SBS的光交联研究

利用测凝胶含量的方法对SBS热塑性弹性体在紫外光辐照下的光交联反应进行了研究；并分析了光交联的影响因素。实验表明：采用安息香二甲醚（BDK）作为引发剂、三聚异氰酸三烯丙酯（TAIC）作为交联剂，能使SBS快速有效地发生交联，且凝胶含量达到90％以上。在此基础上，对不同的交联环境（空气、N2）、温度、样品厚度进行了对比，而且初步研究了蒙脱土（MMT）的加入对交联体系的影响。     

新溶剂体系对SBS生产工艺的影响

讨论了一种新溶剂体系对热塑性弹性体SBS工业生产工艺条件的影响，并与原应用纯环己烷溶剂的生产工艺进行比较。工业试生产结果表明，对SBS生产中溶剂精制工艺过程，应用新溶剂体系时精制塔系的气相压力增大，塔温降低，聚合反应单体质量分数在l8．0％～20．0％时对聚合反应与凝聚工艺控制没有影响，可较显著地提高装置生产能力，降低产品生产成本，同时其凝固点较低，有利于提高SBS生产体系对季节与地域的适应能力。     

Blends of i‐PP and SBS. I. Influence of the in situ compatibilization on the morphology

This article concerns the in situ compatibilization of immiscible isotactic polypropylene/butadiene‐styrene‐butadiene triblock copolymer blends (i‐PP/SBS) by means of a reactive mixture. For this purpose, maleated PP (PP‐MAH) and SBS (SBS‐MAH) were used as functionalized polymers and 4,4′‐diaminediphenylmethane was used as a coupling agent between maleated polymers, resulting in a graft copolymer. Binary blends i‐PP/SBS, nonreactive ternary blends i‐PP/PP‐MAH/SBS, and reactive ternary blends i‐PP/PP‐MAH/SBS‐MAH with varying diamine and anhydride molar ratios were prepared. Torque measurements suggest a graft copolymerization during the melt blending for ternary reactive blends, but the extension of the grafting does not vary with the diamine and anhydride molar ratio, but with the elastomer concentration. The morphology of the blends was investigated by scanning electron microscopy. The morphology of binary and ternary nonreactive blends is similar, exhibiting elastomer domains disperse in the i‐PP matrix, whose sizes increase with elastomer concentration. On the other hand, the elastomer domain size in the ternary reactive blends is practically independent of the blends composition and of the diamine and anhydride molar ratio. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 847–855, 2002     

高流动、高韧性阻燃ABS的研制

采用熔融挤出的方法制备了高流动、高韧性阻燃ABS。研究了阻燃剂、热塑性弹性体（SBS）、氯化聚乙烯（CPE）、聚氯乙烯（PVC）和纳米SiO2对ABS树脂力学性能和阻燃性能的影响。结果表明：溴-锑阻燃剂的用量在13．5％～18％时，ABS树脂可以达到很好的阻燃效果，但它同时也使ABS树脂的冲击强度下降很多；在阻燃ABS体系中加入SBS或CPE或PVC以及CPE与PVC的混合物，可以提高ABS树脂的冲击强度；采用CPE和PVC以及纳米SiO2等材料组成的配方体系，可以制得高流动、高韧性阻燃ABS树脂，该树脂具有良好的力学性能和阻燃性能。     

有机硅改性SBS及其性能的研究

研究了 SBS接枝共聚反应 ,讨论了 SBS与改性剂配比 ,反应时间对粘接性能的影响     

Alder ene functionalization of polyisobutene oligomer and styrene-butadiene-styrene triblock copolymer

The Alder ene functionalization reaction of double bonds containing macromolecules such as polyisobutene oligomer (PIB) and a styrene-butadiene-styrene triblock copolymer (SBS) samples with maleic anhydride (MAH) or diethyl maleate (DEM) as enophiles is described. The analysis of the products by means of different techniques assesses the addition of the polar molecules to the reactive vinylidene units of the polymer with functional degrees (FD) depending on the type of enophile and polymer reactivity. The role of the reaction conditions and the use as Lewis acids as catalysts are discussed in terms of their influence on the addition reaction extent and on the polymer molecular weight.     

