Tetragonal tungsten bronze phase potential in increasing the piezoelectricity of sol-gel synthesized (K0.5Na0.5)1-xLixNbO3 ceramics

(K,Na)NbO₃ (KNN)-based ceramics have been proven to be formidable candidates among lead-free piezoelectric materials, yet poor reproducibility always hinders their progress. In the present study, the effects of low lithium substitution on the electrical properties and microstructure of (K_0.5Na_0.5)_1-xLi_xNbO₃ (KNLN) ceramics were investigated. All samples were synthesized by the sol-gel method. The Curie temperature (T_C) of the ceramics shifted to higher temperature and gradually decreased the monoclinic-tetragonal (T_M-T) phase transition. Li⁺ substitution had a prominent effect on the ferroelectric properties and improved the piezoelectric coefficient (d₃₃) up to 181 pC/N. X-Ray Diffraction (XRD) studies and Field Emission Scanning Electron Microscopy (FESEM) images revealed an inevitable tetragonal tungsten bronze (TTB) secondary phase, which was formed during the preparation process. It was demonstrated that the volatilization of Li⁺ cations facilitated TTB growth. The coexistence of two different phase structures proved to enhance the KNN piezoelectric performance.     

Reaction behavior of quartz in gibbsite-boehmite bauxite in Bayer digestion and its effect on caustic consumption and alumina recovery

A high content of quartz is usually present in Australian gibbsite-boehmite bauxite. The reaction between quartz and sodium aluminate solution at high temperatures in the Bayer process can lead to loss of alumina and sodium oxide. Therefore, to improve alumina recovery, the reaction of quartz needs to be avoided. The digestion behavior of Australian gibbsite-boehmite bauxite and pure quartz in the Bayer process at 230–250 °C was systematically studied in this paper. The mineral composition and morphology of the reaction products were characterized and the kinetics of the quartz dissolution process was studied in detail. It was shown that boehmite in gibbsite-boehmite bauxite can be completely digested at high temperature (250 °C) with a short digestion time (5 min). A short digestion time results in a low reaction rate of quartz in bauxite, and is ideal for alumina recovery at high temperatures. The quartz reaction rate rapidly increases with longer digestion times. The apparent activation energy of the dissolution of quartz in bauxite in the caustic solution is 151.9 kJ mol^?1, and the rate-controlling step of this reaction process is the interfacial chemical reaction. By controlling the particle size of bauxite, the digestion temperature, and the digestion time, the reaction rate of quartz in bauxite can be inhibited, which is beneficial for improving alumina recovery and reducing caustic consumption. Therefore, based on the above theoretical research, a process for digesting gibbsite-boehmite bauxite is proposed using high digestion temperature (250 °C), short digestion time (5 min) and large mineral size. An economic benefit of about US$101.9 million for a refinery with the annual output of 2 million tons of alumina can be created by the proposed process.     

An integrated model for analysing the effects of ultrasonic vibration on tool torque and thermal processes in friction stir welding

An integrated model of ultrasonic vibration enhanced friction stir welding (UVeFSW) is developed by integrating the thermal-fluid model with the ultrasonic field model and tool torque model. The tool torque and the heat generation rate at tool/workpiece contact interfaces are coupled with the interfacial temperature, strain rate and ultrasonic energy density. The model is used in quantitatively analysing the effects of ultrasonic vibration on tool torque and thermal processes in friction stir welding (FSW). The results show that ultrasonic vibration reduces the flow stress, which results in a decreasing of tool torque, interfacial heat generation rate and interfacial temperature. The complicated interaction of ultrasonic energy with the thermal processes in FSW leads to a gentle thermal gradient and an enhanced plastic material flow in UVeFSW. The model is validated by a comparison of the calculated thermal cycles and tool torque at various welding parameters with the experimentally measured ones.     

