Adsorption of dithiophosphate and dithiophosphinate on chalcopyrite

Electrochemical behavior of chalcopyrite was investigated in the absence and presence of dithiophosphate (DTP) and dithiophosphinate (DTPI), selective thiols against Fe-sulfides in the flotation of sulfide ores, in potentiostatically controlled electrochemical condition. Diffuse reflectance Fourier transformation (DRIFT) spectroscopy was applied to determine the type of adsorbed collector species, and Hallimond tube flotation tests were performed to clarify the role of polarization potential and thiol collectors on the floatability of chalcopyrite. DRIFT spectroscopy study proposed that dithiolate of DTP, (DTP)₂, was the major surface compound formed under oxidizing potentials in slightly acidic and neutral conditions. However, DTP species formed on mineral surface in alkaline condition could not be determined possibly due to heavy surface coating of metal oxyhydroxides. DTPI species formed on chalcopyrite was found to be in the form of CuDTPI + (DTPI)₂. Additionally, presence of adsorbed DTPI, DTPI⁰, was also detected. Self-induced floatability was significantly high particularly in slightly acidic condition and decreased by increasing pH due to surface coating of metal oxyhydroxides. Addition of both collectors improved the flotation performance at all pH values. However, the positive effect of DTP at high alkaline pH values was lower than that of DTPI. This was attributed to weak collecting property and lower hydrocarbon chain length of DTP compared to DTPI. Effect of pulp potential could not be observed in slightly acidic condition, but it became apparent at higher pHs. Although better flotation responses were obtained in mildly oxidizing potentials, both collectors enlarged the floatability potential range of chalcopyrite.     

导电胶的研究进展

目的 综述电子封装中用于代替锡铅焊料的导电胶的研究进展,对导电胶未来研究方向进行展望,为导电胶的应用提供参考。方法 从导电胶的组成、导电机理、类型入手,重点介绍导电胶应用时的关键性能要求与测试方法,并总结近几年在提高导电性、稳定性及降低固化温度、成本等方面的研究进展。结果 对导电胶中基体树脂进行改性并选择合适的导电填料(形状、组成),可改善导电胶的固化条件,并提高导电胶的导电性能、黏结性能、耐久性,满足苛刻应用环境下对器件连接高可靠性的要求。结论 相比传统铅锡焊料焊接的方式,导电胶具有绿色环保、连接温度低、分辨率高等特点。因此导电胶适用于电子封装与智能包装领域。目前导电胶的研究方向主要为提高导电性、黏结强度以及黏结稳定性。但是在面对固化时间长、耐湿热性弱、成本较高等缺点时,仍需不断优化组成,以满足实际应用要求。     

基于分子动力学的丝网印刷柔性传感器电极导电性机理研究

目的 研究提高丝网印刷柔性传感器电极的导电性,为提升柔性传感器的电学性能提供参考依据。方法 首先采用分子动力学（Molecular Dynamic,MD）模拟方法,建立在Wenzel模型下导电银浆团簇在不同粗糙因子下的对苯二甲酸乙二醇酯（Polyethylene Terephthalate,PET）表面铺展的分子动力学模型,其次分别计算各体系下的结合能,用以表征不同体系下PET表面对导电银浆团簇结合能力,接下来通过丝网印刷实验的方法探究银浆与不同粗糙因子PET的结合能力对传感器电极的导电性的影响。结果 仿真结果表明,导电银浆团簇在不同粗糙因子的PET表面的铺展过程中会陷入粗糙表面的凹陷处,且导电银浆与基材的结合能随着PET粗糙因子的增加而增加。实验结果表明,使用不同粗糙因子的PET作为承印物能显著提升电极的导电性。相比于未处理的PET,随着粗糙因子的增加,导电线条的电导率逐渐升高,电阻率逐渐降低,方块电阻逐渐降低。电导率最大提升了77%,电阻率最大下降了43%,方块电阻最大下降了38%。结论 导电银浆在粗糙表面铺展的过程中会渗入基材的凹陷处,增加了吸附点位,使得银浆与基材的结合更加紧密...     