无三苯CR/SBS/MMA/BA自交联鞋用胶粘剂的研制

采用复合引发剂 ,以N 羟甲基丙烯酰胺 (NAM )及丙烯酸 (AA)为功能单体 ,与CR、苯乙烯 丁二烯嵌段共聚物 (SBS)、甲基丙烯酸甲酯 (MMA)和丙烯酸丁酯 (BA)进行多元共混接枝共聚 ,再配以混合型增粘树脂 ,研制出不含苯、甲苯和二甲苯 (简称三苯 )自交联环保型鞋用胶粘剂。探讨了SBS用量、MMA/BA配比、功能单体NAM及AA用量对胶粘剂粘合性能的影响。结果表明 ,CR/SBS/MMA/BA/AA/NAM自交联型接枝胶粘剂对非极性鞋材的粘合性能明显优于CR/MMA/BA三元接枝胶和CR/SBS/MMA/BA四元接枝胶。     

环氧SBS开环制备顺酐化离聚体及其物化性能的研究

利用环氧化苯乙烯-丁二烯-苯乙烯嵌段共聚物（ESBS）的环氧基与顺丁烯二酸氢钾（HKM）在相转移催化剂和开环催化剂存在的条件下开环反应制得钾离聚体。研究了其反应条件，由于添加了助剂BM，环氧基开环率达到了95．2％，并用FTIR确定了离聚体的生成；通过对不同环氧值ESBS开环反应，研究了不同离子基团质量摩尔浓度对离聚体物化性能的影响。     

Deformation behavior of styrene-block-butadiene-block-styrene triblock copolymers having different morphologies

Deformation behavior of styrene-block-butadiene-block-styrene (SBS) triblock copolymers having different morphologies was investigated. Due to the combination of different methods which provide information on different deformation levels (macroscopic, microscopic and molecular) complex deformation mechanisms for each type of SBS block copolymer (including glassy-rubber alternating lamellae, rubber cylinders in glassy matrix and hard domains in soft matrix morphology) could be revealed. In combination with tensile tests, Fourier transform infrared (FTIR) spectroscopy was successfully applied to study the change of orientation in individual phases using the absorption bands at 1493 and 966 cm⁻¹ for polystyrene (PS) and polybutadiene (PB) phases, respectively. For all the block copolymers investigated the PB phase always oriented stronger than the PS phase because of its lower Young's modulus. However, differences in orientation in both phases were influenced by an appropriate stress distribution within the specimens during deformation, which, in fact, depends on the morphology of the polymers. Additionally, atomic force microscopy revealed local morphological changes during uniaxial stretching, which, in fact, depend on the arrangement of the structural units.     

Studies on the poly(styrene‐b‐butadiene‐b‐styrene)/clay nanocomposites prepared by melt intercalation

Two types of SBS/OMMT composites are prepared by melt blending using a twin‐screw extruder. An X‐ray diffractometer indicates that polymer chains have intercalated into the gallery of the clay. It is shown in TEM photos that the thickness of the layer aggregate in the SBS1301 matrix is approximately 200 Å, but in the SBS4402 matrix the size of the filler particle is in micrometers. When SBS1301 is intermingled into SBS4402/OMMT, the particle size is reduced obviously. The tensile strength and elongation at break of the nanocomposite, SBS1301/OMMT, increase with the addition of OMMT; and when addition is 5phr, they achieve maximum. A small content of OMMT (less than 5phr) can prevent the deterioration of the mechanical properties of the SBS1301/MMT. In addition, a small content of SBS4402 (less than 20 wt %) can improve the mechanical properties of the SBS1301/OMMT composites. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 146–152, 2005