用次灵敏线原子吸收光谱法测定镍精粉中高含量的镍

研究了采用镍305.1nm次灵敏线测定镍精粉中高含量镍的分析条件,样品经三酸溶解后,定容到一定体积,可不经稀释直接用原子吸收光谱法测定。此法简便、快速、精密度和准确度良好,用于镍精粉及低冰镍中高含量镍的测定,结果满意。     

Spin Dependent Hopping in Ti Doped La0.67 Ca0.33 MnO3

A systematic investigation of the magnetic and transport properties of Ti doped La0.67Ca0.33MnO3 was reported. The Ti substitution for Mn ions results in a reduction in ferromagnetism and conductivity. The metal-insulator transition temperature is close to Curie temperature which decreases from 274 to 82 K as x increases from 0 to 0.17. The most important effect of Ti doping is to introduce spin clusters in the samples due to the distortion of local lattice and the inhomogeneous magnetic structure induced primarily by the random distribution of Mn ions. A maximum magnetoresistance ratio as large as 90% in 1 T at 122 K was obtained for the sample with x =0. 055, which is four times larger than that obtained for LCMO sample at 272 K. There is a remarkable field-history dependent MR in the cooling process for the doped samples while such phenomenon disappears in the warming run. The resistivity follows well the variable range hopping behavior in paramagnetic state. Both the size effect and spin dependent hopping of carriers between the spin clusters should be considered in this system.     

钛精矿回转窑直接还原过程结圈可能性的探讨

通过煤种，入窑球冷态强度和还原过程强度，以及钛精矿与煤灰混合物的软化温度等分析探讨了钛精矿预热球团回转窑直接还原产生结圈的可能性，获得了可以避免结圈的结论。     

钛制设备在焦化行业中的应用

介绍焦化行业钛设备的应用,剖析了分块式钛泡罩塔盘的结构特点,并对其经济性作了分析。     

钛制硬盘的特性

谐振性能和阻尼性能可调节。随TiN层的不同厚度调节盘片的谐振峰值，适应不同的转速，降低磁道记录失真，提高硬盘性能。     

TA2钛管电接触式退火工艺研究

采用电接触式快速加热法对TA2纯钛管材大气下退火的可行性及工艺进行了尝试,试验证明,采用该方式在1min～2min内将管坯加热至700℃～800℃,保温1min所获得的再结晶组织与力学性能与常规真空退火的相当,满足纯钛管材国标力学性能要求.其管材表面氧化轻微,对酸洗及刮修难度无影响.管材可进行较大变形量的后续加工,达到了中间及成品退火的目的.