Inverse Gaussian Autoregressive Models

A first-order autoregressive process with one-dimensional inverse Gaussian marginals is introduced. The innovation distributions are obtained in certain special cases. The unknown parameters are estimated using different methods and these estimators are shown to be consistent and asymptotically normal. Performance of the estimators is discussed using simulation experiments.     

Symmetric coupling of multi‐zone curved Galerkin boundary elements with finite elements in elasticity

The coupling of Finite Element Method (FEM) with a Boundary Element Method (BEM) is a desirable result that exploits the advantages of each. This paper examines the efficient symmetric coupling of a Symmetric Galerkin Multi‐zone Curved Boundary Element Analysis method with a Finite Element Method for 2‐D elastic problems. Existing collocation based multi‐zone boundary element methods are not symmetric. Thus, when they are coupled with FEM, it is very difficult to achieve symmetry, increasing the computational work to solve the problem. This paper uses a fully Symmetric curved Multi‐zone Galerkin Boundary Element Approach that is coupled to an FEM in a completely symmetric fashion. The symmetry is achieved by symmetrically converting the boundary zones into equivalent ‘macro finite elements’, that are symmetric, so that symmetry in the coupling is retained. This computationally efficient and fast approach can be used to solve a wide range of problems, although only 2‐D elastic problems are shown. Three elasticity problems, including one from the FEM‐BEM literature that explore the efficacy of the approach are presented. Copyright © 2000 John Wiley & Sons, Ltd.     

A fully symmetric multi‐zone Galerkin boundary element method

This paper examines the efficient integration of a Symmetric Galerkin Boundary Element Analysis (SGBEA) method with multi‐zone resulting in a fully symmetric Galerkin multi‐zone formulation. In a previous approach, a Galerkin multi‐zone method was developed where the interfacial nodes are assigned degrees of freedom globally so that the displacement and traction continuity across the zonal interfaces are addressed directly. However, the method was only block symmetric. In the present paper, two new approaches are derived. In the first approach, the degrees of freedom for a particular zone are assigned locally, independent of the other zones. The usual linear set of equations, from the symmetric Galerkin approach, are augmented with an additional set of equations generated by the Galerkin form of hypersingular boundary integrals along the interfaces. Zonal continuity is imposed externally through Lagrange's constraints. This approach is also only block symmetric. The second approach derived from the first, uses the continuity constraints at the zonal assembly level to achieve full symmetry. These methods are compared to collocation multi‐zone and an earlier formulation, on two elasticity problems from the literature. It was found that the second method is much faster than the collocation method for medium to large scale problems, primarily due to its complete symmetry. It is also observed that these methods spend marginally more time on integration than the previous Galerkin multi‐zone method but are better suited to parallel processing. Copyright © 1999 John Wiley & Sons, Ltd.     

Synthesis of poly(4, 4′-biphenylene sulfonyl succinamide)-polysulfone blend membranes for removal of toxic metal ions from water

A novel polymer poly(4,4′-biphenylene sulfonyl succinamide) (PBSS) was synthesized via polycondensation reaction. Succinyl chloride and 4-aminophenyl sulfone were used as reactive monomers and anhydrous AlCl₃ was used as a catalyst. Both polysulfone (PSf) and PBSS were dissolved in N-methyl-2-pyrrolidone (NMP) at different compositions to obtain a homogeneous solution to fabricate PSf-PBSS blend membranes. The structure of PBSS was characterized by ATR-IR and ¹H-NMR spectroscopy. Thermal properties of PBSS were analyzed by TGA-DTA. Mechanical properties and morphology of blend membranes were analyzed by universal testing machines and field emission scanning electron microscope, respectively. The hydrophilicity of blend membranes with respect to the concentration of PBSS was studied by contact angle and water uptake studies. Upon blending, the hydrophilicity of PSf-PBSS membranes drastically increased due to the presence of large number of amide and sulfonyl groups in the matrix. The blend membranes exhibited significant increase in water flux from 100 L m⁻² h to 650 L m⁻² h⁻¹, and rejection of 100% for Pb(II) and 80% for both Cd(II) and As(III) toxic heavy metal ions. The hydrophilic nature of  CO NH and inter and intramolecular hydrogen bonding among PBSS polymer chains dispersed within rigid PSf matrix imparts softness, amide and sulfonyl groups enhance interconnected porosity and hydrophilicity of blend membranes. Hence, PBSS may serve as a low-cost novel polymeric additive for water purification and separation membrane applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48254.     

Computer simulation of pressure sintering

The densification process during pressure sintering has been analyzed using finite element analysis. This analysis uses an iterative solution algorithm. With this the densification process in complex geometries with complex boundary conditions can be analyzed and this technique is particularly suited for tackling material nonlinearity. Evolution of dense structures with gradual closure of pores is described for two typical geometries.     

