用部分氨基序列对家蚕丝胶的表征

从桑蚕鲜茧制取丝胶，采用凝胶电泳法分离出3种主要丝胶A、M和P，经赖氨酰内切酶、胰蛋酶降解、逆相色层分离出氨基酸碎片，再利用气相定序器确定了丝胶的氨基序列，并根据丝胶Ser1基因编码顺序表征了3种丝胶的基本结构，表明丝胶A有别于丝胶M和P，因其不含构成Ser1蛋白质主要部分的38-氨基酸重复。     

鼓形齿联轴器过渡曲线干涉因素的分析

运用计算机技术分析鼓形齿联轴器过渡曲线干涉 ,用经济、合理的工艺方法插制出有根径要求的内齿轮     

A Cold Model Aerodynamical Test of Air-Staged Combustion in a Tangential Firing Utility Boiler

The purpose of this paper is to present the flow field in the 300MW tangential firing utility boiler that used the Low NOx Concentric Firing System （LNCFS）. Using the method of cold isothermal simulation ensures the geometric and boundary condition similarity. At the same time the condition of self-modeling is met. The experimental results show that the mixture of primary air and secondary air becomes slower, the average turbulence magnitude the relative diameter of the tangential firing enlarges of the main combustion zone becomes less and when the secondary air deflection angle increases When the velocity pressure ratio of the secondary air to the primary air （p2/p1） enlarges, the mixture of the secondary air and the primary air becomes stronger, the average turbulence magnitude of the main combustion zone increases, and the relative diameter of the tangential firing becomes larger. Because the over fire air （OFA） laid out near the wall has a powerful penetration, the relative diameter of the tangential firing on the section of the OFA is very little, but the average turbulence magnitude is great. When the velocity pressure ratio of the OFA to the primary air POFA/p1 increases, the relative diameter of the tangential firing on the section of the OFA grows little, the average turbulence magnitude becomes larger and the penetration of the OFA becomes more powerful.     

羚锐制药率先采用CO2激光超微切孔设备

一套具有国际先进水平、获得两项国家专利的膏药全自动生产设备——CO2激光超微切孔膏剂生产设备不久前在河南羚锐制药股份有限公司率先投入使用。该设备是由羚锐制药与华中科技大学及武汉华工激光工程公司等经过近4年的刻苦攻关合作完成，该设备可在每个膏药片上切出直径小于0.3mm、行列间距为5mm的密集小孔阵列，     

元器件与组件

TD-SCDMA功放器模块；适用于安全及仪表应用的固体继电器；保护供电端口和下游产品的微型集成模块；用于镇流器的低导通阻抗MOSFET；耐压能力更强的家电用交流开关；高性能石英晶体振荡器；[编者按]     

基于石英晶体温度传感器的数字温度计

介绍了谐振式石英晶体温度传感器的基本原理，给出了用单片机测量温度的基本电路，分析了测量算法，给出了软件流程图。     

混凝土基础冲切破坏的统一计算法

本文用量纲分析法得出柱下基础冲切破坏时的简易计算公式，这一公式不仅简单明了，而且精度较高，能把许多前人试验的结果统一于一个公式之中避免了繁复的推导和分析。     

延边地区几种麦饭石的XRD分析

本文用Ｄ／ｍａｘ－ⅢＣＸ射线衍射仪对延边地区部分麦饭石进行定性物相分析，初步分析结果表明，这些麦饭石主要造岩矿物有石英，钠长石，钙长石，属中偏碱性岩系，是花岗岩的风化产物，为初步评价麦饭石的质量提供了数据。