Determination of industrial pollution effects on citrus honeys with chemometric approach

The aim of this study was to determine the levels of essential, trace and toxic elements, such as K, Ca, Fe, Cu, Al, Ni, Sn, Pb and Cd in citrus honeys from different regions (industrialized and nonindustrialized) of Hatay, Turkey. K, Ca, Na and Mg were the most abundant elements, with mean contents of 363.5, 256.6, 88.1 and 37.7 mg/kg, respectively. The trace element mean contents ranged between 0.032 and 15.58 mg/kg. Significant differences in Fe, Cu, Al, Ni, Sn, Pb, Cd, Co and Sr levels were observed between two different regions. The findings that Fe, Cu, Al, Ni, Sn, Pb, Cd, Co and Sr contents in citrus honeys from industrialized regions were higher than citrus honeys from non-industrialized regions indicate that the honeys were affected by industrial pollution. Chemometric methods were applied to classify honey according to mineral content. Cluster analysis showed three clusters corresponding to the three different regions.     

On the mechanics of functional asymmetry in bipedal walking

This paper uses two symmetrical models, the passive compass-gait biped and a five-link 3-D biped, to computationally investigate the cause and function of gait asymmetry. We show that for a range of slope angles during passive 2-D walking and mass distributions during controlled 3-D walking, these models have asymmetric walking patterns between the left and right legs due to the phenomenon of spontaneous symmetry-breaking. In both cases a stable asymmetric family of gaits emerges from a symmetric family of gaits as the total energy increases (e.g., fast speeds). The ground reaction forces of each leg reflect different roles, roughly corresponding to support, propulsion, and motion control as proposed by the hypothesis of functional asymmetry in able-bodied human walking. These results suggest that body mechanics, independent of neurophysiological mechanisms such as leg dominance, may contribute to able-bodied gait asymmetry.     

FEM modeling of SAR distribution and temperature increase in human brain from RF exposure

The assessment of radiofrequency exposure level and the exposure setup are critical, because if the exposure levels (related to frequency, power, position, and other variables) are not known, the biological results are not meaningful. In this regard, this study aims to design, implement, and analyze numerical setups for the simulations of radiofrequency exposure related specific absorption rate and temperature increase in the human brain and head. For this purpose, specific models for human head and telephone antenna are chosen, and the FEM is selected for solving PDEs related to electromagnetic wave equations and bioheat equation. After the verification of the methodology chosen by achieving comparable results with the literature, the scope of the study is then turned to the effects of different parameters on the exposure levels. In the end, comprehensive information can be obtained from the simulation results so that risk management policies for electromagnetic radiation can be reevaluated to minimize the possible health hazards. Copyright © 2012 John Wiley & Sons, Ltd.     

Vacuum-processed polyethylene as a dielectric for low operating voltage organic field effect transistors

We report on the fabrication and performance of vacuum-processed organic field effect transistors utilizing evaporated low-density polyethylene (LD-PE) as a dielectric layer. With C₆₀ as the organic semiconductor, we demonstrate low operating voltage transistors with field effect mobilities in excess of 4 cm²/Vs. Devices with pentacene showed a mobility of 0.16 cm²/Vs. Devices using tyrian Purple as semiconductor show low-voltage ambipolar operation with equal electron and hole mobilities of ～0.3 cm²/Vs. These devices demonstrate low hysteresis and operational stability over at least several months. Grazing-angle infrared spectroscopy of evaporated thin films shows that the structure of the polyethylene is similar to solution-cast films. We report also on the morphological and dielectric properties of these films. Our experiments demonstrate that polyethylene is a stable dielectric supporting both hole and electron channels.     

Enhancing impedance imaging through multimodal tomography

Several noninvasive modalities including electrical impedance tomography (EIT), magnetic induction tomography (MIT), and induced-current EIT (ICEIT) have been developed for imaging the electrical conductivity distribution within a human body. Although these modalities differ in how the excitation and detection circuitry (electrodes or coils) are implemented, they share a number of common principles not only within the image reconstruction approaches but also with respect to the basic principle of generating a current density distribution inside a body and recording the resultant electric fields. In this paper, we are interested in comparing differences between these modalities and in theoretically understanding the compromises involved, despite the increased hardware cost and complexity that such a multimodal system brings along. To systematically assess the merits of combining data, we performed 3-D simulations for each modality and for the multimodal system by combining all available data. The normalized sensitivity matrices were computed for each modality based on the finite element method, and singular value decomposition was performed on the resultant matrices. We used both global and regional quality measures to evaluate and compare different modalities. This study has shown that the condition number of the sensitivity matrix obtained from the multimodal tomography with 16-electrode and 16-coil is much lower than the condition number produced in the conventional 16-channel EIT and MIT systems, and thus, produced promising results in terms of image stability. An improvement of about 20% in image resolution can be achieved considering feasible signal-to-noise ratio levels.     