Inhibitory effect of TiO2 NPs on symbiotic arbuscular mycorrhizal fungi in plant roots

While nanoparticles (NPs) are known to exhibit antimicrobial properties, their effects on symbiotic arbuscular mycorrhizal fungi (AMF) in plant roots has to be carefully examined as NPs particularly of titanium dioxide (TiO₂) reach plant roots through varied sources such as fertilisers, plant protection products and other nanoproducts. The objective of the present study is to assess the effect of TiO₂ NPs on the symbiotic behaviour of AMF colonising rice (Oryza sativa L.) plants. Using sol–gel method, TiO₂ NPs with three different sizes were successfully synthesised employing doping. Characterisation of the prepared material was done by X‐ray powder diffraction and scanning electron microscopy. The synthesised materials were applied at 0, 25, 50 and 100 mg plant–1 to the rhizosphere of mycorrhizal rice plants maintained in pots. The study revealed that the prepared NPs had an inhibitory effect on arbuscular mycorrhizal symbiosis in plant roots. Development of AMF structures such as vesicles and arbuscules was significantly reduced in TiO₂ ‐doped NPs with a relatively more inhibition in 2% TiO₂ ‐doped NPs. Among the concentrations of TiO₂ NPs applied to different treatments, %F was significantly (P < 0.001) affected at medium to higher levels of application.Inspec keywords: nanoparticles, titanium compounds, antibacterial activity, sol‐gel processing, X‐ray diffraction, scanning electron microscopy, microorganisms, cellular biophysics, nanomedicineOther keywords: symbiotic arbuscular mycorrhizal fungi, plant roots, nanoparticles, antimicrobial properties, fertilisers, plant protection, nanoproducts, AMF colonising rice, sol‐gel method, X‐ray powder diffraction, scanning electron microscopy, mycorrhizal rice plants, rhizosphere, arbuscular mycorrhizal symbiosis, soil biota, TiO₂      

Pd/Fe3O4 supported on bio-waste derived cellulosic-carbon as a nanocatalyst for C–C coupling and electrocatalytic application

The current work describes the synthesis of a new bio-waste derived cellulosic-carbon supported-palladium nanoparticles enriched magnetic nanocatalyst (Pd/Fe₃O₄@C) using a simple multi-step process under aerobic conditions. Under mild reaction conditions, the Pd/Fe₃O₄@C magnetic nanocatalyst demonstrated excellent catalytic activity in the Hiyama cross-coupling reaction for a variety of substrates. Also, the Pd/Fe₃O₄@C magnetic nanocatalyst exhibited excellent catalytic activity up to five recycles without significant catalytic activity loss in the Hiyama cross-coupling reaction. Also, we explored the use of Pd/Fe₃O₄@C magnetic nanocatalyst as an electrocatalyst for hydrogen evolution reaction. Interestingly, the Pd/Fe₃O₄@C magnetic nanocatalyst exhibited better electrochemical activity compared to bare carbon and magnetite (Fe₃O₄ nanoparticles) with an overpotential of 293 mV at a current density of 10 mA·cm^–2.     

Toxicological impact of TiO2 nanoparticles on Eudrilus euginiae

The concern regarding the toxicological effects of nanoparticles (NPs) on the terrestrial environment is increasing. To avoid risks of exposure to these NPs in the environment, it is essential to develop an understanding of their reactivity, toxicity, and persistency. Due to the increased usage of nano‐titanium dioxide (TiO₂) in various industrial products, an exponential increase in exposure is expected, which would exacerbate concerns about its ecological risks. The present study is conducted to evaluate the size‐dependent effects of TiO₂ NPs on the soil, especially on earthworm (Eudrilus euginiae). To date, many studies have been reported on the impact of TiO₂ NPs on ecotoxicology. However, histotoxicology studies are sparse. This study serves to be the first report on the size‐dependent histotoxicological impact of nano‐TiO₂ on earthworms particularly, E. euginiae. This report presents an intensive overall view of the longer time ecotoxicological impact of TiO₂ nanomaterials on various biological parameters of earthworms at cellular levels. The results show that the survival and growth of adult earthworms are severely affected by the TiO₂ NPs in the soil, which substantiates the adverse effects of TiO₂ NPs on earthworms.Inspec keywords: nanobiotechnology, nanoparticles, titanium compounds, semiconductor materials, toxicology, zoology, soil, cellular biophysics, particle sizeOther keywords: toxicological impact, nanoparticles, Eudrilus euginiae, terrestrial environment, soil, earthworm, ecotoxicology, size‐dependent histotoxicological impact, nanomaterials, biological parameters, cellular levels, TiO₂