抽水蓄能电站施工现场安全文明施工三维策划应用研究

基于电网安全对稳定经济运行的重要作用,国家大力推进抽水蓄能电站的建设,"十三五"期间,将进入抽水蓄能电站建设高峰期,抽水蓄能电站施工现场点多面广,基建安全形势严峻,施工现场的安全是工程管理的核心因素[1].为了提升现场安全文明施工管理水平,其核心在于施工现场安全文明施工策划,策划的水平和可操作性决定了建筑施工过程中的安全管理的成效,而行之有效的策划应用模式成为关键.本文结合山东文登抽水蓄能电站安全文明施工三维策划管理及三维策划系统应用,解决了现有安全文明施工策划、现场安全布置、安全设施标准化等环节的局限性及不足,实现了策划的高效快捷、效果直观真切,探索出了安全文明施工策划应用的新途径.     

基于修正幂律模型流体的柳叶形扶正器旋流规律及应用

为提高注水泥过程中水泥浆顶替效率，国内外愈来愈多地使用旋流扶正器。但是，目前旋流扶正器结构参数主要靠经验设计，缺乏理论基础也没有相关行业标准。针对依据文丘里效应设计的柳叶形旋流扶正器，基于修正幂律流体模型，构建了旋流扶正器旋流长度计算模型。通过数值模拟对旋流扶正器井下旋流规律进行研究，推导出了旋流扶正器在修正幂律流体条件下，周向平均速度和完全顶替的临界速度公式。基于旋流扶正器井下旋流规律，分析了井眼环空结构、流体性能、井下井壁附着力对水泥浆顶替效率的影响，优化了柳叶形旋流扶正器旋流角、扶正棱长度、扶正棱有效体积和扶正器高度等设计参数。对比分析了柳叶形与常规旋流扶正器在不同工况下的旋流长度，柳叶形扶正器的旋流长度比常规扇形平均提升了32%，比常规梯形扶正器平均提升了47%。柳叶形扶正器在新疆顺北油田顺北3井等20多井次超深井应用，应用井固井质量明显优于常规扇形的旋流扶正器。     

An intelligent EGWO-SCA-CS algorithm for PSS parameter tuning under system uncertainties

This paper proposes a novel hybrid technique called enhanced grey wolf optimization-sine cosine algorithm-cuckoo search (EGWO-SCA-CS) algorithm to improve the electrical power system stability. The proposed method comprises of a popular grey wolf optimization (GWO) in an enhanced and hybrid form. It embraces the well-balanced exploration and exploitation using the cuckoo search (CS) algorithm and enhanced search capability through the sine cosine algorithm (SCA) to elude the stuck to the local optima. The proposed technique is validated with the 23 benchmark functions and compared with state-of-the-art methods. The benchmark functions consist of unimodal, multimodal function from which the best suitability of the proposed technique can be identified. The robustness analysis also presented with the proposed method through boxplot, and a detailed statistical analysis is performed for a set of 30 individual runs. From the inferences gathered from the benchmark functions, the proposed technique is applied to the stability problem of a power system, which is heavily stressed with the nonlinear variation of the load and thereby operating conditions. The dynamics of power system components have been considered for the mathematical model of a multimachine system, and multiobjective function has been framed in tuning the optimal controller parameters. The effectiveness of the proposed algorithm has been assessed by considering two case studies, namely, (i) the optimal controller parameter tuning, and (ii) the coordination of oscillation damping devices in the power system stability enhancement. In the first case study, the power system stabilizer (PSS) is considered as a controller, and a self-clearing three-phase fault is considered as the system uncertainty. In contrast, static synchronous compensator (STATCOM) and PSS are considered as controllers to be coordinated, and perturbation in the system states as uncertainty in the second case study.     

垂直轴风力机两种翼型气动性能比较研究

叶片是风力机最重要的组成部分,在不同的风能资源情况下,翼型的选择对垂直轴风力机气动特性有着重要的影响。文章分别以NACA0018翼型(对称翼型)和NACA4418翼型(非对称翼型)建立3叶片H型垂直轴风力机二维仿真模型。应用数值模拟的研究方法,从功率系数、单个叶片切向力系数等方面比较两种风力机模型在不同叶尖速比下的气动特性,并采用风洞实验数据验证了流场计算的准确性。CFD计算结果表明:在低叶尖速比下,NACA4418翼型风力机气动特性优于NACA0018翼型风力机,适用于低风速区域;在高叶尖速比下,NACA0018翼型风力机气动特性较好,适用于高风速地区。而且在高叶尖速比时,NACA0018翼型在上风区时,切向力系数平均值要高于NACA4418翼型,在下风区时,NACA418翼型切向力系数平均值高。该研究可为小型垂直轴风力机翼型的选择提供参考。     

Optimal supplementary frequency controller design using the wind farm frequency model and controller parameters stability region

In most of the existing studies, the frequency response in the variable speed wind turbines (VSWTs) is simply realized by changing the torque set-point via appropriate inputs such as frequency deviations signal. However, effective dynamics and systematic process design have not been comprehensively discussed yet. Accordingly, this paper proposes a proportional-derivative frequency controller and investigates its performance in a wind farm consisting of several VSWTs. A band-pass filter is deployed before the proposed controller to avoid responding to either steady state frequency deviations or high rate of change of frequency. To design the controller, the frequency model of the wind farm is first characterized. The proposed controller is then designed based on the obtained open loop system. The stability region associated with the controller parameters is analytically determined by decomposing the closed-loop system's characteristic polynomial into the odd and even parts. The performance of the proposed controller is evaluated through extensive simulations in MATLAB/Simulink environment in a power system comprising a high penetration of VSWTs equipped with the proposed controller. Finally, based on the obtained feasible area and appropriate objective function, the optimal values associated with the controller parameters are determined using the genetic algorithm (GA).     