Control of buoyancy-induced temperature and flow fields with an embedded adiabatic thin plate in porous triangular cavities

Natural convection has been performed in an insulated horizontally thin plate embedded in a triangular enclosure filled with fluid saturated porous medium, numerically. Bottom and inclined wall of triangular enclosure are isothermally heated and cooled, respectively. Vertical wall of enclosure is adiabatic. Steady, two-dimensional, laminar governing equations, which are written with Darcy model, were solved with finite-difference method. Calculations are conducted for different lengths and locations of thin plate, different aspect ratios, and Darcy-modified Rayleigh number. Prandtl number was chosen as 0.71. It is observed that the change on plate location in vertical and horizontal axes makes small effect on heat transfer; however flow field and temperature distribution strongly affected from these parameters.     

Natural convection in a vertically divided square enclosure by a solid partition into air and water regions

Numerical analyses of the flow and heat transfer due to buoyancy forces in a square enclosure divided by an impermeable partition between air and water filled chests were carried out using a finite difference technique. The enclosure was heated from left wall and cooled from right, isothermally. Horizontal walls were adiabatic. The partition divided the enclosure into air and water regions. Thus, two cases were examined: left side of partition was filled with air and right side was filled with water (Case I, air-partition-water) and left side was filled with water and right side with air (Case II, water-partition-air). Epoxy was chosen as partition material. Results were obtained for different Grashof numbers (10³  Gr  10⁶), thickness of the partition (0.05  ε  0.2) and location of the partition (0.25  c  0.75). An analytical treatment has been performed for low Grashof numbers. Numerical and analytical results gave an acceptable agreement. It was found that filling of fluid into chests is important for obtaining maximum heat transfer and energy saving. When left chest was filled with air (Case I), higher heat transfer was formed. It was an interesting result that heat transfer decreased with increasing of location of the partition for all values of partition thickness at Case I. On the contrary, heat transfer was a decreasing function of increasing value of location of the partition.     

Entropy production due to free convection in partially heated isosceles triangular enclosures

A numerical analysis of the entropy production has been performed due to natural convection heat transfer and fluid flow in isosceles triangular enclosures with partially heated from below and symmetrically cooled from sloping walls. Governing equations are solved by finite difference method. Governing parameters on flow and temperature fields are Rayleigh number (10³  Ra  8.8 × 10⁵), dimensionless length of heater (0.25  (ℓ′ = ℓ/L)  1.0), dimensionless location of heater (0.25  (c′ = c/L)  0.75) and inclination angle of slopping walls (30°  β  60°). Heat transfer results are presented in terms of local and mean Nusselt numbers (Nu) while entropy production results are shown with entropy production number (N_s) and Bejan number (Be). Isotherms, streamlines, contours of entropy production due to heat transfer and fluid friction irreversibility are plotted. It is observed that entropy production number increases but Bejan number decreases with increasing of Rayleigh number. However, both entropy production due to heat transfer and fluid friction irreversibility are affected by higher inclination angle of triangle and length of heater.     

Visualization of natural convection heat transport using heatline method in porous non-isothermally heated triangular cavity

Natural convection heat transfer in a porous media filled and non-isothermally heated from the bottom wall of triangular enclosure is analyzed using finite difference technique. Darcy law was used to write equations of porous media. Dimensionless heatfunction was used to visualize the heat transport due to buoyancy forces. Three different boundary conditions were applied for the vertical and inclined boundaries of triangular enclosures as Case I; both vertical and inclined walls were isothermal, Case II; vertical wall was adiabatic and inclined one was isothermal, Case III; vertical wall is isothermal and inclined one is adiabatic. A cosine function was utilized to get non-isothermal wall condition. The study was performed for different aspect ratios (0.25 ? AR ? 1.0) and Darcy-modified Rayleigh numbers (100 ? Ra ? 1000). It was observed that heat transfer enhancement was formed when vertical and inclined walls were isothermal while bottom wall was at non-uniform temperature. Heat transfer from bottom wall did not vary when the value of aspect ratio was higher than 0.50. In addition, heatline visualization technique was a useful technique for non-isothermally heated and porous media filled triangular enclosures.     

Natural convection flow in porous enclosures with heating and cooling on adjacent walls and divided by a triangular massive partition

The problem of steady, laminar, natural convection flow in a porous enclosure divided by a triangular massive partition has been formulated. The massive triangular partition is a solid adiabatic body which is located to the right and top wall. Bottom and left vertical wall of porous enclosure are isothermally heated and cooled, respectively. Remaining wall is adiabatic. Governing equations using Darcy model are solved numerically by the finite-difference method and the Successive Under Relaxation (SUR) technique is used to solve linear algebraic equations. Thanks to massive partition, two different enclosure are formed, depends on dimensions of the triangular body, as triangle and trapezoidal. Flow patterns and temperature distributions were presented at different aspect ratios (0 ≤ AR ≤ 1) and Rayleigh numbers (100 ≤ Ra ≤ 1000). Results are given for different aspect ratios (AR) for AR = 0, 0.25, 0.50, 0.75 and 1. A parametric study is conducted and a set of representative results for flow and temperature characteristics are presented and discussed.