Countercurrent approach to the enrichment of Δ9c,11t-and Δ10t,12c-18:2 isomers by urea complexation

CLA refers to a group of geometrical and positional isomers of linoleic acid. CLA has been shown to have potentially beneficial effects on cancer, atherosclerosis, and body metabolism in animals. Mixtures containing equal amounts of these isomers are commonly used in many research studies because of their greater availability and lower cost relative to pure isomers. This has hindered progress in elucidating the biological properties of specific isomers and their relevance in animal and human biology. A method was developed that offers a compromise between cost and utility to make available enriched mixtures of either the Δ9c,11t- or Δ10t,12c-18:2 isomers for use in a wide range of experimental applications. A countercurrent approach was developed to separate the Δ9c,11t- and Δ10t,12c-18:2 isomers from an equal mixture of these two isomers by urea complexation. After three successive rounds of complexation using an equal amount of CLA and urea, a fraction enriched in Δ9c,11t-18:2 containing 42.5 and 17.4% of Δ9c,11t-and Δ10t,12c-18:2, respectively, was recovered. After a single round of complexation using 2.5 g urea/g CLA, a fraction enriched in Δ10t,12c-18:2 was recovered containing 29.7 and 69.1% of Δ9c,11t- and Δ10t,12c-18:2, respectively.     

The influence of soil properties on the effectiveness of phenylphosphorodiamidate (PPD) in reducing ammonia volatilization from surface applied urea

Urea can be an inefficient N source due to rapid hydrolysis by soil urease leading to NH₃ volatilization. The current study investigated the effect of the urease inhibitor phenylphosphorodiamidate (PPD) incorporated at two concentrations (0.5% and 1% w/w) within the fertilizer granule on NH₃ volatilization from surface applied urea. The daily rates of NH₃ loss from 20 soils of widely differing properties from Northern Ireland were measured over 14 days using ventilated enclosures under simulated spring conditions. Cumulative loss rates were calculated and fitted to a logistic model from which total NH₃ loss (Amax) and the time to maximum rate of loss (Tmax) were determined. Stepwise multiple linear regression analysis related the effectiveness of PPD in reducing NH₃ volatilization from urea to soil properties.The total cumulative loss of ammonia from unamended urea varied from 0.37 to 29.2% depending on soil type. Ammonia volatilization appeared to be greatest on a soil with a high pH (R² = 0.65), a low titratable acidity (TA) (R² = 0.63) and a soil that was drying out (R² = 0.50). Soil pH was negatively correlated with TA (r = –0.826, P < 0.001) suggesting that soils with a low TA may have received recent lime. Including cation exchange capacity (CEC) and % N as well as pH-KCl in the multiple linear regression equation explained 86% of the variance.The effectiveness of PPD in reducing Amax varied between 0% to 91% depending on soil type, the average over all 20 soils being 30 and 36% for 0.5% and 1% PPD respectively. The most important soil properties influencing the effectiveness of the urease inhibitor were soil pH-H₂O and TA accounting for 33% and 29% of the variance respectively. PPD was less effective on a soil with a high pH and low TA. These were the soil conditions that led to high NH₃ volatilization from unamended urea and may explain why PPD had limited success in reducing ammonia loss on these soils. Multiple linear regression analysis indicated that 75% of the variation in the % inhibition of NH₃ loss by PPD could be significantly accounted for by pH-H₂O, initial soil NO ₃ ^- -N concentration, % moisture content and % moisture loss.The delay in Tmax by PPD ranged from 0.19 to 7.93 days, the average over all 20 soils being 2.5 and 2.8 days for 0.5% and 1% PPD respectively. TA, % moisture content, urease activity and CEC were soil properties that significantly explained 83% of the variation in the % delay in Tmax by PPD in multiple linear regression analysis. However, none of these soil properties were significant on their own. As urea hydrolysis occurs rapidly in soil, delaying Tmax under field conditions would increase the chance of rain falling to move the urea below the soil surface and reduce NH₃ volatilization. A urease inhibitor should be more effective than PPD on soils with a high pH and low TA to be successful in reducing high NH₃ losses.     

Implicit Bayesian Inference Using Option Prices

Abstract. A Bayesian approach to option pricing is presented in which posterior inference about the underlying returns process is conducted implicitly via observed option prices. A range of models allowing for conditional leptokurtosis, skewness and time‐varying volatility in returns are considered, with posterior parameter distributions and model probabilities backed out from the option prices. Models are ranked according to several criteria, including out‐of‐sample predictive and hedging performance. The methodology accommodates heteroscedasticity and autocorrelation in the option pricing errors, as well as regime shifts across contract groups. The method is applied to intraday option price data on the S&P500 stock index for 1995. While the results provide support for models that accommodate leptokurtosis and skewness, no one model dominates when all criteria are considered.     

Structural–Property Relations in a Reduced and Internally Biased Oxide Wafer (RAINBOW) Actuator Material

Reduced and internally biased oxide wafer (RAINBOW) actuators are fabricated by a controlled reduction of Pb(Zr, Ti)O₃-based piezoelectric material. The reduction process results in a conductive layer composed of an interconnected metallic lead phase and refractory oxides (ZrTiO₄, ZrO₂, La₂O₃, etc.). The nature of the reduction is discovered to be the result of a complex volume change leading to a nanoscale interconnected metallic structure. The distribution of phases within the cermet vary within the thickness of the wafer. Within the piezoelectric ceramic phase, the reduction process modifies the grain-boundary structure to give two distinct types of fracture: transgranular and intergranular. The complexed microstructures of the RAINBOW actuator materials are discussed in relation to their dielectric and piezoelectric properties.     

