Synthesis,structural and optical properties of Er doped,Li doped and Er + Li co-doped ZnO nanocrystallites by solution-combustion method

Pure zinc oxide (ZnO) and 2 mol% of Er, 1 mol% of Li individually doped and Er + Li co-doped ZnO nanopowders were synthesized by auto-combustion method. Crystal structure and grain size were characterized by X-ray diffractometer and found that all synthesized samples have hexagonal wurtzite crystal structure. Scanning electron microscope (SEM) and Transmission electron microscope (TEM) studies were used to determine the morphology and size of the nanocrystallites. A UV–VIS measurement shows four absorbance peaks in the visible regions and the band gap is slowly blue shifted after annealing at 800 °C. The presence of Er, Li and the hexagonal wurtzite structure was confirmed by FT-IR studies. FT-Raman spectroscopy has been employed to study the crystalline quality and structural disorders.     

Low pressure annealing of gold nanostructures

Ultra-thin Au films sputtered on glass substrates were investigated. The samples were annealed in air and in an evacuated chamber. The dependence of the annealing process on ambient pressure during thermal treatment was studied. The thermally-induced changes in surface morphology were followed by atomic force microscopy. The changes have a great impact on dielectric, optical and physical properties of the prepared structures. UV–Vis absorption spectra were used to investigate optical parameters and showed the semiconducting characteristic of intrinsic Au clusters. It was found that reduced ambient pressure stabilizes the continuous structure of the thin gold film during the annealing process.     

Influence of annealing porous templates in an ammonia atmosphere on gallium nitride growth behaviors in hydride vapor phase epitaxy

Porous templates were fabricated by hydrogen-etching metal organic chemical vapor deposited gallium nitride (GaN); these templates were used as substrates for the growth of GaN via hydride vapor phase epitaxy. The influence of annealing porous templates on GaN growth behavior was investigated. GaN epitaxied on the unannealing porous template followed the Volmer–Weber mode with the void preserved at the growth plane, whereas the GaN film on the annealed porous templates exhibited a layer-by-layer growth and filled the porous material. The GaN crystal quality was characterized by high-resolution XRD and CL, the results indicated that GaN grown with pores preserved at the template interface had a lower dislocation density than that grown with pores filled, and the best GaN film had a TD density of 10⁴ cm⁻².     

Controlled suppression of the photoluminescence superlinear dependence on excitation density in quantum dots

We have shown that it is possible to tune, up to complete suppression, the photoluminescence superlinear dependence on the excitation density in quantum dot samples at high temperatures by annealing treatments. The effect has been attributed to the reduction of the defectivity of the material induced by annealing.     

Effects of annealing on the polymer solar cells based on CdSe-PVK electron acceptor

CdSe-poly(N-vinylcarbazole) (CdSe-PVK) nanocomposite was synthesized and utilized as the electron acceptor in the active layer of polymer solar cells. The photovoltaic properties of the polymer solar cells based on poly(3-hexylthiophene) (P3HT):CdSe-PVK as the active layer were investigated in detail. The effects of annealing temperature (100-200 °C) and time (5-60 min) on the device performance were studied. At annealing temperature of 150 °C for 30 min, the device demonstrated an optimal efficiency of 0.235% under AM 1.5 (100 mW cm⁻²) solar simulated light irradiation. The improved efficiency under the optimal conditions was confirmed by the highest light harvest in UV-vis spectra due to the increased crystallinity of P3HT after thermal annealing. Photoluminescence of these devices also exhibited that the quench effect increases with the increasing of annealing temperature, indicating that the charge separation between electron-donating (P3HT) and electron-accepting (CdSe-PVK) molecules was increased after heat treatment. Atomic force microscopy (AFM) images showed that the phase segregation and 3D interpenetrating networks of P3HT:CdSe-PVK were responsible for the enhancement of the device efficiency.     

