Ni activated Mo2C nanoparticles supported on stereotaxically-constructed graphene for efficient overall water splitting

Exploring cost-effective, high-efficiency and stable electrocatalysts for overall water splitting is greatly desirable and challenging for sustainable energy. Herein, a novel designed Ni activated molybdenum carbide nanoparticle loaded on stereotaxically-constructed graphene (SCG) using two steps facile strategy (hydrothermal and carbonization) as a bifunctional electrocatalyst for overall water splitting. The optimized Ni/Mo₂C(1:20)-SCG composites exhibit excellent performance with a low overpotential of 150 mV and 330 mV for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively to obtain a current density of 10 mA cm^?2 in 1.0 M KOH solution. In addition, when the optimized Ni/Mo₂C(1:20)-SCG composite is used as a bifunctional electrode for overall water splitting, the electrochemical cell required a low cell voltage of 1.68 V at a current density of 10 mA cm^?2 and long-term stability of 24 h. More significantly, the synergetic effects between Ni-activated Mo₂C nanoparticles and SCG are regarded as a significant contributor to accelerate charge transfer and promote electrocatalytic performance in hybrid electrocatalysts. Our works introduce a novel approach to design advanced bifunctional electrodes for overall water splitting.     

Graph learning in low dimensional space for graph convolutional networks

Multimedia Tools and Applications - Graph Convolutional Networks (GCNs) recently have been adopted in several feature representation studies for different classification tasks. While many of these...     

Effects of ionic radius on phase evolution in Ln-Al co-doped Ca1-xLnxZrTi2-xAlxO7 (Ln = La,Nd, Gd,Ho, Yb) solid solutions

Zirconolite ceramic has been considered as a promising matrix to dispose high-level radioactive waste due to its excellent performance in immobilizing radionuclides. In this work, a series of zirconate solid solutions with stoichiometric Ca_1-xLn_xZrTi_2-xAl_xO₇ (Ln = La, Nd, Gd, Ho, Yb; x?=?0.1–1) were systematically studied to investigate the radius effect on their phase evolution. Powder X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive X-Ray spectrometry (SEM-EDX) were used to characterize the products. XRD and SEM results show that complete solid solutions of Ln and Al in zirconolite phase for Ca_1-xLn_xZrTi_2-xAl_xO₇ cannot found. In the Ca_1-xLa_xZrTi_2-xAl_xO₇ ceramics, single zirconolite phase cannot form, instead of multiple phases, such as zirconolite-2M, zirconia, perovskite and LaTi₂Al₉O₁₉. In the Nd-Al co-doping ceramics, nearly single zirconolite-2M and zirconolite-3O were found at x?≤?0.6 and 0.8?≤?x?≤?0.9, respectively. The miscibility gap between zirconolite-2M and 3O was found at x?=?0.7. Single zirconolite-2M formed in the Gd-Al, Ho-Al and Yb-Al co-doped ceramics can only be detected in a compositional range of 0.1?≤?x?≤?0.8. Higher incorporation contents in these three series can form an additional phase cubic zirconia which is usually a ceramic waste form for radionuclides. Based on the XRD data, lattice parameters of zirconolite-2M and zirconolite-3O were calculated by Pawley refinement method. The evolution of lattice parameters of zirconolite-2M shows great difference between different lanthanide ions, indicating different substitution mechanisms in the Ln-Al co-doped zirconolite-2M.     

基于Matlab的制芯机器人夹持器稳定性研究与分析

由于铸造厂制芯机器人的工作环境恶劣,机器人抓取砂芯的稳定性较差,时常出现掉砂芯、夹伤砂芯的问题。针对上述问题建立以夹持器、气压、机械振动的系统数学模型,采用高阶系统极点在[s]平面的分布法来判定该系统的稳定性。在确保高阶系统极点值不变的情况下,通过改变系统的零点值来观察零点值对系统稳定性、振荡衰减时间的影响。用Matlab的pzmap和impulse函数分别对系统的零点、极点分布和零点值的不同对系统响应进行仿真,运用仿真结果与现场试验进行优化参数,结果表明采用一种刚度与柔度各为1/2的夹持器对制芯机器人的稳定性具有较好优化效果。     

Microstructure,mechanical and wear properties of aluminum borate whisker reinforced aluminum matrix composites

The microstructural features and the consequent mechanical properties were characterized in aluminium borate whisker (ABOw) (5, 10 and 15 wt.%) reinforced commercially-pure aluminium composites fabricated by conventional powder metallurgy technique. The aluminium powder and the whisker were effectively blended by a semi-powder metallurgy method. The blended powder mixtures were cold compacted and sintered at 600 °C. The sintered composites were characterized for microstructural features by optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM) and X-ray diffraction (XRD) analysis. Porosity in the composites with variation in ABOw contents was determined. The effect of variation in content of ABOw on mechanical properties, viz. hardness, bending strength and compressive strength of the composites was evaluated. The dry sliding wear behaviour was evaluated at varying sliding distance at constant loads. Maximum flexural strength of 172 MPa and compressive strength of 324 MPa with improved hardness around HV 40.2 are obtained in composite with 10 wt.% ABOw. Further increase in ABOw content deteriorates the properties. A substantial increase in wear resistance is also observed with 10 wt.% ABOw. The excellent combination of mechanical properties of Al−10wt.%ABOw composites is attributed to good interfacial bonds, less porosity and uniformity in the microstructure.     