The comparative effect of a mixed urea,ammonium nitrate,ammonium sulphate granular formulation on the efficiency of N recovery by perennial ryegrass

The¹⁵N isotope was used to study the mode of action of individual nitrogen sources in a 30% urea:30% ammonium nitrate: 10% ammonium sulphate:30% filler (w/w) granular fertilizer for perennial ryegrass in a greenhouse pot experiment. The fertilizer consisted of two types of granules, one containing 80% urea and 20% filler and the second containing 48% ammonium nitrate (AN), 16% ammonium sulphate (AS) and 36% filler. In addition the effect of dolomite compared with silica as the filler was investigated on nitrogen recovery from the 30:30:10:30 formulation.Dolomite adversely affected the recovery of nitrate N from the system and evidence suggested that MgCO₃ was the active component. Granules containing dolomite resulted in a lower dry-matter yield than those containing silica, however the difference was not significant as nitrate contributed only 20% of the N in the formulation. AN gave the greatest DM yield and urea the lowest with AS being intermediate. The¹⁵N budget in shoots, roots and soil indicated that only 65% of the N from urea was recovered at the end of the experiment compared with 86% for AN and 91% for AS. The dry-matter yield of the 30:30:10:30 formulation using silica as the filler was intermediate between urea and AN; however, the apparent N recovery was significantly higher than expected from the sum of the individual components. The use of¹⁵N labelling indicated that using separate granules for ammonium N and urea the recovery of urea was improved by 11% in the triple N mixture when both AN and AS were present in the second granule compared to the recovery on its own. The enhanced recovery of urea appeared to be a function of AN and AS acting together as neither source in double combination with urea had any effect on urea N recovery.Urea enhanced the recovery of nitrate N by 10% but decreased the recovery of AS by 6% (in the 30:30:10:30 formulation) in comparison with the single sources on their own. The results indicate that interactions can occur between N sources even when they are physically separated by being in different granules.     

Applications of laser Raman microprobe spectroscopy to the characterization of coals and cokes

Optical microscopy is widely used in the characterization of coals and cokes. This Paper shows that the laser Raman microprobe (MOLE) which combines an optical microscope and a Raman spectrometer can provide useful additional information. Three main areas were investigated: identification of minerals in coal and coke; structural characterization of coals and cokes; and the interaction of inorganic additives and coal. Where possible, the results were compared with conventional optical microscopy measurements whereby it was shown that the optical texture and Raman spectra of cokes are not closely related. The Raman spectra of high temperature cokes were used to estimate the size of microcrystalline regions.     

Diastereoselective Heterogeneous Catalytic Hydrogenation of Aromatic or Heteraromatic Compounds

The diastereoselective hydrogenation catalyzed by heterogeneous metallic catalysts uses a covalently bound chiral auxiliary to induce the chirality. It remains an active synthetic methodology in the asymmetric synthesis of chiral products and may proceed with high diastereoselectivity. This review describes recent examples using this method, such as hydrogenation of C=C, C=O, and C=N bonds. The use of a chiral auxiliary group has also been successfully applied to the hydrogenation of aromatic and heteroaromatic rings. The choice of the chiral auxiliary was found to play a key role in the asymmetric hydrogenation. The results could be explained in terms of steric effect, with a preferred conformation of the adduct substrate and the addition occurring from the less bulky side. The catalytic metal, the support and the presence of additives were also found to have a significant influence.     

Effect of amino acid deletions in the O-glycosylated region of Aspergillus awamori glucoamylase

Aspergillus awamori glucoamylase (GA) contains globular catalyticand starch-binding domains (residues 1–471 and 509–616,respectively). A heavily O-glycosylated sequence comprises twoparts. The first (residues 441–471) in the crystal structurewraps around an /-barrel formed by residues 1–440. Thesecond (residues 472–508) is an extended, semi-rigid linkerbetween the two domains. To investigate the functional roleof this linker, we made internal deletions to remove residues466–512 (GA1), 485–512 (GA2) and 466–483 (GA3).GA2 and GA3 were expressed in Saccharomyces cerevisiae culturesupernatants at 60 and 20% the wild-type level, respectively,while GA1 was almost undetectable. Western blots comparing extracellularand intracellular fractions indicated that the region deletedin GA3 was critical for secretion, while the region deletedin GA2 contributed to the production of a stable enzyme structure.The activities of purified GA2 and GA3 on soluble and insolublestarch were similar to those of wild-type GA, indicating thatfor soluble starch their deletions did not affect the catalyticdomain and for insoluble starch the linker does not coordinatethe activities of the catalytic and starch-binding domains.The deletions had a significant negative effect on GA2 and GA3thermos tabilities.     

Parameters governing strain induced crystallization in filled natural rubber

A series of in situ synchrotron X-ray diffraction experiments are performed during the stretching of weakly and highly vulcanized carbon black (CB), silica and grafted silica filled natural rubber sample (NR). Conversely to literature, Mullins effect observed after one stretching cycle modifies the strain induced crystallization (SIC) behaviour of the sample. The onset of crystallization is ruled by the strain amplification induced by the filler presence. Moreover, fillers (CB and silica) behave as additional crosslinks into NR network, through filler-rubber interactions that either accelerate or slow down the crystallization rate depending on NR matrix chemical crosslink density. This is consistent with the assumption that effective network density, which is due to chemical crosslinks, entanglements, and filler-rubber interactions, controls the crystallization rate.