锻造和热处理对Al-Si和Al-Pb轴承合金在油润滑条件下耐磨性的影响

研究了锻造态和热处理态不同成分铝基轴承合金在油润滑条件下的摩擦行为，以及材料的硬度、热处理制度和锻造对材料耐磨性的影响。所用材料是 Al-8.5Si-3.5Cu 和 Al-15Pb-3.7Cu-1.5Si-1.1Fe。在锻造过程中，应变范围为10%~20%。并对材料进行T6热处理。在销-盘式磨损试验机上对材料的摩擦性能进行测试。结果表明，锻造过程使材料的硬度得到增加；铸造应变在10%~20%的范围内对材料的摩擦磨损影响不明显。     

A new supervised classification method for quantitative analysis of remotely-sensed multi-spectral data

A new supervised classification method is developed for quantitative analysis of remotely-sensed multi-spectral data. It is based on the comparisons of the probability density function of the mixture of three normal distributions for a pixel and the probability density functions of the mixture of three normal distributions for spectral classes. The comparisons are made according to the distances between them. The discriminant function, which takes values on the interval \[0, 2], is defined as Hellinger distance. The decision rule is established according to the values of Hellinger distances. The values of the discriminant functions give extra information including spectral similarity and difference percentages in the comparisons. This clarifies the classification results and could help researchers interpret better the classification results of remotely-sensed multi-spectral data.     

Polyindene/organo‐montmorillonite conducting nanocomposites. I. Synthesis,characterization, and electrokinetic properties

In this study, Na‐montmorillonite was organically modified with cetyltrimethylammoniumbromide (CTAB) and intercalated with in‐situ polymerized indene. Polyindene(PIn)/Organo‐MMT nanocomposites were obtained with three different compositions and coded as: K1: [PIn(94.5%)/O‐MMT(5.5%)], K2: [PIn(92.8%)/O‐MMT(7.2%)], and K3: [PIn(87.9%)/O‐MMT(12.1%)]. These nanocomposites were subjected to full characterization with various techniques. Electrokinetic studies were conducted to reveal the zeta (ζ)‐potential characteristics of the nanocomposites. ζ‐potentials of the materials were observed to decrease with increasing O‐MMT content. The cationic (CTAB) and anionic (sodium dodecylsulfate) surfactants were shifted the ζ‐potentials of the colloidal dispersions to more positive and more negative regions, respectively whereas nonionic surfactant (Triton X‐100) caused almost no change. The pH and temperature were observed to shift the ζ‐potential values of the nanocomposites to more negative and slightly more positive regions, respectively. With the addition of mono (NaCl), di (BaCl₂) and three (AlCl₃) valent salts, the ζ‐potential of the nanocomposites were shifted to more negative, more positive, and much more positive regions, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The pros and cons of flocking in the long-range “migration” of mobile robot swarms

In this paper, we study how flocking affects the accuracy and speed of individuals in long-range “migration”. Specifically, we extend a behavior that can generate self-organized flocking in a swarm of robots to follow a homing direction sensed through the magnetic field of the Earth and evaluate how the final points reached by the flock are scattered in space and how the speed of the flock is affected. We propose that four factors influence the performance of migration, in the proposed behavior, namely: (1) averaging through heading alignment behavior, (2) disturbances caused by proximal control behavior, (3) noise in sensing the homing direction, and (4) differences in the characteristics of the individuals. Systematic experiments are conducted to evaluate the effects of these factors using both physical and simulated robots. The results show that although flocking reduces the speed of an individual, it increases the accuracy of “migration” for flocks that are larger than a certain size.     

Magnetotransport study on as-grown and annealed n- and p-type modulation-doped GaInNAs/GaAs strained quantum well structures

We report the observation of thermal annealing- and nitrogen-induced effects on electronic transport properties of as-grown and annealed n- and p-type modulation-doped Ga_{1 - x}In_xN_yAs_{1 - y} (x = 0.32, y = 0, 0.009, and 0.012) strained quantum well (QW) structures using magnetotransport measurements. Strong and well-resolved Shubnikov de Haas (SdH) oscillations are observed at magnetic fields as low as 3 T and persist to temperatures as high as 20 K, which are used to determine effective mass, 2D carrier density, and Fermi energy. The analysis of temperature dependence of SdH oscillations revealed that the electron mass enhances with increasing nitrogen content. Furthermore, even the current theory of dilute nitrides does not predict a change in hole effective mass; nitrogen dependency of hole effective mass is found and attributed to both strain- and confinement-induced effects on the valence band. Both electron and hole effective masses are changed after thermal annealing process. Although all samples were doped with the same density, the presence of nitrogen in n-type material gives rise to an enhancement in the 2D electron density compared to the 2D hole density as a result of enhanced effective mass due to the effect of nitrogen on conduction band. Our results reveal that effective mass and 2D carrier density can be tailored by nitrogen composition and thermal annealing-induced effects.

