains a[2]rotaxane linker.Variable-temperature,²H solid-state NMR was used to probe the dynamics of a 24-membered macrocycle threaded onto the MOF skeleton.     

基于个体协同触发强化学习的多机器人行为决策方法* .txt

摘要：为了提高多机器人行为最优决策控制中强化学习的效率和收敛速度，研究了多机器人的分布式马尔科夫建模与控制策略。根据机器人有限感知能力设计了个体 协同感知触发函数，机器人个体从环境观测结果计算个体 协同触发响应概率，定义一次触发过程后开始计算联合策略，减少机器人间通讯量和计算资源。引入双学习率改进Q学习算法，并将该算法应用于机器人行为决策。仿真实验结果表明，当机器人群组数量在20左右时，本文算法的协同效率较高，单位时步比为1085 0。同时距离调节参数η对机器人协同搜索效率有影响，当η=0008时，所需的移动时步比和平均移动距离都能达到最小值。通过双学习率的引入，该算法较基于环境模型的强化学习算法具有更高的学习效率和适用性，平均性能提升35%，对于提高多机器人自主协同能力具有较高的理论意义及应用价值。 .txt     

Erratum to: Suspended superconducting weak links from aerosol-synthesized single-walled carbon nanotubes

Erratum to Nano Research 2020,13(12):3433-3438 https://doi.org/101007/s12274-020-3032-1 The article“Suspended superconducting weak links from aerosol-synthesized single-walled carbon nanotubes"written by Jukka-Pekka Kaikkonen1(■),Abhilash Thanniyil Sebastian3,Patrik Laiho3,Nan Wei3,Marco Will-2,Yongping Liao3,Esko I.Kauppinen3,and Pertti J.Hakonen1,2(■),was originally published Online First without Open Access.     

Critical parameters near the ferromagnetic-paramagnetic phase transition in La0.67–xYxBa0.23Ca0.1MnO3 compounds（x=0.10 and x=0.15）

The critical properties of the mixed manganite La0.67–x Y x Ba0.23Ca0.1Mn O3 with x=0.10 and x=0.15 around the paramagnetic(PM)-ferromagnetic(FM) phase transition were investigated through various techniques. These involved modified Arrott plots, Kouvel-Fisher method and Widom scaling relation. Magnetic data, analyzed in the critical region, using the above methods, yielded the critical exponents for(x=0.10) La0.57Y0.10Ba0.23Ca0.1Mn O3(β=0.312±0.002 and γ=1.147±0.003 at T C=299.23±0.05 K). Moreover, the estimated critical exponents of(x=0.15) La0.52Y0.15Ba0.23Ca0.1Mn O3 were β=0.286±0.004 and γ=0.943±0.002 at T C=289.53±0.06 K. The critical exponents’ values were close to the theoretical values of 3D-Ising model and tricritical mean-field model. These results suggested that the present composition should be close to a tricritical point in the La0.67–x Y x Ba0.23Ca0.1Mn O3 phase diagram. Expressing the field dependence as ΔS M∝H n allowed us to establish a relationship between the exponent n and the critical exponents of the material and to propose a phenomenological universal curve for the field dependence of ΔS M.     

低温氮、磁化综合处理钻头使用性能提高的X射线和电子显微技术分析研究

在地质钻探和石油钻井中,钻头都是非常重要的钻进工具。其技术特性,特别是硬度和耐磨性与钻探的技术经济指标,即与机械钻速、钻头进尺和每米钻探成本直接相关。为了提高钻头的工作性能,俄罗斯南方国立技术大学提出了综合低温淬火、磁化回火处理钻头的方法。经过综合处理后,钻头体、复合片底座和钎焊层的硬度分别提高了30%、3%和22%。野外钻进试验结果表明,经过低温液态氮和磁化综合处理的与未经综合处理的钻头相比,每次试验钻头进尺都有提高,总体上钻头进尺提高了22.2%,取得了很好的钻进效果。并对取得的效果进行了X射线和显微技术分析。     

提高水电站的自动化水平

为了评估6座水电站的自动化、人员编制和责任,美国陆军工程师团委托的可行性研究更多地考虑了成本和效益。     

Optical Properties of One-dimensional Three-component Photonic Band Gap Structure

1　IntroductionMaterialswithPhotonicBandGaps (PBG’s)havebeenwidelystudiedboththeoreticallyandex perimentallyinthepastfew years[1～ 4] .Theexis tenceofgaps,which prohibitthepropagationofelectromagnetic (EM )wavesinacertainrangeoffrequencies,canhavesignificantimpactsbothinsci enceandtechnology .Manypracticalapplicationsofthesestructureshavebeensuggestedanddemon strated ,suchasPhotonicCrystal (PC)microcavi ties[5] ,infraredPC[6] ,PClens[7] ,suppressingspontaneousemission ,manipulatinglight…