基于PLC的水泥生料配料控制系统研究

1 率值控制工艺结构 衡量生料质量的标准是水泥的三个率值．石灰石饱和系数KH、硅酸率SM、铝氧率IM，即在出磨生料中，、Fe2O3、Al2O3、SiO2诸氧化物的百分比含量必须满足以下二三式：     

分光光度法测定饱和盐水中微量杂质

详细描述了用分光光度计测定饱和盐水中的微量铝、硅、铁、碘等杂质的分析方法，利用该方法对饱和盐水进行测定，证明该检测方法简便、快速、实用，能够满足生产需要。     

低压饱和蒸汽驱动汽轮机拖动往复式压缩机的优化改进

通过技术改造,新增一套汽轮机拖动往复式压缩机,以高效利用低压饱和蒸汽。总结运行以来出现的问题及相对应的处理措施,以便使该技术得到更好的推广应用。     

高阶非线性系统状态反馈抗饱和跟踪控制

针对参数未知的高阶非线性系统,提出了一种简单有效的反馈抗饱和控制方法,并进行了状态反馈抗饱和控制吸引域估计.利用反馈控制思想,借助于李亚普诺夫稳定性理论,设计出了相应的状态抗饱和反馈控制器,并借助于Matlab进一步求出了控制器的参数.将所设计的抗饱和控制应用于Duffing混沌系统,仿真结果验证了该控制方法的有效性.     

立窑高硅酸率配料效果的对比分析

我国立窑以往采用高饱和比（KH〉0．940）、低硅酸率（SM〈2.00）和中等的铝氧率（AM〉1．20）配料的厂家较多，这样的配料方案通常均采用氟硫矿化剂，否则，熟料中的fCaO难以控制，且煤耗较高。     

变换流程中饱和塔与热水塔的重叠放置

变换流程中饱和塔与热水塔重叠放置其目的是:节约占地面积,设备管线紧凑,减少散热损失,且可只用一台热水泵完成饱和塔与热水塔之间的水循环,以节省能量。 在加压变换流程中,饱和塔应该在热水塔上面,而常压变换流程中却正好相反,这是因为: 1.常压变换饱和塔在下的必要性是为了保证热水泵的正常运行,下面从泵的允许吸入高度分析说明这个问题:     

饱和水及饱和水蒸汽特性参数的近似计算

以近似数学模型计算饱和水及饱和水蒸汽特性参数，一般情况下，其相对误差可达到１０~（－５）～１０~（－７）水平。     

2D FEM analysis for coupled thermo-hydro-mechanical-migratory processes in near field of hypothetical nuclear waste repository

In order to consider the influence of temperature and stress fields on the migration of radioactive nuclide with underground water movement, an elastoplastic model and a 2D FEM code for analysis of coupled thermo-hydro-mechanical (THM) processes in saturated and unsaturated porous media were extended and improved through introducing the percolation and migration equation, so that the code can be used for solving the temperature field, flow field, stress field and nuclide concentration field simultaneously. The states of temperatures, pore pressures and nuclide concentrations in the near field of a hypothetical nuclear waste repository were investigated. The influence of the half life of the radioactive nuclide on the temporal change of nuclide concentration was analyzed considering the thermo-hydro-mechanical-migratory coupling. The results show that, at the boundary of the vitrified waste, the concentration of radioactive nuclide with a half life of 10 a falls after a period of rising, with the maximum value of 0.182 mol/m3 and the minimum value of 0.181 mol/m3 at the end of computation. For a half life of 1 000 a, the concentration of radioactive nuclide always increases with the increase of the time during the computation period; and the maximum value is 1.686 mol/m3 at the end of the computation. Therefore, under the condition of THM coupling, the concentration of radioactive nuclide with a shorter half life will decrease more quickly with water flow; but for the radioactive nuclide with a longer half life, its concentration will keep at a higher level for a longer time in the migration process.     

生物地耕法降解含油污泥的研究

对含油质量分数为9.0%和10.2%的油泥进行生物地耕法的研究。结果表明,生物降解120d后,油泥残油质量分数分别由9.0%和10.2%降至3.1%和4.0%,石油降解率分别为65.6%和60.8%;同时利用气相色谱-质谱分析生物降解前后含油污泥中饱和烃的组分和质量分数变化,含油质量分数为9.0%和10.2%油泥中的长链烷烃分别减少39.8%和42.2%。