Photoelectrochemical properties of sol–gel-derived Ti1−xVxO2 solid solution film photoelectrodes

Ti_1−xV_xO₂ solid solution film photoelectrodes were prepared by the dip-coating sol–gel method. X-ray diffraction and X-ray photoelectron spectroscopy were employed to ensure the formation of the solid solution and their composition. Obvious photoresponses were observed in the visible region for the solid solution film electrodes with x0.05 and the red shift of the photoresponse was enhanced with increasing x. Moreover, the solid solution film electrodes were found to be photoelectrochemically stable. However, the onset potential of photocurrent shifted positively with increasing x. Band model of the solid solution was suggested to explain the effects of the vanadium incorporation on the photoelectrochemical properties.     

Nanocrystalline orthoferrite powders: Synthesis and magnetic properties

Nanocrystalline orthoferrite powders were synthesised at low temperatures by employing an aqueous sol–gel process. Colloidal sols and water re-dispersible gels of orthoferrite precursors were prepared by room-temperature processing of inexpensive metal salts. The average diameter (Z_av) of the precursor particles was in the size range from 4 to 7 nm; the diameters had a narrow size distribution. Water re-dispersible translucent gel monoliths were obtained by concentrating the aqueous sols followed by drying them under reduced pressure (10⁻² Torr) at room temperature. The sol–gel transition was found to be completely reversible. Nanocrystalline fine powders of orthoferrites of general formula, LnFeO₃ (Ln = La, Sm, Gd, Dy, Er, Yb and Y) having a crystallite size of about 25 nm were prepared by heating the gel precursors at 650–700 °C in air. Powder X-ray diffraction and thermogravimetry, respectively, were employed to identify perovskite phase formation and delineate thermal events that lead to gel to crystallite conversion. Magnetic measurements were carried out on the resultant powders at room temperature and down to 40 K. Nanocrystalline orthoferrite powders exhibited weak ferromagnetic behaviour, and reduced magnetic moments.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

可动凝胶深部调驱候选井筛选方法研究

根据可动凝胶深部调驱机理,结合注水井和对应油井的静、动态特征,筛选出了用于确定最佳调驱井的指标体系,并采用变权的模糊综合评判方法进行多因素定量评价。结果表明,用渗透率非均质性、吸水剖面非均质性、吸水强度、井口压降曲线、含水-采出程度对应关系、油水井连通程度、油层未动用程度及沉积相特征等指标来筛选调驱注入井可提高选井的可靠性,保证可动凝胶深部调驱的效果。     

凝胶过滤色谱测定高分子量聚乙烯醇分子量和分子量分布

用凝胶过滤色谱对高分子量聚乙烯醇分子量、分子量分布进行剖析。采用Plaquagel-OH色谱柱,0.25mol/LNaNO3,0.01mol/L Na2HPO4-NaH2PO,pH=7的缓冲溶液流动相,流速1ml/min,示差折光检测器,柱温30℃,聚环氧乙烷作标准物。该方法能显著缩短分析时间,提高准确性,可用于对高聚合度聚乙烯醇进行研究和指导生产。     

Inside Front Cover: Three‐Dimensionally Ordered Gold Nanocrystal/Silica Superlattice Thin Films Synthesized via Sol–Gel Self‐Assembly (Adv. Funct. Mater. 7/2006)

The synthesis of three‐dimensionally ordered, transparent gold‐nanocrystal (NC)/silica superlattice thin films using the self‐assembly (by spin‐coating) of water‐soluble gold nanocrystal micelles and soluble silica is reported by Fan and co‐workers on p. 891. The robust, 3D NC/silica superlattice films are of interest for the development of collective optical and electronic phenomena, and, importantly, for the integration of NC arrays into device architectures. Nanocrystals and their ordered arrays hold many important applications in fields such as catalysis, surface‐enhanced Raman spectroscopy based sensors, memory storage, and electronic and optical nanodevices. Herein, a simple and general method to synthesize ordered, three‐dimensional, transparent gold nanocrystal/silica superlattice thin films by self‐assembly of gold nanocrystal micelles with silica or organosilsesquioxane by spin‐coating is reported. The self‐assembly process is conducted under acidic sol–gel conditions (ca. pH 2), ensuring spin‐solution homogeneity and stability and facilitating the formation of ordered and transparent gold nanocrystal/silica films. The monodisperse nanocrystals are organized within inorganic host matrices as a face‐centered cubic mesostructure, and characterized by transmission electron spectroscopy and X‐ray diffraction.     

Effects and properties of poly(arylene ether benzonitrile)s of various molecular weights blended with sulfonated poly(ether ether ketone)

Poly(arylene ether benzonitrile) (PAEBN) was synthesized with 2,6‐dichlorobenzonitrile and biphenol. PAEBNs with various molecular weights (MWs), 1,640,000 and 185,000 g/mol, were synthesized by control of the stoichiometry of the monomers and were blended with sulfonated poly(ether ether ketone) (SPEEK). The effects of MW on the water uptake, swelling, methanol permeability, and proton conductivity of the SPEEK/PAEBN blend membranes were investigated. The molecular mobility of the SPEEK/PAEBN blends was also examined in this study. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

利用废硅胶生产五水偏硅酸钠的研究

概述了五水偏硅酸钠的市场现状,介绍了以废硅胶为原料生产五水偏硅酸钠的实验方法。通过实验,得出了优化实验条件为:模数采用0.5~0.8,波美度在35~50°,加热废硅胶及浓缩结晶的温度为90~100℃,时间为持续沸腾5min以上,采用自然降温法,时间在10h左右。最终制得良好的晶体,其中氧化钠含量为28.5%,氧化硅含量27.3%,产品质量达到国内同类产品的一级品标准。     

Effects of processing conditions on the curing of a vinyl ester resin

The effects of temperature, initiator, and accelerator levels on the curing of an epoxy bisphenol‐A vinyl ester resin Derakane® 411‐45 (formulated with styrene) were investigated by gel‐time and exotherm‐peak measurements on bulk samples. It was observed that the gel time was reduced as the initiator or accelerator ratio increased. Except at higher contents of the accelerator, a small kinetic plateau was seen in the gel curve and a shift of the maximum exotherm toward high temperatures in the DSC curves. This was explained by the dual role played by the accelerator species. A regression analysis of all gel‐time data showed a dependence of 3/2 order in the accelerator and first order in the initiator concentrations. Thus, for this polymerization initiation system, the gel time can be predicted for any initiator and cobalt levels and at any temperature within the ranges studied. The effect of the initiator on the unreacted styrene and vinyl ester was also examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1146–1154, 2002; DOI 10.1002/app.10403     

埕岛油田馆陶组油藏调剖技术初探

讨论了埕岛油田注水井调剖中施工场地、调剖剂配制水选择以及井下防砂管等因素对调剖施工方式的影响。分析了多种类型调剖剂的适应性,筛选出冻胶类调剖剂作为埕岛油田的调剖剂。研制出由改性HPAM为主剂、Cr3 有机络合物为交联剂和以金属络合物为主的交联稳定剂组成的HST-1型海水基冻胶调剖剂,并用于CB251A-6井调剖,取得了良好效果。探索出了一套适用于埕岛油田不动管柱、海水配制调剖剂和采用船载施工设备进行现场施工的注水井调剖工艺。