高功率脉冲磁控溅射制备ZnO薄膜的研究进展

氧化锌薄膜材料由于具有高电导率、良好的光学透过率、原料储存丰富、成本低廉的特点,被认为是最具有潜力的透明导电薄膜.特别是其宽禁带(3.37eV)和高达60meV的激子束缚能,使其在环境温度制备同质结发光器件、太阳能电池电子传输层具有巨大的应用前景.然而,传统制备方法难以实现薄膜质量的综合调控,存在p-ZnO稳定性差、制...     

多电平高压变频中的波形调制方法

本文从调制波变换方法和载波调制技术两个方面介绍了高压变频中常用的一些波形调制方法。同时提出了一种新的波形变换方式——波形连续变换技术（continuous Waveform Modulation,CWM）,最后给出了实际高压变频装置采用CWM技术的输出相电压波形。     

基于J2EE的终端测试管理系统的设计与实现

根据当前中国移动公司终端测试管理业务的需求,通过对业务需求和J2EE规范体系架构的分析和讨论,提出了一个以J2EE为基础、结合MVC设计模型构建终端测试管理平台的方案。分析和建立了系统的功能模型、层次结构,分析了两个关键技术:建立测试任务分配模型和XML报表模型,最后阐述了系统关键技术的实现方法。     

基于光谱分类模型的保险杠物证无损研究

采用中红外光谱结合化学计量学的方法对车用保险杠碎片进行鉴别,分别对52个车用保险杠碎片样本的全波段光谱数据、指纹区光谱数据和主成分分析降维后的光谱数据建立Fisher判别分析和K近邻算法2种分类模型,并对分类结果进行比较。结果表明,主成分分析提取特征变量后构建的分类模型,分类的准确率更高,对聚丙烯（PP）、PP/滑石粉、PP/滑石粉/碳酸钙（CaCO₃）3种类型的样本分类准确率达到92.3 %,对PP/滑石粉类型中的10种品牌样本分类准确率达到88.9 %,分类结果理想;在构建的2种分类模型中,Fisher判别分析模型的分类率远高于K近邻算法模型,分析认为K近邻算法模型受到样本不均衡的影响;中红外光谱结合化学计量学可以实现对车用保险杠碎片的准确区分,且满足快速、无损的检验要求。     

超长无缝施工技术在某大厦地下工程中的应用

介绍了某大厦地下室的底板及侧墙在施工过程中的一些经验,该工程通过采用补偿收缩混凝土技术,实现超长钢筋混凝土结构连续浇注施工,不仅提高了结构的整体性,而且保证了工程质量,加快了施工进度,取得了良好的经济效益。     

Dielectric properties and impedance analysis of BaTiO3-based ceramics with core-shell structure

In this paper, a core-shell structure, where the BaTiO₃ (BT) particles were coated with 0.25Bi(Zn_1/2Ti_1/2)O₃-0.75BaTiO₃ [BT@x(0.25BZT-0.75BT)] by sol-gel method, was fabricated and confirmed by transmission electron microscopy (TEM). The impedance data of BT, 0.25BZT-0.75BT and BT@x(0.25BZT-0.75BT) (x=0.5–1.0) ceramics was collected and fitted by different equivalent circuits. The core and shell regions of BT@x(0.25BZT-0.75BT) (x=0.5–1.0) ceramics can be separated in complex impedance plots (fitted by a 4RC equivalent circuit), according to the activation energies of BT and 0.25BZT-0.75BT. The calculated activation energy of the core part in BT@x(0.25BZT-0.75BT) ceramics is relatively stable, being closer to the activation energy (0.86 eV) of BT, while the activation energy of the shell was found to increase from 0.28 eV to 0.53 eV with increasing the shell thickness. The average core/shell ratio (d_gc/d_gs) for BT@0.8(0.25BZT-0.75BT) ceramics was found to be on the order of 7.26, calculated by a modified two-layer dielectric model. In addition, Lichtenecker formula was used to simulate the dielectric constant of BT@0.8(0.25BZT-0.75BT) ceramics at room temperature and the simulated results are in agreement with the measured values.     

控制内应力减少套圈变形

轴承套圈热处理后在组织、硬度合格的前提下,控制热应力和组织应力,调整热处理工艺参数,压缩椭圆度,可以降低磨加工留量,提高生产效率,降低成本。