非调制双色红外测温误差实时补偿方法研究

针对环境温度变化对双色红外测温准确度的影响,基于双色比色红外测温原理,分析了非调制双色红外测温的误差来源,提出一种新的快门式非调制双色红外测温方法。在光路中增加快门及其控制模块,控制快门闭合,将测得系统偏移作为补偿项,补偿实际测温时因温度变化给测量带来的误差。仿真结果表明,在600～1 100℃的测温范围内,长时间使用的无快门非调制红外双色测温的精度严重劣化,而快门式非调制双色红外测温的准确度大幅提高,可达到±0.5%。     

Design of Feedback Shift Register of Against Power Analysis Attack

Stream ciphers based on linear feedback shift register (LFSR) are suitable for constrained environments, such as satellite communications, radio frequency identification devices tag, sensor networks and Internet of Things, due to its simple hardware structures, high speed encryption and lower power consumption. LFSR, as a cryptographic primitive, has been used to generate a maximum period sequence. Because the switching of the status bits is regular, the power consumption of the LFSR is correlated in a linear way. As a result, the power consumption characteristics of stream cipher based on LFSR are vulnerable to leaking initialization vectors under the power attacks. In this paper, a new design of LFSR against power attacks is proposed. The power consumption characteristics of LFSR can be masked by using an additional LFSR and confused by adding a new filter Boolean function and a flip-flop. The design method has been implemented easily by circuits in this new design in comparison with the others.     

选区激光熔化工艺参数对气雾化316L不锈钢粉末成形制品性能的影响

本研究系统考察了激光功率和扫描速度对316L不锈钢粉末选区激光熔化工艺成形熔道、制品微观组织及力学性能的影响,并分析了各类缺陷的形成原因。研究结果表明:在低激光功率和高扫描速度条件下,熔道中出现了大量球状颗粒,这些颗粒之间的空隙恶化了下一层粉末的熔化条件,这正是成形制品中熔道分布混乱以及孔洞、裂纹产生的根本原因,进而导致成形制品力学性能降低;在高激光功率和低扫描速度条件下,熔池快速升温/冷却的热应力作用增强,使得成形制品的熔道交界处也存在孔洞和裂纹等缺陷。在本研究实验条件下,激光功率为350 W,扫描速度为1750 mm/s时,SLM成形制品的力学性能最为优异,其中抗拉强度为731 MPa、屈服强度为638 MPa、断后伸长率为40.0%,致密度为96.27%。     

基于改进雷达图的配电系统电能质量评估方法

本文针对配电系统电能质量综合评估存在的评估指标权重分配过于主观或客观的问题,提出一种基于改进雷达图法的配电系统电能质量评估方法。该方法利用最小偏差组合权重法计算各评估指标的最优组合权重。并在传统雷达图的基础上对各指标轴间夹角值的确定和特征向量的选取两方面做了进一步的改进。首先采用扇形区域取代原始的三角形区域,并利用最小偏差组合权重法计算各指标轴间夹角值。其次选择新的特征向量构造评估函数对配电系统电能质量进行综合评估。最后通过对某钢铁厂棒材变电站10kV配电系统电能质量进行综合评估,验证了该方法的可行性和合理性。较传统雷达图而言,改进雷达图法解决了传统雷达图法中各指标间信息共用以及评估结果不唯一的问题,使评估结果更加准确合理。     

Stabilizing temperature-capacitance dependence of (Sr,Pb, Bi)TiO3-Bi4Ti3O12 solutions for energy storage

(1-x)Sr_0.7Pb_0.15Bi_0.1TiO₃-xBi₄Ti₃O₁₂ ((1-x)SPBT-xBIT, x = 0-0.125) bulk ceramics were developed and calcined via the solid-state method, aimed at the application of pulsed power capacitors. The phase structures, temperature stability, hysteresis loop, and discharge properties were systematically investigated. Considering both the temperature stability and dielectric properties, 0.925SPBT-0.075BIT bulk ceramics with a capacitance variation satisfying the X7R specification were developed for pulsed power capacitors. The energy storage density was 0.252 J/cm³, and the ceramics showed high temperature stability at 80 kV/cm. The discharge current waveforms of the 0.925SPBT-0.075BIT ceramics were recorded. A high discharge power density of approximately 1.01 × 10⁸ W/kg with an 8 Ω load resistor and short discharge period of 84 ns were achieved at 50 kV/cm. The good temperature stability properties and high power density show that the 0.925SPBT-0.075BIT ceramics are well suited for pulsed power capacitors with a wide temperature range.