甲醇氧化酯化反应的Mo－Sb－O催化剂研究

探讨了采用Ｍｏ－Ｓｂ－Ｏ复合氧化物催化剂，由甲醇的氧化酯化反应合成甲酸甲酯。文中考察了反应温度、催化剂晶格、接触时间对甲醇转化率的影响，测试了催化剂性能，扼要探讨了该催化反应的机理。     

Eco‐friendly durable press finishing of cellulose‐containing fabrics

To impart easy‐care properties to cellulose‐containing fabrics along with avoiding any harmful effects of formaldehyde on both the health and the environment, attempts have been made to use citric acid (CA) as an ester crosslinking agent along with different catalytic systems in the absence and presence of certain additives. Further, fixation conditions, type of crosslinking agent, as well as type of substrate have been studied. Results revealed that the enhancement in carboxyl content, performance properties, and the decrease in tear strength (TS) as well as in whiteness indices (WI) of the finished fabric samples were increased by increasing CA concentration up to 80 g/L and by raising thermofixation temperature from 140 up to 180°C for 90 s. Inclusion of triethanolamine hydrochloride (TEA. HCl), decreased the carboxyl content, TS, color strength K/S, as well as oily stain release rating (SRR) of the finished fabric samples along with an increase in bound nitrogen (%N), wrinkle recovery angle WRA, and an improvement in WI without affecting the durable press rating (DP). Within the range examined (0–30 g/L), increasing PEG‐600 concentration improved the wet resiliency, TS, as well as WI properties of the finished samples. Increasing DMDHEU ratio in the CA/DMDHEU crosslinking system gave rise to an increase in %N, WRA (dry and wet), DP, as well as in free CH₂O of finished fabrics, along with a slight improvement in WI values. On the other hand, the TS, carboxyl content, K/S, SRR values of the finished fabric samples were lower at a higher DMDHEU ratio. Increase in carboxyl content, %N, WRA (dry and wet), DP and SRR, as well as extent of post dyeing (K/S) of the treated fabric samples upon using different ester crosslinking agents followed the descending order: citric acid > pyromellitic dianhydride. The opposite holds true for the TS, and WI values. Among the esterifying catalysts used, and for a given set of finishing conditions, NaH₂PO₂ · H₂O proved to be the most effective one, and the following order of effectiveness may be drawn: NaH₂PO₂ · H₂O > K₂HPO₄ > Na₃–citrate > Na₂–tartrate. Inclusion of silicone softener in the finishing formulation brought about an improvement in softeness degree, WRA, %N, DP, TS as well as K/S values along with a decrease in carboxyl content, SRR, and WI values of the treated fabric samples, regardless of the used silicone softener.The performance properties of the finished fabric samples were determined by the type and nature of the substrate. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2243–2253, 2002     

没食子酸异戊酯的合成研究

以壳聚糖硫酸盐为催化剂，用没食子酸与异戊酸直接酯化合成了没食子酸异戊酯，用正交试验确定了酸酸物质的量比、催化剂用量、反应时间对没食子酸异戊酯收率的影响。得到了最佳工艺条件：醇酸物质的量比为10：1，催化剂用量为1．0g，反应时间为4h，没食子酸异戊酯的收率可达96．2％。实验表明，该催化剂用于合成没食子酸异戊酯具有极好的催化活性和重复使用性。     

PTA质量对PET生产的影响及对策

PTA原料的质量对PET装置生产过程有显著影响,本文结合生产实际,分析讨论了PTA原料中对PET生产不利影响的质量指标,并提出了相应的对策。     

含水混酸的酯化分离试验

基于中国石化扬子石化公司化工厂醋酸装置产生大量的含水甲酸、乙酸副产品,通过试验将含水混酸进行酯化、分离,得到符合工业品规格的甲酸乙酯、乙酸乙脂。试验确定酯化塔回流比为3∶1,乙醇分批次加入,乙醇实际投入量与理论量的比为1.2。酯化分离结果:甲酸乙酯的单程收率89.5%,纯度大于97%,乙酸乙酯的单程收率80.1%,纯度大于97%。     

酯化釜塔顶温度控制系统改造

介绍了串级控制在仪化研究院半连续聚酯试验装置酯化釜塔顶温度控制上的应用,解决了酯化釜塔顶温度调节滞后问题,提高了调节过程的品质     

强酸性阳离子交换树脂催化合成氯乙酸异辛酯的研究

对采用７３２强酸性苯乙烯系阳离子交换树脂作催化剂合成氯乙酸异辛酯进行了实验研究，提出了适宜的反应条件。实验结果表明，该法酯化率高、过程简便、产物颜色浅，优于浓硫酸作催化剂。     

糠酸甲酯的合成

以糠醛为起始原料,通过康尼查罗反应、酰氯化和酯化反应合成了糠酸甲酯,实验结果表明:酯化反应时间2.5h,糠酸甲酯收率可达85.0%。     

对硝基苯甲酸催化酯化研究进展

综述了对硝基苯甲酸催化酯化的研究情况，重点介绍了直接酯化法催化剂的进展，包括酸催化剂和非酸催化剂。认为固体超强酸催化活性高，使用寿命长，易与产物分离，不腐蚀设备，无环境污染；相转移催化剂应用较多，酯化收率较高。     

废聚酯饮料瓶裂解制备聚酯清漆

叙述了以废聚酯饮料瓶为原料,经过醇解、酯化以及缩聚等工艺过程,制成透明聚酯清漆。该法为废饮料瓶回收利用开辟了可行之路,也为聚酯清漆找到了廉价的原材料。