PACS

72.00.00; 72.15.Gd; 72.80.Ey     

Effects of different polymerization protocols on the degree of conversion of two dual‐cured core buildup composites polymerized by light‐emitting diode and halogen light‐curing units

The aim of study was to investigate the effects of various curing protocols with quartz–tungsten halogen (QTH) or light‐emitting diode (LED) light‐curing units on the degree of conversion (% DC) of two dual‐cured core buildup resin composites. Two dual‐cured core buildup resin composites, Clearfil Dc Core Automix (CLF) and Grandio Core Dc (GR), were selected. Specimens were exposed to the polymerization protocols as follows: there was immediate photoactivation or photoactivation delayed by 2 or 5 min by a QTH or LED source, and one group was allowed to chemically polymerize and served as a control (n = 6). The % DC of the specimens was determined with attenuated total reflectance–Fourier transform infrared spectroscopy. The GR samples polymerized with QTH for the 5‐min‐delayed photoactivation had higher % DC values than those self‐cured, and the Clearfil Dc Core Automix (CLF) samples with immediate or delayed curing protocols with halogen yielded higher % DC values than the samples that were chemically polymerized. The comparison of the two resin composites polymerized with halogen showed a higher % DC for CLF than for GR in the 2‐min‐delayed photoactivation. On the other hand, when they were cured with LED, the % DC values of GR significantly increased after the 2‐min‐delayed photoactivation. In light of the results, it might be stated that CLF polymerized with QTH, could be the better option. GR provided adequate chemical polymerization; therefore, it might be useful in areas in which light curing is not possible. Clinicians should consider the polymerization characteristics of dual‐cured resin composites. The use of different composites may require the modification of the application procedures recommended by the manufacturer. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40560.     

Adsorption of aromatic organic acids onto high area activated carbon cloth in relation to wastewater purification

Adsorption of aromatic organic acids: benzoic acid (BA), salicylic acid (SA), p-aminobenzoic acid (pABA) and nicotinic acid (NA), onto high area activated carbon cloth from solutions in 0.4 M H(2)SO(4), in water at natural pH, in 0.1 M NaOH and also from solutions having pH 7.0 were studied by in situ UV-spectroscopic technique. The first-order rate law was found to be applicable for the kinetic data of adsorption. The rates and extents of adsorption of the organic acids were the highest from water or 0.4 M H(2)SO(4) solutions and the lowest from 0.1 M NaOH solution. The order of rates and extents of adsorption of the four organic acids in each of the four solutions (0.4 M H(2)SO(4), water, solution of pH 7.0 and 0.1 M NaOH) was determined as SA>BA>NA approximately pABA. These observed orders were explained in terms of electrostatic, dispersion and hydrogen bonding interactions between the surface and the adsorbate species, taking the charge of the carbon surface and the adsorbate in each solution into account. Adsorption of BA in molecular form or in benzoate form was analyzed by treating the solution as a mixture of two components and applying Lambert-Beer law to two-component system. The adsorption isotherm data of the systems studied were derived at 30 degrees C and fitted to Langmuir and Freundlich equations.     

Kinetic and equilibrium studies on the removal of acid dyes from aqueous solutions by adsorption onto activated carbon cloth

Removal of acid dyes Acid Blue 45, Acid Blue 92, Acid Blue 120 and Acid Blue 129 from aqueous solutions by adsorption onto high area activated carbon cloth (ACC) was investigated. Kinetics of adsorption was followed by in situ UV-spectroscopy and the data were treated according to pseudo-first-order, pseudo-second-order and intraparticle diffusion models. It was found that the adsorption process of these dyes onto ACC follows the pseudo-second-order model. Adsorption isotherms were derived at 25 degrees C on the basis of batch analysis. Isotherm data were treated according to Langmuir and Freundlich models. The fits of experimental data to these equations were examined.     

Synthesis and characterization of novel fluorine‐containing methacrylate copolymers: Reactivity ratios,thermal properties,and antimicrobial activity

The free‐radical‐initiated copolymerization of 2‐(4‐acetylphenoxy)‐2‐oxoethyl‐2‐methylacrylate (AOEMA) and 2‐(4‐benzoylphenoxy)‐2‐oxoethyl‐2‐methylacrylate (BOEMA) with 2‐[(4‐fluorophenyoxy]‐2‐oxoethyl‐2‐methylacrylate (FPEMA) were carried out in 1,4‐dioxane solution at 65°C using 2,2′‐azobisisobutyronitrile as an initiator with different monomer‐to‐monomer ratios in the feed. The monomers and copolymers were characterized by FTIR and ¹H‐ and ¹³C‐NMR spectral studies. ¹H‐NMR analysis was used to determine the molar fractions of AOEMA, BOEMA, and FPEMA in the copolymers. The reactivity ratios of the monomers were determined by the application of Fineman‐Ross and Kelen‐Tudos methods. The analysis of reactivity ratios revealed that BOEMA and AOEMA are less reactive than FPEMA, and copolymers formed are statistically in nature. The molecular weights (M _w and M _n) and polydispersity index of the polymers were determined using gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of FPEMA in the copolymers. Glass transition temperatures of the copolymers were found to decrease with an increase in the mole fraction of FPEMA in the copolymers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Spatial unmasking of birdsong in zebra finches (Taeniopygia guttata) and budgerigars (Melopsittacus undulatus).

Budgerigars and zebra finches were tested, using operant conditioning techniques, on their ability to identify a zebra finch song in the presence of a background masker emitted from either the same or a different location as the signal. Identification thresholds were obtained for three masker types differing in their spectrotemporal characteristics (noise, modulated noise, and a song chorus). Both bird species exhibited similar amounts of spatial unmasking across the three masker types. The amount of unmasking was greater when the masker was played continuously compared to when the target and masker were presented simultaneously. These results suggest that spatial factors are important for birds in the identification of natural signals in noisy environments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)