Optimization by record dynamics

Large dynamical changes in thermalizing glassy systems are triggered by trajectories crossing record sized barriers, a behavior revealing the presence of a hierarchical structure in configuration space. The observation is here turned into a novel local search optimization algorithm dubbed record dynamics optimization, or RDO. RDO uses the Metropolis rule to accept or reject candidate solutions depending on the value of a parameter akin to the temperature and minimizes the cost function of the problem at hand through cycles where its ‘temperature’ is raised and subsequently decreased in order to expediently generate record high (and low) values of the cost function. Below, RDO is introduced and then tested by searching for the ground state of the Edwards–Anderson spin-glass model, in two and three spatial dimensions. A popular and highly efficient optimization algorithm, parallel tempering (PT), is applied to the same problem as a benchmark. RDO and PT turn out to produce solutions of similar quality for similar numerical effort, but RDO is simpler to program and additionally yields geometrical information on the system’s configuration space which is of interest in many applications. In particular, the effectiveness of RDO strongly indicates the presence of the above mentioned hierarchically organized configuration space, with metastable regions indexed by the cost (or energy) of the transition states connecting them.     

Effect of annealing on the structure and magnetic properties of CoFe2O4:SiO2 nanocomposites

The decomposition of succinate type precursors obtained by a modified sol-gel method using cobalt and iron nitrates, 1,4-butanediol and tetraethylorthosilicate, followed by the formation of single phase cobalt ferrite embedded in the silica matrix by annealing at 400–1100 °C was studied. The thermal analysis indicated the formation temperature of succinate type precursors, while the Fourier transform infrared spectroscopy (FT-IR) data confirmed the formation of the precursors in the pores of silica matrix. The formation of CoFe₂O₄ was investigated by X-ray diffraction and FT-IR, the size and shape of the nanoparticles by transmission electron microscopy, while the resulted microstructures by scanning electron microscopy. The crystallinity and crystallites size increased with the annealing temperature. The hysteresis loops revealed a direct relationship between annealing temperature and saturation magnetization in constant coercive field. The particle size of ferrite powders is critically dependent on the annealing temperature.     

Effect of annealing conditions on in situ formation of Cr2O3 diffusion barrier

The previous investigation suggested the approach for an in situ formation of Cr₂O₃ diffusion barrier by annealing the cold-sprayed Ni coatings on 310SS. In this paper, the influences of annealing conditions on the growth kinetics of Cr₂O₃ and substrate microstructure were investigated. Results show that Cr₂O₃ formed at the selected annealing temperatures of 850, 900 and 950°C for different durations of 4, 8 and 20?h. Increasing temperature enhanced the growth kinetics of Cr₂O₃ and the Mn content in the oxide layer. The annealing process for the growth of Cr₂O₃ improves the coating adhesion compared to the as-deposited coating. However, annealing at 950°C resulted in the precipitation of chromium carbides and enhanced the element inter-diffusion across the substrate/coating interface.     

Annealing effects on the optical and morphological properties of ZnO nanorods on AZO substrate by using aqueous solution method at low temperature

Vertically aligned ZnO nanorods (NRs) on aluminum-doped zinc oxide (AZO) substrates were fabricated by a single-step aqueous solution method at low temperature. In order to optimize optical quality, the effects of annealing on optical and structural properties were investigated by scanning electron microscopy, X-ray diffraction, photoluminescence (PL), and Raman spectroscopy. We found that the annealing temperature strongly affects both the near-band-edge (NBE) and visible (defect-related) emissions. The best characteristics have been obtained by employing annealing at 400°C in air for 2 h, bringing about a sharp and intense NBE emission. The defect-related recombinations were also suppressed effectively. However, the enhancement decreases with higher annealing temperature and prolonged annealing. PL study indicates that the NBE emission is dominated by radiative recombination associated with hydrogen donors. Thus, the enhancement of NBE is due to the activation of radiative recombinations associated with hydrogen donors. On the other hand, the reduction of visible emission is mainly attributed to the annihilation of OH groups. Our results provide insight to comprehend annealing effects and an effective way to improve optical properties of low-temperature-grown ZnO NRs for future facile device applications.