石墨烯/碱式硫酸镁晶须/PVC复合材料的制备及性能表征

以改进的Hummers法制备还原氧化石墨烯(RGO),以RGO和碱式硫酸镁晶须(MHSHw)为填料,采用机械球磨法制备RGO/MHSHw/PVC复合粉料,经平板硫化机热压成型得三相复合板材。考察了RGO和MHSHw对复合材料电阻率、阻燃性能及力学性能的影响。结果表明:RGO具有很好的片层结构和导电性;当MHSHw添加量为5%,RGO添加量为1%时,RGO/MHSHw/PVC复合板材的表面电阻率为4×106Ω/square,比纯PVC下降8个数量级,达到了商业抗静电效果,拉伸强度达到最大值17.61 MPa,比纯PVC提高了44.04%,复合板材氧指数>33%,具有阻燃性能,得到力学性能优良兼具有抗静电和阻燃性能的复合材料。     

Significant hydrogen isotopes permeation resistance via nitride nano-multilayer coating

This work demonstrated a significant hydrogen isotopes permeation resistance in nitride nano-multilayer coatings. Dense and homogeneous CrN/AlTiN nano-multilayer coatings with different period-thicknesses were fabricated as hydrogen isotopes permeation barriers (HIPB) to highlight the effect of interface on hydrogen isotopes permeation resistance. Deuterium permeation measurement found that the nano-multilayer coatings had much higher permeation reduction factors (PRF) than the corresponding monolayer coatings, and more importantly there was an interface-number-dependent deuterium permeation resistance where the nano-multilayer coating containing more interfaces had higher PRF. Interfaces in the nano-multilayer coatings play a key role in the significant improved deuterium permeation resistance which was explained from three aspects. Ceramic nano-multilayer coatings offer a promising alternative for the design and preparation of HIPB in the hydrogen related fields.     

A direct formate microfluidic fuel cell with cotton thread-based electrodes

A direct formate microfluidic fuel cell with cotton thread-based electrodes is proposed. The palladium catalyst is directly coated on cotton threads by repeated dipping method to prepare electrodes, which integrates the flow channel and electrode together and provides exposed active sites for enhancing the mass transfer on the anode and cathode. The aqueous anolyte and catholyte transport through cotton threads by capillary force with aid of gravity, eliminating the use of any external pump and facilitating the integration and miniaturization of the whole system. In the experiment, a three-flow channel structure is employed. The fuel is sodium formate and the oxidant is hydrogen peroxide. 1 M Na₂SO₄ solution is introduced into the middle channel formed by cotton threads with no catalyst to alleviate the reactant crossover. Performance is evaluated under various catalyst loadings, fuel concentrations and differences in height between the inlet and outlet. Results show that the fuel cell produces an open circuit voltage (OCV) of 1.41 V. The maximum current density of 74.56 mA cm⁻² and the peak power density of 24.75 mW cm⁻² are yielded when the palladium loading is 1 mg cm⁻¹ and the difference in height between the inlet and outlet is 7 cm, using 4 M HCOONa as fuel. Furthermore, the performance of the fuel cell increases first and then decreases with increasing the palladium loading. The same variation is observed with increasing the fuel concentration. However, the performance gradually increases with increasing the difference in height from 3 cm to 7 cm. The proposed microfluidic fuel cell with cotton thread-based electrodes shows enormous potential as a micro power source for portable devices.     

CNTs decorated with CoFeB as a dopant to remarkably improve the dehydrogenation/rehydrogenation performance and cyclic stability of MgH2

The chain-like carbon nanotubes (CNTs) decorated with CoFeB (CoFeB/CNTs) prepared by oxidation-reduction method is introduced into MgH₂ to facilitate its hydrogen storage performance. The addition of CoFeB/CNTs enables MgH₂ to start desorbing hydrogen at only 177 °C. Whereas pure MgH₂ starts hydrogen desorption at 310 °C. The dehydrogenation apparent activation energy of MgH₂ in CoFeB/CNTs doped-MgH₂ composite is only 83.2 kJ/mol, and this is about 59.5 kJ/mol lower than that of pure MgH₂. In addition, the completely dehydrogenated MgH₂−10 wt% CoFeB/CNTs sample can start to absorb hydrogen at only 30 °C. At 150 °C and 5 MPa H₂, the MgH₂ in CoFeB/CNTs doped-MgH₂ composite can absorb 6.2 wt% H₂ in 10 min. The cycling kinetics can remain rather stable up to 20 cycles, and the hydrogen storage capacity retention rate is 98.5%. The in situ formation of Co₃MgC, Fe, CoFe and B caused by the introduction of CoFeB/CNTs can provide active and nucleation sites for the dehydrogenation/rehydrogenation reactions of MgH₂. Moreover, CNTs can provide hydrogen diffusion pathways while also enhancing the thermal conductivity of the sample. All of these can facilitate the dehydrogenation/rehydrogenation performance and cyclic stability of MgH₂.     

The recent development on MgH2 system by 16 wt% nickel addition and particle size reduction through ball milling: A noticeable hydrogen capacity up to 5 wt% at low temperature and pressure

The addition of nickel as catalyst and particle size reduction through milling process is considered as the best approach for MgH₂ properties to be thermodynamically and kinetically more favorable. The recent development in MgH₂ is done by adding Ni (14–16 wt%) and particle size reduction through simple mechanical milling at a large sample of 100 g. The research sequences are easy to adopt for the implementation and sustainable research of MgH₂. Starting from the moisture test to the milling process, continue with particle size distribution (PSD) for the milled sample and final moisture test after PSD. Some critical finding from our research includes high capacity storage of Mg₈₄:Ni₁₆ above 5 wt% H₂ within 20 min at 573 K, the effect of moisture content on system performance and the different effect of carbon (C) in the system at specific temperature and pressure that may have.