Effects of winding connections on characteristics of a five‐phase stepping motor

A method for calculating the single‐step response of five‐phase hybrid stepping motors is obtained. The effects of winding connecting methods—(1) star‐bipolar SB, (2) pentagon PD, and (3) new pentagon NP—on the single‐step response are investigated. By application of the above calculation method, the continuous rotating characteristics are studied. It is found that the maximum slewing pulse rate of NP is higher than that of SB and PD connections, and that the variation of the rotor speed at high speed with the SB and PD connections is larger than that with the NP connection. The effects of the current waveform on the oscillation characteristics and relations between the current waveform and the winding connections are investigated. © 2001 Scripta Technica, Electr Eng Jpn, 136(1): 47–56, 2001     

Antioxidant activity and constituents of propolis collected in various areas of China

Propolis is a resinous substance collected by honeybees from various plant sources. The composition of propolis depends on time, vegetation, and the area of collection. This study examined the antioxidant activity of propolis from various areas of China: Heilongjiang, Neimongol, Hebei, Shandong, Shanxi, Gansu, Henan, Hubei, Sichuan, Hunan, Yunnan and Hainan. Ethanol extracts of propolis (EEP) were prepared and evaluated for their antioxidant activities by β-carotene bleaching, 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical-scavenging, and 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical cation decolorization assays. Furthermore, the major constituents in EEP were identified by high-performance liquid chromatography (HPLC) analysis with a photodiode array (PDA) and mass spectrometric (MS) detection, and each component was quantitatively analyzed. All propolis samples except that from Yunnan had relatively strong antioxidant activity accompanied by high total polyphenol contents. Propolis with strong antioxidant activity contained large amounts of antioxidative compounds, such as caffeic acid, ferulic acid and caffeic acid phenethyl ester. On the other hand, propolis from Yunnan and Hainan had compounds not present in propolis from other areas.     

Synthesis and thermal cure of high molecular weight polybenzoxazine precursors and the properties of the thermosets

High molecular weight polybenzoxazine precursors have been synthesized from aromatic or aliphatic diamine and bisphenol-A with paraformaldehyde. The precursors were obtained as soluble white powder. Molecular weight was estimated from the size exclusion chromatography to be several thousands. The structure of the precursors was confirmed by IR, ¹H NMR and elemental analysis, indicating the presence of cyclic benzoxazine structure. The ratio of the ring-closed benzoxazine structure and the ring-opened structure in the high molecular weight precursor was estimated from ¹H NMR spectrum and also from the exotherm of DSC, showing that the ratio of the ring-closed benzoxazine structure was 77–98%. The precursor solution was cast on glass plate, giving transparent and self-standing precursor films, which was thermally cured up to 240 °C to give brown transparent polybenzoxazine films. The toughness of the crosslinked polybenzoxazine films from the high molecular weight precursors was greatly enhanced compared with the cured film from the typical low molecular weight monomer. Tensile measurement of the polybenzoxazine films revealed that polybenzoxazine from aromatic diamine exhibited the highest strength and modulus. While, polybenzoxazine from longer aliphatic diamine had higher elongation at break. The viscoelastic analyses showed that the glass transition temperature of the polybenzoxazines derived from the high molecular weight precursors were as high as 238–260 °C. Additionally, these novel polybenzoxazine thermosets showed excellent thermal stability.     

Condensation enhancement on a vertical plate (1st report,heat transfer characteristic on a dispersed finned surface)

In this study, a condensation heat transfer experiment on vertical continuous and dispersed finned surfaces using FC5312 was carried out. Experimental parameters were the pitch and height of the fin, and the dispersed fin length. In the results, the phenomena of condensate retention were observed in the bottom of each row of the dispersed fin. The condensate flow from the upper row was concentrated into the valley of the fin and then flowed down into the valley of the next fin. Moreover, it was found from the experiment that the heat transfer coefficient on the dispersed finned surface was lower than the one on the continuous finned surface as the fin pitch was smaller, but was larger than that of the continued finned surface for a larger fin pitch. Furthermore, the heat transfer enhancing effect became more significant for the higher fin with the larger fin pitch, and the heat transfer reducing effect became more significant for the lower fin with the smaller fin pitch. These special characteristics of condensation mentioned above were caused by the phenomena of condensate retention in each row of the fin and the flow pattern of the condensate between two adjacent fins on the dispersed finned surface based on experimental observations. © 2008 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20221     

Structural,mechanical and thermal studies of double‐molded isotactic polypropylene nanocomposites with multiwalled carbon nanotubes

Nanocomposites of isotactic polypropylene (iPP) and multiwalled carbon nanotubes (MWCNTs) with various contents of MWCNTs were fabricated by double molding techniques. X‐ray diffraction measurements reveal a development of α‐crystal with lamellar stacks having a long period of 150 Å in the neat iPP that increases to 165 Å in 2 wt % MWCNTs‐loaded composites, indicating that MWCNTs enhance crystallization of iPP as a nucleating factor. Mechanical properties, such as tensile strength, flexural strength, Young's modulus, tangent modulus, and microhardness are found to increase with increasing MWCNTs content. Thermal analyses represent an increase of crystallization and melting temperatures and a decrease of thermal stability of the composites with increasing MWCNTs. Changes in structural, mechanical, and thermal properties of the composites due to the addition of MWCNTs are elaborately discussed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010