Generalized linear model based monitoring methods for high-yield processes

Emerge in technology brought well-organized manufacturing systems to produce high-quality items. Therefore, monitoring and control of products have become a challenging task for quality inspectors. From these highly efficient processes, produced items are mostly zero-defect and modeled based on zero-inflated distributions. The zero-inflated Poisson (ZIP) and zero-inflated Negative Binomial (ZINB) distributions are the most common distributions, used to model the high-yield and rare health-related processes. Therefore, data-based control charts under ZIP and ZINB distributions (i.e., Y-ZIP and Y-ZINB) are proposed for the monitoring of high-quality processes. Usually, with the defect counts, few covariates are also measured in the process, and the generalized linear model based on the ZIP and ZINB distributions are used to estimate their parameters. In this study, we have designed monitoring structures (i.e., PR-ZIP and PR-ZINB) based on the ZIP and ZINB regression models which will provide the monitoring of defect counts by accounting the single covariate. Further, proposed model-based charts are compared with the existing data-based charts. The simulation study is designed to access the performance of monitoring methods in terms of run length properties and a case study on the number of flight delays between Atlanta and Orlando during 2012–2014 is also provided to highlight the importance of the stated research.     

水氯镁石制备金属镁的过程集成与能量分析

以无水氯化镁和氧化镁作为中间产物，电解和热还原为两个关键方法，集成各种相关过程，构建了从水氯镁石到金属镁的综合过程网络，其中涉及24个物种、20个化学过程和25个工艺路线；建立了最低能耗分析模型用于简单和复合过程的能量分析；利用物质的标准生成焓和多温等压摩尔热容，计算得出全部反应过程及工艺过程的能量消耗和热量移除。结果表明基于还原法的最优路径是水氯镁石用石灰法转为氢氧化镁，进而煅烧成氧化镁，再铝热还原成金属镁，该过程能耗360.15 kJ/mol，放出热量–315.46 kJ/mol；基于电解法的最优路径是石灰乳法生成氢氧化镁，再煅烧成氧化镁，通过在熔融电解质中电解生成金属镁，该过程能耗738.54 kJ/mol，放出热量–135.42 kJ/mol。无水氯化镁制备耗能高，不在最优路径中。     

退火工艺对激光选区熔化成形Ti6Al4V合金组织及室温力学性能的影响

以Ti6Al4V球形粉末为原料,利用激光选区熔化成形方法制备了Ti6Al4V合金试样,采用光学显微镜、扫描电镜及力学性能测试等手段,研究了退火工艺对Ti6Al4V合金室温力学性能及组织的影响规律。结果表明: SLM成形沉积态Ti6Al4V合金室温抗拉强度超过1200 MPa,而平均断后伸长率仅为4.0%;在650 ℃下进行真空退火处理,合金的抗拉强度仍保持在1200 MPa左右,规定塑性延伸强度R_p0.2高于1150 MPa,但试样的断后伸长率<10%;而在750及800 ℃下进行真空退火处理,合金试样的抗拉强度降至1100 MPa左右,规定塑性延伸强度高于1050 MPa,伸长率达到甚至超过10%,材料的综合强韧性得到明显提升。随着真空退火加热温度和保温时间的增加,SLM成形Ti6Al4V合金原始β晶界逐渐变模糊,晶粒趋向于等轴化。与此同时,快速冷却转变的α′针状马氏体未出现明显地粗化。     

精细注水配套工艺技术优化研究

本文通过对注水配套工艺的优化研究,有效提高奈曼油田分注率和配注合格率,提高精细注水开发效果。     

The effects of preparation and cooking processes on vitamins and antioxidant capacity of sour and spicy potato silk

The effect of a traditional dish sour and spicy potato silk preparation and cooking process on B vitamins, phenolic profiles and antioxidant activities was investigated. Results showed that cutting of potato caused an increase in VB₁, VB₂, nicotinic acid, nicotinamide, VB₇ and VB₉. Soaking decreased the content of B vitamins and vitamin C. Blanching and rinsing caused the contents of B vitamins and vitamin C decrease compared to the control. The content of VB₁, VB₅ and VB₆ after rinsing increased compared to soaking and blanching processes. However, VB₁, nicotinamide, VB₅, VB₆ and VC decreased sharply after the stir-frying process. The content of VB₁, nicotinic acid, nicotinamide, VB₇ and VC retained the most after five steps compared to the control. In addition, there was no difference in VB₉ contents among different cooking processes compared to the control. Superoxide dismutase (SOD) exhibited a reduction rate of 95.32% and peroxidase (POD) 97.13% after the stir-frying process.