基于DSP+CPLD杆塔冲击接地电阻测量仪设计和实现

研制了一种直接测量杆塔冲击接地电阻的仪器,本装置对电压电流通道进行同时采样,运用了TI公司DSP芯片TMS320LF2407A和可编程的复杂逻辑器件MAX7128AE作为主控芯片,同时在外面扩展了1M字的FLASHROM.并对测量方法的理论基础进行了介绍,通过实测,验证了该测量仪的准确性.     

Synthesis and growth of nonlinear infrared crystal material CdSe via seeded oriented temperature gradient solution zoning method

Single crystals of CdSe were grown by using seeded oriented temperature gradient solution zoning (STGSZ) method with the sizes of 20 mm in diameter and 80 mm in length. The crystals were characterized with X-ray diffraction, transmission spectrophotometer and infrared microscope. The transmission spectra showed that the infrared transmission is above 65% and the mean absorption was 0.01-0.04 cm-1 in the range of 2.5-20 μm.With 2.797 μm Cr, Er:YSGG laser as pumping source,experiments of optical parametric oscillator (OPO) were performed by using fabricated 5mm×5mm×30mm device crystal. The signal and idler wavelengths and the output average power were respectively 4.3 μm, 8 μm and 400 μJ. Optical-to-optical conversion efficiency was obtained by 12%.     

空间用晶体振荡器热真空性能研究

空间用晶体振荡器是航天器的重要元器件,为航天器提供计时和产生标准频率.晶体振荡器的使用性能高度依赖于应用和任务环境,热应力、机械应力、辐射应力等都对石英晶体振荡器的使用性能造成影响.在空间真空热环境下,晶体振荡器使用性能与地面常压环境下有很大的不同,为了检验空间用石英晶体振荡器的热真空环境适应性,文章针对空间用石英晶体...     

C波段高稳定陶瓷谐振振荡器设计

文章介绍了利用陶瓷谐振器（CR）来提高振荡器频率稳定度的方法,并利用专用微波电路设计软件（AWR）对该方法进行了分析,同时还对压控支路进行了温度补偿设计。根据分析结果制作的C波段高稳定陶瓷振荡器取得令人满意的指标：在全温范围测试结果为温漂≤50×10^-6／℃,带内线性≤1．1,频率稳定度≤＋15MHz,相噪≤-108...     

Dynamic investigation of laminated composite beams with shear and rotary inertia effect subjected to the moving oscillators using FEM

An algorithm based on the finite element method (FEM) has been developed to study the dynamic response of composite laminated beams subjected to the moving oscillator. The first order shear deformation theory (FSDT) is assumed for the beam model. The algorithm accounts for the complete dynamic interaction between the components of system. The proposed method can also be applied to the general moving mass and the simplified moving force problems. After deriving the governing equations of motion of beam and oscillator, the corresponding equations of motion are integrated by applying the Newmark’s time integration procedures to obtain the system responses in each time step. The numerical results of free vibration and moving force problems analysis of isotropic and composite laminated beams are presented and, whenever possible, compared to the available analytical solution and other numerical results in order to demonstrate the accuracy of the present method. In addition, parametric analysis is carried out over a wide range of velocities and mass, frequency and damping ratios of system components.     

Wide‐Band Fine‐Resolution DCO with an Active Inductor and Three‐Step Coarse Tuning Loop

This paper presents a wide‐band fine‐resolution digitally controlled oscillator (DCO) with an active inductor using an automatic three‐step coarse and gain tuning loop. To control the frequency of the DCO, the transconductance of the active inductor is tuned digitally. To cover the wide tuning range, a three‐step coarse tuning scheme is used. In addition, the DCO gain needs to be calibrated digitally to compensate for gain variations. The DCO tuning range is 58% at 2.4 GHz, and the power consumption is 6.6 mW from a 1.2 V supply voltage. An effective frequency resolution is 0.14 kHz. The phase noise of the DCO output at 2.4 GHz is –120.67 dBc/Hz at 1 MHz offset.     

基于弯曲板波的延迟线振荡器的ANSYS仿真

针对复合板结构中弯曲板波谐振频率计算相对复杂的问题,建立并分析了基于弯曲板波延迟线振荡器的理论模型,计算得到A0(0阶反对称)模式板波的谐振频率为41 MHz;为了验证理论分析的结果,利用有限元软件ANSYS建立了基于弯曲板波的延迟线振荡器的3D有限元模型,并对其进行了谐响应分析以及瞬态动力学分析。谐响应分析得到A0模式的谐振频率为37.2 MHz,与理论计算结果的相对误差为9.3%;瞬态动力学分析得到A0模式的谐振频率为39.1 MHz,与理论计算结果的相对误差为4.6%。计算和仿真为基于弯曲板波的延迟线振荡器的结构设计提供了重要的依据。     

基于光电混合双环的高边模抑制比振荡器

为了进一步有效提高光电振荡器的性能,提出了一种基于光电混合双环的高边模抑制比振荡器.利用两级电功分器构成电增益环腔,结合偏振分束器和偏振合束器形成的光纤双环结构,在没有引入外调制器和电滤波器的前提下,得到了高边模抑制比的小型化光电振荡器.实验中光纤长度取110m和2 km,获得了中心频率为11.4 GHz的微波信号,边模抑制比为60 dB,其相位噪声为-103.6 dBc/Hz@10 kHz.     

一种基于混沌振子的DSSS信号盲检测方法

直接序列扩频通信是一种具有强保密性和抗干扰性的先进通信体制,对DSSS信号的检测具有重要作用。将非线性科学中的混沌理论应用于DSSS信号的盲检测,结合DSSS信号特征研究了一种利用混沌振子进行检测的方法。首先分析了洛伦兹混沌振子检测周期信号的原理和DSSS信号模型,然后构造出了一个基于混沌振子阵列的盲检测系统,可实现对低信噪比条件下对DSSS信号的盲检测。最后,通过计算机仿真结果表明了该方法的有效性,且性能优于过去的一些算法。     

适用于DC-DC开关电源的振荡器设计

应用于手机等通信电子产品电源系统的DC-DC开关电源变换器芯片,要求具有高性能的振荡器。鉴于此要求,设计了一款具有充放电电容的高性能振荡器。该振荡器基于0.5μm BCD工艺库,利用Cadence和Hspice软件,在芯片系统典型应用环境下仿真,得到的内同步振荡频率为794 k Hz,外部EN同步振荡频率为1 MHz到2MHz;在VCC=5.5 V,0~125℃温度范围内振荡器的频率偏移在6%以内。仿真结果显示,该振荡器性能良好,适用于DC-DC开关电源。