聚酰胺的改性与加工应用

本文介绍了有关尼龙树脂材料改性，共聚和新品种尼龙等聚合物设计技术，聚合物合金等复合技术，以DSI等胶粘技术为中心的相关加工技术的动向和具体事例。     

桐油聚酰胺——酰亚胺结构与性能的研究

本文采用红外光谱分析，元素分析、X-射线衍射，差示扫描量热分析（DSC）、热重分析（TG）等测试技术。研究了不同温度下缩聚产物的结构与性能，结果表明，高温溶液缩聚反应得到的产物。分子量高，溶解性好，耐热性高。     

聚酰胺帘子线发展动态

介绍了国内外聚酰胺帘线发展动态,指出中国随着公路交通的发展,聚酰胺帘线在20世纪内仍将发展并继续居于车用帘线的首位.同时指出,目前行业效益在下降,随着国内行业企业集团的组成和国外企业的进入,市场竞争将更为剧烈.     

阻燃尼龙66的开发和应用

一、概述为了拓宽尼龙工程塑料的应用领域,提高尼龙的耐燃等级以满足电子工业较高的安全要求,阻燃尼龙已成为各大尼龙树脂生产厂的主攻目标之一。早在1986年9月上海赛璐珞厂就承担了由化工部下达的彩电中小型接插件用阻燃尼龙66     

汽车用聚酰胺亚胺

美国BP Amoco化学品和工程聚合物公司在原Amoco公司的技术和产品基础上推出许多汽车工业用工程塑料,具有高比强(强度/重量)和高比刚性(刚性/成本),其中聚酰胺亚胺(PAI,     

In—situ Composite Based on Poly （ethylene terephthalate）,Polyamide and Polyethylene with Microfibres Formed through Extrusion and Hot Stretching

In-situ composites based on dispersed poly (ethylene terephthalate) (PET) or polyamide (PA),and continuous Polyethylene (PE) were prepared through a single screw extruder of Haake rheometer system with a rod-die relatively small in diameter.The extrudate was drawn at a drawing ratio of 3.1,and then quickly cooled in cold water.The specimens were obtained by injection molding at processing temperatures less than 190℃，far below the melting temperature of PET (265℃) and PA (230℃),which can maintain the solid state of PET and PA microfiber phase in the composites.Morphological observation with scanning electron microscopy (SEM) indicated that PET and PA can more or less form in-situ microfibers at compositions studied (0-20 wt pct PET or PA),and especially,PET and PA were almost deformed into fibers at the concentration of 15wt pct.Eensile strength and especially.PET and PA were almost deformed into fibers at the concentration of 15wt pct.Tensile strength and modulus of the blends reinforced by PET or PA microfibers showed to be increased from the tensile test results.The most noticeable improvement of the tensile properties occurred at 15wt pct of PET in PET/PE system,corresponding to the highest microfiber content,where the tensile strength reached 32.5 MPa,whereas only 19.5 MPa for the pure PE.     

Zytel尼龙塑料的特性及加工应用

尼龙66(聚酰胺66)是杜邦公司的W·H·卡罗瑟斯等在30年代最先研制并开发成功的工程树脂,初期主要作合成纤维,50年代开始用作塑料,现在商品名为Zytel尼龙。50多年来,它经过不断地改进、完善和发展,以其特有的强韧、耐热、耐磨和抗化学腐蚀性著称,大量代替传统的