萝卜硫素介导Akt/p70S6K信号传导诱导人鼻咽癌CNE-2细胞凋亡

目的:研究萝卜硫素对人鼻咽癌CNE-2细胞增殖、凋亡的影响及其对Akt/p70S6K信号传导的作用。方法:采用CCK-8实验分析萝卜硫素对CNE-2细胞生长增殖的影响，流式细胞仪检测萝卜硫素对CNE-2细胞凋亡率及细胞周期分布的影响，Western blot技术检测CNE-2细胞中调控细胞周期的相关蛋白及Akt/p70S6K信号通路关键蛋白的表达水平。结果:采用萝卜硫素干预CNE-2细胞后，细胞增殖抑制率及凋亡率相对于对照组呈浓度依赖的方式显著增高，差异有统计学意义（P<0.05）；流式细胞仪分析提示，萝卜硫素干预能够将细胞停留在S期及G2/M期，并且萝卜硫素还能抑制细胞周期蛋白Cyclin A、Cyclin B、Cyclin D、Cyclin E以及CDK/p34的表达水平，与对照组相比差异有统计学意义（P<0.05）；此外，萝卜硫素还能抑制Akt/p70S6K信号通路关键蛋白p-Akt及p70S6K蛋白表达水平（P<0.05），但萝卜硫素与Akt激动剂IGF-I共同处理细胞后，上述蛋白表达量与对照组相比没有统计学差异（P>0.05）。结论:萝卜硫素可能通过干扰CNE-2细胞中Akt/p70S6K信号传导而发挥有效的抗增殖及促凋亡的作用。     

3-羟基-4-吡啶酮类螯合剂在镓放射性药物中的 研究进展及展望

目前，在肿瘤等重大疾病的早期诊断中，PET/CT（或PET/MRI）是灵敏度最高、分辨率最好的医学影像手段。PET/CT（或PET/MRI）依赖于PET药物，很大程度上依赖于¹⁸F PET药物。然而，随着世界上第一个⁶⁸Ga药物（⁶⁸Ga-DOTATATE）获得美国FDA批准进入市场，⁶⁸Ga及其药物的研究正受到越来越多的关注。本文首先介绍了镓的基本核性质和化学性质，然后提出了金属双功能螯合剂的设计要求，并讨论了一些常用镓螯合剂的优缺点。由于3-羟基-4-吡啶酮基团对三价镓离子具有高的亲和力和选择性，因此，特别重点关注了3-羟基-4-吡啶酮多齿螯合剂在镓放射性药物中的最新研究进展。最后，还对3-羟基-4-吡啶酮多齿螯合剂在镓放射性药物中的应用前景进行了展望。     

两种3D打印用雾化Ti-6Al-4V粉末的对比研究

本研究分别利用水冷铜坩埚真空感应熔炼气雾化(VIGA-CC)和等离子旋转电极(PREP)两种技术制备出球形Ti-6Al-4V合金粉末,作者利用SEM、同步辐射CT扫描-三维重建和氩气含量测试等分析手段对不同粒径的Ti-6Al-4V合金粉末的孔洞缺陷和氩气含量、硬度值进行了表征。实验结果表明, VIGA-CC粉末粒度分布宽,细粉收得率较多,粉末粒度分布在40~180 μm之间, PREP粉末的粒度分布较窄,主要集中在110~180 μm之间；金属粉末内部的孔隙率、气体含量和孔尺寸随着粉末粒度的增大而增大,且同一粒径范围内VIGA-CC粉末的气孔概率多于PREP粉末；随着粉末粒径减小,粉末截面组织逐渐细化,其硬度值逐渐升高,整体上VIGA-CC粉末硬度值高于PREP粉末。     

Corrosion behavior of under‐, peak‐, and over‐aged 6063 alloy: A comparative study

The mechanical property of age‐hardenable Al‐alloys is governed by the state of ageing, which determines the microstructure and consequently, their corrosion behavior which is a vital aspect for a number of applications. This article presents a comparative assessment of corrosion behavior of under‐, peak‐ and over‐aged Al‐Mg‐Si alloy. Corrosion characteristics have been determined via immersion tests in 0.1 M ortho‐phosphoric acid solution and intergranular corrosion (IGC) tests. Corroded surfaces are examined by field emission scanning electron micrographs‐energy dispersive spectroscopy and 3D optical profilometer. The obtained results reveal that the corrosion rate at a specific immersion time as well as the depth of IGC increases in the order for under‐, peak‐, and over‐aged states. Irrespective of the state of ageing, corrosion loss increases linearly but the rate of corrosion decreases rapidly with increasing immersion time. The dominant mode of corrosion in under‐aged alloy is identified as localized pitting, while peak‐aged is highly susceptible to IGC in contrast extensive pitting corrosion is observed for over‐aged alloy. The observed differences in corrosion behavior are explained considering characteristics of precipitates. Formation of β (Mg₂Si) in case of over‐aged alloy and presence of inclusions like AlFeMnSi particles are found to accelerate pitting corrosion.     

2-Phenyloxazole-4-carboxamide as a Scaffold for Selective Inhibition of Human Monoamine Oxidase B

A series of 2-phenyloxazoles bearing an amide group at position 4 were designed and synthesized for evaluation as potential inhibitors of human recombinant monoamine oxidases (hrMAOs). Results of kinetics experiments demonstrated that all compounds behave as competitive MAO inhibitors, with good selectivity toward the MAO-B isoform. The most potent and selective derivatives are characterized by inhibition constant (K_i) values in the sub-micromolar range and a good selectivity index (K_{i MAO-A}/K_{i MAO-B}>50). Some derivatives were also found to be able to inhibit MAO activity in nerve growth factor (NGF)-differentiated PC12 cells, taken as a model of neuronal cells. In particular, 2-(2-hydroxyphenyl)-N-phenyloxazole-4-carboxamide (compound 4 a ) may be a promising new scaffold, exerting the highest selectivity and inhibitory effect toward MAOs in NGF-differentiated PC12 cell lysates, without compromising cell viability. Molecular docking analysis allowed a rationalization of the experimentally observed binding affinity and selectivity.     

控轧控冷中碳非调质钢的高周疲劳性能

 采用中碳非调质钢制造的轴类等零件常承受交变载荷，因而对钢材疲劳性能具有高的要求。为了评估控轧控冷工艺生产的非调质钢棒材的疲劳性能，利用旋转弯曲疲劳试验机研究了一种常用的钒微合金化中碳非调质钢38MnVS及对比钢38MnS的高周疲劳性能。结果表明，与38MnS钢相比，38MnVS钢中铁素体体积分数增加，组织明显细化；相分析表明约有54%的钒处于M（C，N）相中，且尺寸小于10 nm的M（C，N）粒子质量分数为32%，这些细小粒子的析出强化增量约为116 MPa。38MnVS钢的疲劳极限较38MnS钢提高了62 MPa，提高幅度约为18%；疲劳极限比从38MnS钢的0.43提高到38MnVS钢的0.48。M（C，N）相的析出强化及组织细化是38MnVS钢较38MnS钢具有优异疲劳性能的主要原因，但其疲劳性能仍低于锻态非调质钢。根据试验结果及文献数据，给出了预测铁素体＋珠光体型非调质钢疲劳极限的简便方法。