小曲率轿车覆盖件拉深模设计

在分析小曲率轿车覆盖件成形特点的基础上，指出采用阶梯拉深是提高材料塑性变形、减少回弹的有效措施，并以一个典型零件——前盖外板为例，设计了其拉深J-艺补充面，并给出了有限元模拟结果以验证有效性。     

Splash Splat to Disk Splat Transition Behavior in Plasma-Sprayed Metallic Materials

A variety of metallic powder particles were thermally sprayed onto the mirror polished metallic substrate surface and the effect of both substrate temperature and ambient pressure on the flattening behavior of the particle was systematically investigated. In the flattening behavior of the sprayed particle onto the substrate surface, critical conditions were recognized both in the substrate temperature and ambient pressure. That is, the flattening behavior changed transitionally on that critical temperature and pressure range, respectively. A transition temperature, T _t, and transition pressure, P _t, were defined and introduced, respectively for those critical conditions. The fact that the dependence of both transition temperature and transition pressure on the sprayed particle material had similar tendency indicated that the wetting of the substrate by the molten particles seemed to be a domination in the flattening. Three-dimensional transition curvature by combining both transition temperature and transition pressure dependence was proposed as a practical and effective controlling principle of the thermal spray process. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

基于曲率匹配和递归排序的自适应排样算法

为提高盘状毛坯的使用率,提出一种口腔修复加工中模型边界在盘状毛坯中的排样算法,主要包括边界匹配、多边形定位及递归排序.首先基于协方差矩阵及矩阵SVD分解算法对模型多边形进行分段,并采用等弧长曲线采样曲率匹配确定待匹配模型边界;然后依毛坯边界角度分布及沿圆周排样的思想确定模型轮廓的旋转和平移定位;最后提出一种基于包络率的递归排序算法,对在排样过程中发现的大孔洞可动态地调整排样顺序.实验结果表明,该算法可以处理不规则模型边界在任意形状毛坯中的排样,能有效地降低加工成本.     

Quantification model of proper curvature for large‐sized curved TVs

We present a feasible modeling method to estimate the proper curvature for large‐sized curved TVs. We especially focused on two factors – preference and perceived distortion – to be considered to determine the proper curvature. The preference includes a number of advantages that people expect to fulfill the possibilities of a more immersive image and sense of realism from curved display. On the other hand, the perceived distortion means the side effects that people can notice uncomfortable feeling caused by the shape of a curved one. In order to find out how two factors would be different as a number of conditions like curvature, size, and viewing angle change, a series of subjective assessments were conducted. The evaluation results show that both the preference and perceived distortion vary with the conditions considerably. We performed the statistical analysis based on the results and proposed the quantification model of proper curvature, which has higher preference and less perceived distortion, for various‐sized curved TVs.     

Coherent microscopy by laser optical feedback imaging (LOFI) technique

The application of the non-conventional imaging technique LOFI (laser optical feedback imaging) to coherent microscopy is presented. This simple and efficient technique using frequency-shifted optical feedback needs the sample to be scanned in order to obtain an image. The effects on magnitude and phase signals such as vignetting and field curvature occasioned by the scanning with galvanometric mirrors are discussed. A simple monitoring method based on phase images is proposed to find the optimal position of the scanner. Finally, some experimental results illustrating this technique are presented.     

确定河流生态流量的几种湿周法比较

为比较不同湿周法在计算河流生态流量中的适用性,采用幂函数描述无量纲化的湿周～流量关系,利用曲率法、斜率法及多目标评价法中的线性加权和法、理想点法(尺度系数r分别取1,2,∞)、乘除法等7种方法计算河流生态流量。结果表明:曲率法的结果偏小;斜率法、理想点法(r=1)、线性加权和法的结果相同,且位于各方法的中间;另外3种多目标评价方法得到的河流生态流量大于斜率法等的结果,但湿周的增加比例明显小于流量增加比例。在湿周～流量关系符合幂函数关系时,利用斜率法或理想点法(r=1)、线性加权和法确定河流生态流量的方法是适宜的。     

基于曲面曲率和RLDA的3D掌纹识别方法

提出一种新的3D掌纹识别方法,利用掌纹曲面的3D曲率信息提高当前2D掌纹识别算法的精确度和鲁棒性。首先因曲率是3维物体的重要表征,能够与视点无关地表现曲面的局部形状,不管手掌发生旋转或者平移,曲率信息都是稳定的,因此提取3D掌纹的均值曲面曲率特征来刻画3D掌纹的曲面特征;继而获得3D掌纹映射到2D空间上的灰度图像——均值曲率图像(MCI);然后在获得的MCI上采用正则化的LDA(RLDA)方法来进行二次特征抽取,以消除传统线性判别分析(LDA)应用于识别时存在的小样本问题和优化准则函数并不直接与识别率相关等问题。实验结果表明,所提出的方法相比与传统的LDA、PCA、ICA、LPP等方法有更高的精度和速度。     

基于局部曲面拟合的散乱点云简化方法

随着数据获取手段的进步,散乱点云数据在三维重建中获得越来越广泛的应用,然而庞大的数据量往往影响重建的效率。现有简化算法中采用的曲率计算方法精度不高,导致模型特征模糊。本文在分析曲面特征的基础上给出了一种曲面特征的定量描述方法。该方法采用局部曲面拟合得到曲面在一点处的近似曲面,然后用法曲率在360度范围内的平均值代替平均曲率来描述曲面在一点处的特征。简化时采用K-D树剖分点云数据,根据子节点所包含的采样点数、空间区域大小和曲面特征大小控制简化过程。实验结果表明,该方法能够更好地保持曲面的几何特征,从而证明了算法的有效性。     

Topological and Variational Properties of a Model for the Reconstruction of Three-Dimensional Transparent Images with Self-Occlusions

We introduce and study a two-dimensional variational model for the reconstruction of a smooth generic solid shape E, which may handle the self-occlusions and that can be considered as an improvement of the 2.1D sketch of Nitzberg and Mumford (Proceedings of the Third International Conference on Computer Vision, Osaka, 1990). We characterize from the topological viewpoint the apparent contour of E, namely, we characterize those planar graphs that are apparent contours of some shape E. This is the classical problem of recovering a three-dimensional layered shape from its apparent contour, which is of interest in theoretical computer vision. We make use of the so-called Huffman labeling (Machine Intelligence, vol. 6, Am. Elsevier, New York, 1971), see also the papers of Williams (Ph.D. Dissertation, 1994 and Int. J. Comput. Vis. 23:93–108, 1997) and the paper of Karpenko and Hughes (Preprint, 2006) for related results. Moreover, we show that if E and F are two shapes having the same apparent contour, then E and F differ by a global homeomorphism which is strictly increasing on each fiber along the direction of the eye of the observer. These two topological theorems allow to find the domain of the functional ℱ describing the model. Compactness, semicontinuity and relaxation properties of ℱ are then studied, as well as connections of our model with the problem of completion of hidden contours.

平均曲率运动的三种实现方案的比较研究

讨论了曲率运动演化方程的三种数值方案:离散中值滤波方案、显式水平集方案和半隐式水平集方案的原理与算法,并对它们的效率、精度以及旋转不变性等性能进行了对比实验研究.结果表明,半隐式加性算子分裂(AOS)算法相对于另两种方案性能上明显占优.